BNR 400+ HP Twins from RX-7 Store?
#251
Pineapple Racer
iTrader: (1)
Yeah, that would be realy cool if you could post em for the masses.
To be honest, probably within a two weeks I'll either be shipping my twins to BNR or ordering a to4s. A dyno sheet (Even if it is the 1st run, without a backup run) from the twins could realy sway me to buy the Seceret weapons. I just wanna see some proof of these puppys first....not that I don't trust everyone, its just that I do my research very carefully on every mod I do, and don't want to be unhappy. You know what I'm saying?
CJ
To be honest, probably within a two weeks I'll either be shipping my twins to BNR or ordering a to4s. A dyno sheet (Even if it is the 1st run, without a backup run) from the twins could realy sway me to buy the Seceret weapons. I just wanna see some proof of these puppys first....not that I don't trust everyone, its just that I do my research very carefully on every mod I do, and don't want to be unhappy. You know what I'm saying?
CJ
#252
Banned. I got OWNED!!!
Join Date: May 2002
Location: East Coast,USA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
This is total BULLSHIT. I will pay you to download those dyno sheets. You could not get 400 HP if you wanted to. I think you are full of Poo Poo. Fouled plugs is a ernie T excuse if I ever heard one. Please load them up DONKEYS
You aint got Nothing
You aint got Nothing
#254
Rotary Enthusiast
must admit that while having 2 dynos from different shops is a good way to show up the skeptics, but posting the initial dyno sheet would go a LONG way to sharing your findings and helping to prove your stated performance.
Personally, I hope the #'s are consistent, but I don't have a vested interest for at 9+ months so I can wait.
Personally, I hope the #'s are consistent, but I don't have a vested interest for at 9+ months so I can wait.
#255
Rotary Enthusiast
Join Date: Mar 2001
Location: Mechanicsburg, PA USA
Posts: 1,392
Likes: 0
Received 0 Likes
on
0 Posts
I know Stephen wouldn't BS on this forum - and Bryan from BNR called me and left a message on my machine he was so excited - why would he do this if it was BS - both Stephen and Bryan are very respected here - 465 rwhp is a lot of beef but you should see the work Bryan puts into these turbos. I've seen them finished and the work is second to none. I'd like to see the sheets though - my sheets should be up before Stephen's second run - I know Rich is getting some secret weapons and should be dynoed in a week or 2 - nothing like waiting........
#256
Rotary Enthusiast
I am actually quite anxious and love the idea of these things being efficient duals. I was planning on staying at 330 range.... but the idea of being able to get a solid 420+ is extremely intriguing.
#257
Hey, where did my $$$ go?
Join Date: Feb 2001
Location: Bimingham, AL
Posts: 4,413
Likes: 0
Received 0 Likes
on
0 Posts
Guys I know it sucks but I dont have any way of posting them into my computer. I'm going to the dyno jet in about a week and a half and they said they can put them on disk for me and he might can even host them on thier site so I can do links to it.
I'm sorry its turned out like this, I was supposed to get sheets over the weekend but it didnt happen, sorry.
I'm doing my best to get sheets to you guys, we own a business so the end of the year is very busy for me and I dont have much time. I'm friends with the dyno shot and he's calling me the day its ready to come up there. It will be soon I promise.
STEPHEN
I'm sorry its turned out like this, I was supposed to get sheets over the weekend but it didnt happen, sorry.
I'm doing my best to get sheets to you guys, we own a business so the end of the year is very busy for me and I dont have much time. I'm friends with the dyno shot and he's calling me the day its ready to come up there. It will be soon I promise.
STEPHEN
#259
WTB** Very Low Miles 94-95
Join Date: Jul 2001
Location: Tejas
Posts: 3,298
Likes: 0
Received 0 Likes
on
0 Posts
send me an email stephen when you get them done...i will post them on my website for you if you cant get them up on the site here.
you can paste the link in here to the spot on my website.
take pics with a digital cam...surely one of you all out there has a digital cam...then post the pic.
j
you can paste the link in here to the spot on my website.
take pics with a digital cam...surely one of you all out there has a digital cam...then post the pic.
j
#260
Super Newbie
Originally posted by SPOautos
Guys I know it sucks but I dont have any way of posting them into my computer. I'm going to the dyno jet in about a week and a half and they said they can put them on disk for me and he might can even host them on thier site so I can do links to it.
I'm sorry its turned out like this, I was supposed to get sheets over the weekend but it didnt happen, sorry.
I'm doing my best to get sheets to you guys, we own a business so the end of the year is very busy for me and I dont have much time. I'm friends with the dyno shot and he's calling me the day its ready to come up there. It will be soon I promise.
STEPHEN
Guys I know it sucks but I dont have any way of posting them into my computer. I'm going to the dyno jet in about a week and a half and they said they can put them on disk for me and he might can even host them on thier site so I can do links to it.
I'm sorry its turned out like this, I was supposed to get sheets over the weekend but it didnt happen, sorry.
I'm doing my best to get sheets to you guys, we own a business so the end of the year is very busy for me and I dont have much time. I'm friends with the dyno shot and he's calling me the day its ready to come up there. It will be soon I promise.
STEPHEN
#262
Infamous...Butcher...
Join Date: Feb 2002
Location: WA
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by artguy
i agree....post the plots and say that they are only preliminary charts...
after all the hubbub i feel like i went on a date with a hot dancer and didnt get any at the end of the night.
j
i agree....post the plots and say that they are only preliminary charts...
after all the hubbub i feel like i went on a date with a hot dancer and didnt get any at the end of the night.
j
Heh, but did the hot dancer say "Ill call you in a couple of weeks?" Thats almost worse!
I am extremely interested too, I've put off the 99 spec turbos until I can see these results. 86k on the stockers and the old gray mares ain't what they used to be
#264
Rotary Enthusiast
Exactly!
Originally posted by BicuspiD
ROFL
Heh, but did the hot dancer say "Ill call you in a couple of weeks?" Thats almost worse!
I am extremely interested too, I've put off the 99 spec turbos until I can see these results. 86k on the stockers and the old gray mares ain't what they used to be
ROFL
Heh, but did the hot dancer say "Ill call you in a couple of weeks?" Thats almost worse!
I am extremely interested too, I've put off the 99 spec turbos until I can see these results. 86k on the stockers and the old gray mares ain't what they used to be
#266
I HATE sleepy eyes
Join Date: Nov 2001
Location: Birmingham, AL
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Dr. Strange
This is total BULLSHIT. I will pay you to download those dyno sheets. You could not get 400 HP if you wanted to. I think you are full of Poo Poo. Fouled plugs is a ernie T excuse if I ever heard one. Please load them up DONKEYS
You aint got Nothing
This is total BULLSHIT. I will pay you to download those dyno sheets. You could not get 400 HP if you wanted to. I think you are full of Poo Poo. Fouled plugs is a ernie T excuse if I ever heard one. Please load them up DONKEYS
You aint got Nothing
#270
Original Gangster/Rotary!
iTrader: (213)
Originally posted by pp13bnos
I don't understand why it has'nt been posted yet. I guess we'll just have to wait for Rich to do the job. CJ
I don't understand why it has'nt been posted yet. I guess we'll just have to wait for Rich to do the job. CJ
Seriously, I'm waiting on my housings back (ends and intermediate gettin' lapped) to put the motor together and for the turbos from BNR. Break-in shouldn't take too long--I can pile on the miles pretty quickly when motivated . Expect sometime toward the end of the month.
#271
Passenger
Posts: n/a
Originally posted by GoodfellaFD3S
That's what all the ladies tell me
Seriously, I'm waiting on my housings back (ends and intermediate gettin' lapped) to put the motor together and for the turbos from BNR. Break-in shouldn't take too long--I can pile on the miles pretty quickly when motivated . Expect sometime toward the end of the month.
That's what all the ladies tell me
Seriously, I'm waiting on my housings back (ends and intermediate gettin' lapped) to put the motor together and for the turbos from BNR. Break-in shouldn't take too long--I can pile on the miles pretty quickly when motivated . Expect sometime toward the end of the month.
Something smells real fishy here not sure what it is
#274
Original Gangster/Rotary!
iTrader: (213)
Originally posted by ptrhahn
I wanna see 400+ SEQUENTIAL RWHP.
That'll loosen my plastic up real quickly.
Good luck guys!
I wanna see 400+ SEQUENTIAL RWHP.
That'll loosen my plastic up real quickly.
Good luck guys!
And what exactly happens when your plastic loosens? Your diaper falls off ?
Rich
#275
Lives on the Forum
iTrader: (9)
Originally posted by GoodfellaFD3S
I decided to go parallel after talking to Brian at BNR and Steve Kan about it extensively. I'll be able to remove all the brittle solenoids and check valves, and won't have to worry about spike issues. Also, the dynamic seal turbos spool so quickly that boost lag isn't much of an issue. Running 17 psi, SPOautos had 10psi by 3000 rpm and full boost by 3800. The sequentials are better suited to a stock car with plugged up exhaust and intake.
And what exactly happens when your plastic loosens? Your diaper falls off ?
Rich
I decided to go parallel after talking to Brian at BNR and Steve Kan about it extensively. I'll be able to remove all the brittle solenoids and check valves, and won't have to worry about spike issues. Also, the dynamic seal turbos spool so quickly that boost lag isn't much of an issue. Running 17 psi, SPOautos had 10psi by 3000 rpm and full boost by 3800. The sequentials are better suited to a stock car with plugged up exhaust and intake.
And what exactly happens when your plastic loosens? Your diaper falls off ?
Rich
The plastic being my credit card.