Blitz IC from RX7store.com damaged, what should I do?
Passenger
Posts: n/a
Blitz IC from RX7store.com damaged, what should I do?
Everyone,
I open my new Blitz SMIC only to find it was damaged. The box it was shipped in appeard fine, the unit is damaged. I have attached a pic. I have appointment tomorrow with my tuner to get a Power FC and have it tuned for the blitz + my other mods. What would you guys do? Can this be fixed?
If you look at the link http://66.216.67.51/product.asp?0=215&1=303&3=414 You will see that it shows it polished, yet it arrives unpolished, I can deal with that, but for 850.00 and it to arrived damaged kind of p*sses me off. I guess I need to vent.
I open my new Blitz SMIC only to find it was damaged. The box it was shipped in appeard fine, the unit is damaged. I have attached a pic. I have appointment tomorrow with my tuner to get a Power FC and have it tuned for the blitz + my other mods. What would you guys do? Can this be fixed?
If you look at the link http://66.216.67.51/product.asp?0=215&1=303&3=414 You will see that it shows it polished, yet it arrives unpolished, I can deal with that, but for 850.00 and it to arrived damaged kind of p*sses me off. I guess I need to vent.
Full Member
Joined: Mar 2001
Posts: 170
Likes: 0
From: Turtle Creek, Pa, USA (Sub of Pittsburgh)
Thats a pretty good smack, Should not hurt anything and you won't even see it very well once installed. put it on for the tuning and see what Jason can do about replacing it later.
OG
Joined: Feb 2001
Posts: 1,291
Likes: 1
From: Pleasanton,California
1. hold the camera more steady so you dont get blur
2. Call and talk to Jason...before you bitch..product should be insured when it was shipped...so I presume you will be alright there
3. post this is the proper section..
4. If it says polished...I would demand that it would be polished
2. Call and talk to Jason...before you bitch..product should be insured when it was shipped...so I presume you will be alright there
3. post this is the proper section..
4. If it says polished...I would demand that it would be polished
Hey,
I noticed this post before checking my email. It is insured and can be replaced. I will checkout the pics you sent me and send you an email.
I freaking hate UPS.
Jason
www.rx7store.net
I noticed this post before checking my email. It is insured and can be replaced. I will checkout the pics you sent me and send you an email.
I freaking hate UPS.
Jason
www.rx7store.net
Passenger
Posts: n/a
Originally posted by Johnny
1. hold the camera more steady so you dont get blur
2. Call and talk to Jason...before you bitch..product should be insured when it was shipped...so I presume you will be alright there
3. post this is the proper section..
4. If it says polished...I would demand that it would be polished
1. hold the camera more steady so you dont get blur
2. Call and talk to Jason...before you bitch..product should be insured when it was shipped...so I presume you will be alright there
3. post this is the proper section..
4. If it says polished...I would demand that it would be polished
I sent emails to Jason, I don't have till Monday to wait for a reply from him as I have an appointment with rx7fasion to get this installed.
I did not SAY polished , it was polished in the picture and it did not say anywhere that it was NOT polished.
As far as me "Bitching" as you so elegantly stated, I know nothing of intercoolers I don't know if that dent will restrict the exhaust or whatever, or even if that can be pulled out. Maybe someone on this forum will know. I have found Jason and the RX7store to have a few problems with some of my orders and stuff, but Jason ALWAYS comes through for the customer, so I am not BITCHING about the RX7store or Jason. So if I was Pissed earlier, I think I had a right to be and before you get up off your throne and realize you are not the great dispenser of everything that is good, proper and wholesome, put your self in my position and take a chill, ok?
Banned. I got OWNED!!!
Joined: Mar 2001
Posts: 1,008
Likes: 0
From: Bannished
Did you talk to vendor before you vented here?
Did you open the package in front of the delivery person?
Did you learn something today?
I did...don't change a clutch without ALL the right tools in front of you.
Regards.
Did you open the package in front of the delivery person?
Did you learn something today?
I did...don't change a clutch without ALL the right tools in front of you.
Regards.
Trending Topics
Passenger
Posts: n/a
Originally posted by Jason
Hey,
I noticed this post before checking my email. It is insured and can be replaced. I will checkout the pics you sent me and send you an email.
I freaking hate UPS.
Jason
www.rx7store.net
Hey,
I noticed this post before checking my email. It is insured and can be replaced. I will checkout the pics you sent me and send you an email.
I freaking hate UPS.
Jason
www.rx7store.net
Thanks Jason!
Passenger
Posts: n/a
Originally posted by Badog
Did you talk to vendor before you vented here?
Did you open the package in front of the delivery person?
Did you learn something today?
I did...don't change a clutch without ALL the right tools in front of you.
Regards.
Did you talk to vendor before you vented here?
Did you open the package in front of the delivery person?
Did you learn something today?
I did...don't change a clutch without ALL the right tools in front of you.
Regards.
Thanks for all that replied anyway.
That dent shouldn't noticeably affect your air flow. I'd use that dented intercooler any day of the week over the POS stock intercooler I'm running now. Jason, are you going to have a scratch and dent sale after you settle with UPS?
Last edited by ziftar; Jun 14, 2002 at 11:09 PM.
Originally posted by ziftar
That dent shouldn't noticeably affect your air flow. I'd use that dented intercooler any day of the week over the POS stock intercooler I'm running now. Jason, are you going to have a scratch and dent sale after you settle with UPS?
That dent shouldn't noticeably affect your air flow. I'd use that dented intercooler any day of the week over the POS stock intercooler I'm running now. Jason, are you going to have a scratch and dent sale after you settle with UPS?
Jason
Rotary Enthusiast
Joined: Jul 2001
Posts: 1,087
Likes: 0
From: Nashville, TN
Hey...just so you know I used to work at UPS. And **** gets thrown a lot, whether you put a fragile sticker or not.
Items can get messed up with out the box getting mangled. Make sure the packing inside the box minimizes the amount of force the items recieve. I now work part time at an aerospace company in the shipping department...now UPS is the enemy
Items can get messed up with out the box getting mangled. Make sure the packing inside the box minimizes the amount of force the items recieve. I now work part time at an aerospace company in the shipping department...now UPS is the enemy
OG
Joined: Feb 2001
Posts: 1,291
Likes: 1
From: Pleasanton,California
Originally posted by OneKrazyGuy
Talk about bitching. I'd rather you not have even replied. As far as what section, I am not sure what the proper section is, forgive me.
I sent emails to Jason, I don't have till Monday to wait for a reply from him as I have an appointment with rx7fasion to get this installed.
I did not SAY polished , it was polished in the picture and it did not say anywhere that it was NOT polished.
As far as me "Bitching" as you so elegantly stated, I know nothing of intercoolers I don't know if that d
ent will restrict the exhaust or whatever, or even if that can be pulled out. Maybe someone on this forum will know. I have found Jason and the RX7store to have a few problems with some of my orders and stuff, but Jason ALWAYS comes through for the customer, so I am not BITCHING about the RX7store or Jason. So if I was Pissed earlier, I think I had a right to be and before you get up off your throne and realize you are not the great dispenser of everything that is good, proper and wholesome, put your self in my position and take a chill, ok?
Talk about bitching. I'd rather you not have even replied. As far as what section, I am not sure what the proper section is, forgive me.
I sent emails to Jason, I don't have till Monday to wait for a reply from him as I have an appointment with rx7fasion to get this installed.
I did not SAY polished , it was polished in the picture and it did not say anywhere that it was NOT polished.
As far as me "Bitching" as you so elegantly stated, I know nothing of intercoolers I don't know if that d
ent will restrict the exhaust or whatever, or even if that can be pulled out. Maybe someone on this forum will know. I have found Jason and the RX7store to have a few problems with some of my orders and stuff, but Jason ALWAYS comes through for the customer, so I am not BITCHING about the RX7store or Jason. So if I was Pissed earlier, I think I had a right to be and before you get up off your throne and realize you are not the great dispenser of everything that is good, proper and wholesome, put your self in my position and take a chill, ok?
your post did kind of sound like you where bitching about the rx7store...which I dont really give a hell...not really sticking up for the store ..but jumping to conclusions as a whole...which seems to be happening far to often in the forum lately...
I realize you are pretty bummed since you have an appointment to get this all installed tomorrow and I know sometimes it's can be hard to appointments at Ricks (I use him too)
Ok your venting...just chose your words wisely and maybe post in the lounge next times...and sarcastics ******** may stay away
peace...and this thread is now closed
Thread
Thread Starter
Forum
Replies
Last Post