Rotarded

I am preparing to install the New Volt in my FD. I have the B&M universal instructions, and the Factory manual and wiring diagram.

Can anyone help me with any FD specific instructions and or experiences?? Just being my usual careful self. Thanks for any info in advance.

Mike

Rotarded

C'mon, someone's put this in! A little help??

911GT2

I can't help, but I'll bump for ya

And to make it somewhat worth while, what is a B&M New Volt?

DomFD3S

http://store.summitracing.com/produc...earchType=ECat

I know there are some japanese companies which sell this product (under their name,...possibly licensed to do so).

HedgeHog

From what I can recall, you splice the supply line to the coil packs for the B&M to fit in. The red wire goes to the harness side of the supply line and the orange wire (B&M) goes to the coil.

According to Z-28 of the mini FD3S manual, it's the B/W wire on connector B1-14. IIRC, I spliced mine after the harness; that is, between the harness and the coils. To mount the B&M, I mounted it on an aluminum plate which, in turn, is mounted onto the frame.



HTH

DaedelGT

Hedge, who makes that IC duct? It looks really really really good.

HedgeHog

Thx...that'll be the work of Duane @Crooked Willow. http://www.crookedwillow.com/intercool.htm

I was one of the lucky few who got one from him...i believe Atihun is making one to fit the CWR IC.

rfreeman27

iTrader: (5)

yeah i wish he still made the i/c and duct

Rotarded

Thanks Hedge!!

I had PM'd your (on forcefed) about this but hadn't gotten a reply! Thanks again!

Mike