Mazda Restoration Reproduction Parts Program for the FC and FD
#51
needs more track time
iTrader: (16)
I think it used to be by model. R1 got a smoke tint vs some other color (bronze?). I remember that b/c I had to replace a side window once.
I'm also on the market for a windshield. Preferably in OEM tint for my R1.
Ray Crowe informs that nothing is available
I'm also on the market for a windshield. Preferably in OEM tint for my R1.
Ray Crowe informs that nothing is available
Last edited by gracer7-rx7; 04-08-20 at 01:17 PM.
#52
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,849
Received 2,609 Likes
on
1,851 Posts
#53
Full Member
That's quite a range in the pricing.
Any reason to think that the 93/94/96+ are different from each other in terms of fitment?
I understand the tints may be different.
Any reason to think that the 93/94/96+ are different from each other in terms of fitment?
I understand the tints may be different.
The following 2 users liked this post by neit_jnf:
Macer (12-21-20),
Veilside Bunny (12-17-20)
#55
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,849
Received 2,609 Likes
on
1,851 Posts
list has been updated again, nothing exciting, but its all stuff that helps keep the thing on the road
https://www.mazda.co.jp/globalassets...tslist_rx7.pdf
https://www.mazda.co.jp/globalassets...tslist_rx7.pdf
#56
Senior Member
iTrader: (16)
I can not speak for the r-1 or the later model cars. Having said that, when I bought my touring project ( red car ) some 15 + years ago I had to source a windshield and drivers side glass. The touring front shield was a bronze tint sunshade. The side glass was also the same bronze ( appeared dirty brown ) tint. When I bought a piece of door glass off of eBay, it came in a blue tint that did not match the passenger window. I was able to source one from Fritz that was the correct shade. This car was a very early 01/92 build date. Not sure if that has a bearing. I do know that they went to the blue tint sunshade in 94-95. Again I’m not sure after 95 tho.
The base model ( black car ) is the same build date and has the original windshield. The following pictures are of the shade differences. A glass guy told me the easiest way to see this is use a sheet of paper. Here are a few pics for reference.
The base model ( black car ) is the same build date and has the original windshield. The following pictures are of the shade differences. A glass guy told me the easiest way to see this is use a sheet of paper. Here are a few pics for reference.
#57
JM1FD since 1999
iTrader: (15)
https://www.automesseweb.jp/2023/03/11/1250743
Article suggests Mazda will begin the restoration program for the FD chassis next year. Owners can send their cars to Mazda to restore.
Article suggests Mazda will begin the restoration program for the FD chassis next year. Owners can send their cars to Mazda to restore.
#58
10000 RPM Lane
iTrader: (2)
honestly think that if you already have an engine and/or aftermarket parts you can order up the main components for a significant engine overhaul individually and direct from Japan rather than be waiting on a new keg.
all three irons, two rotors, and two rotor housings is coming up at ~$3,900 all-in shipped.
especially compared to the one new keg on here being offered at $7,500. Probably going to add another $500 - $600 to ship it if not local.
some of the USA prices make no sense to me compared to just importing them direct, and they’re all available within a week or two.
.
all three irons, two rotors, and two rotor housings is coming up at ~$3,900 all-in shipped.
especially compared to the one new keg on here being offered at $7,500. Probably going to add another $500 - $600 to ship it if not local.
some of the USA prices make no sense to me compared to just importing them direct, and they’re all available within a week or two.
.
The following users liked this post:
XxBoostinxX (03-27-23)
#60
Eats, Sleeps, Dreams Rotary
iTrader: (283)
honestly think that if you already have an engine and/or aftermarket parts you can order up the main components for a significant engine overhaul individually and direct from Japan rather than be waiting on a new keg.
all three irons, two rotors, and two rotor housings is coming up at ~$3,900 all-in shipped.
especially compared to the one new keg on here being offered at $7,500. Probably going to add another $500 - $600 to ship it if not local.
some of the USA prices make no sense to me compared to just importing them direct, and they’re all available within a week or two.
.
all three irons, two rotors, and two rotor housings is coming up at ~$3,900 all-in shipped.
especially compared to the one new keg on here being offered at $7,500. Probably going to add another $500 - $600 to ship it if not local.
some of the USA prices make no sense to me compared to just importing them direct, and they’re all available within a week or two.
.
#61
10000 RPM Lane
iTrader: (2)
if they need a factory stock engine and the additional services, then ok 👍
people with the Motorsport option can get some of the major parts for about the same or slightly higher than the Japan direct option depending on whether it qualifies for free shipping from Motorsports ($900+ order), but don’t forget to include tax. The S4 8.5CR rotors I ordered from JP ended up over $200 each less once everything was all in on both sides.
It’s an option though if certain parts are on backorder here vs. available in Japan.
.
people with the Motorsport option can get some of the major parts for about the same or slightly higher than the Japan direct option depending on whether it qualifies for free shipping from Motorsports ($900+ order), but don’t forget to include tax. The S4 8.5CR rotors I ordered from JP ended up over $200 each less once everything was all in on both sides.
It’s an option though if certain parts are on backorder here vs. available in Japan.
.
#62
rotorhead
iTrader: (3)
list has been updated again, nothing exciting, but its all stuff that helps keep the thing on the road
https://www.mazda.co.jp/globalassets...tslist_rx7.pdf
https://www.mazda.co.jp/globalassets...tslist_rx7.pdf
Low volume?
#63
Full Member
Do we know what parts will be available? I hope interior parts and pieces.
#64
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,849
Received 2,609 Likes
on
1,851 Posts
The following users liked this post:
XxBoostinxX (03-27-23)
#65
Full Member
#66
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,849
Received 2,609 Likes
on
1,851 Posts
The following users liked this post:
GoodfellaFD3S (03-28-23)
Thread
Thread Starter
Forum
Replies
Last Post
Hypertek
2nd Generation Non-Technical and pictures
2
01-22-09 04:13 PM
87GTR
Power FC Forum
1
12-30-05 04:52 PM