*engine bay pics*
#1277
FD Project
iTrader: (58)
Gordon and to slow thanks for the nice comments, still lots of work left to go.
phrost the hardest part of the re intake swap was the throttle body since i wanted to keep the idle control valve, i got the rotary works cosmo tb, you will have to modify the throttle cable and the compression elbow might have clearance issues if you are using a strut bar since the re intake is a little taller than the rew intake.
phrost the hardest part of the re intake swap was the throttle body since i wanted to keep the idle control valve, i got the rotary works cosmo tb, you will have to modify the throttle cable and the compression elbow might have clearance issues if you are using a strut bar since the re intake is a little taller than the rew intake.
#1278
Original Gangster/Rotary!
iTrader: (213)
Here's a CYM build that IRP recently completed. GT35R, Stage 3 streetport, RA Super Seals, GZ LIM, fuel system, water/meth injection etc etc. Goal is a 450 rwhp street car
#1284
Senior Member
iTrader: (3)
Join Date: Feb 2004
Location: california
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Up and running
Went to the mechanics shop yesterday and got to start it up and drive it around the lot a little. It has been down for 2 years after the engine went out. Converted to single with the rebuild. This is a pic he sent me a few weeks ago, more work has been done since.