*engine bay pics*
#1212
Veni, Vidi, Vici
iTrader: (4)
I had to show off my core. Yeah the thing under all the bling. 68k on this core. 5 years with the T78 !
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
#1215
Junior Member
Join Date: Jul 2005
Location: Salisbury, MA.
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
1st picture is what my engine bay used to look like. The other two are the "current work in progress" pictures. Changed out the the whole IC set up. Piping for the IC will go directly into the front end, and running dual oil coolers. That should help with heat! Vented hood on order, along with new front end. Still lots more to do!
#1216
Junior Member
Join Date: Aug 2002
Location: East Boston
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
1st picture is what my engine bay used to look like. The other two are the "current work in progress" pictures. Changed out the the whole IC set up. Piping for the IC will go directly into the front end, and running dual oil coolers. That should help with heat! Vented hood on order, along with new front end. Still lots more to do!
what can you tell us about your engine (if anything) stock? I can't wait to see the end results! The colors scheme really pops out with all the polishing. Very nice!
#1217
dorito powered
iTrader: (5)
Join Date: Mar 2008
Location: Lincoln, NE
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
mazdalover, it appears you still have the stock bov (bypassvalve, its the brown thing above the turbo-->intercooler piping) and an aftermarket bov (appears to be HKS). Is that correct?
#1223
Junior Member
Join Date: Jul 2005
Location: Salisbury, MA.
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
The twin turbo FD Rx-7 utilizes two BOV's one is used to as an actual bypass valve for the second turbo venting until 4500rpm when the rear turbo comes on line. The bypass valve (brown) is controlled by a solenoid and it closes the brown bypass valve to build boost on the second turbo. The aftermarket BOV is a Synapse, and this is used as a regular BOV.
#1224
Senior Member
Before and After
Before:
After (95%completed):
all thats left is install some pulleys (pineapple idler, matching purple alt and WP and AC tensioner),ceramic coat and wrap the dump and make a cold air intake tube to locate the filter down near the intercooler.
Brad.
After (95%completed):
all thats left is install some pulleys (pineapple idler, matching purple alt and WP and AC tensioner),ceramic coat and wrap the dump and make a cold air intake tube to locate the filter down near the intercooler.
Brad.