Spooled Up Racing's Turbo Swap Thread
#152
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
Well I got to the sanding tonight... I am done with the rough paper now and for the next two days I will be using 220g (maybe just the 150g) to get the perfect shine on them.. but here is some pictures from tonight
Exhaust ports
Front side on the intermediate iron
Rear side of the Intermediate iron
Intake ports on the intermediate iron
Rear iron port
What do u think?
Exhaust ports
Front side on the intermediate iron
Rear side of the Intermediate iron
Intake ports on the intermediate iron
Rear iron port
What do u think?
#155
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
Well I FINISHED sanding the ports tonight.. Tomorrow I will start bak to the rotors and get them 100% ready for the build then on to the next item in row....
I plan to have my table COMPLETELY organized by friday night... Saturday is the build...
I plan to have my table COMPLETELY organized by friday night... Saturday is the build...
#156
I really Schruted it
Join Date: Sep 2006
Location: Grand Rapids, MI
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
FYI- I don't think Spooled will be posting anymore on this thread. If you want to see the rest of the build you have to go to www.Rotarycarclub.com
B
B
#157
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
I am parting ways from this forum...
my build can be seen at
http://rotarycarclub.com/showthread.php?p=2824#post2824
LOTS of updates the engine is now together...
I just did not want anyone who had been watching this thread to not get to see it finish out..
my build can be seen at
http://rotarycarclub.com/showthread.php?p=2824#post2824
LOTS of updates the engine is now together...
I just did not want anyone who had been watching this thread to not get to see it finish out..
#158
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
Ok I could'nt leave you guys hangin...
here is all the stuff I have to update with...
look at the layers
waste leaves here
The real deal!
TONIGHT
since last time I have:
cleaned and painted the water pump housing
cleaned and painted both fuel rails
cleaned and painted the thermostat neck
pulled the turbo apart (found the exhaust housing is junk) clean and painted the compressor housing
mounted the upper intake
mounted the upper fuel rail (need to put injectors in of course)
put the water pump housing on (awaiting water pump)
here are some pictures
here is all the stuff I have to update with...
look at the layers
waste leaves here
The real deal!
TONIGHT
since last time I have:
cleaned and painted the water pump housing
cleaned and painted both fuel rails
cleaned and painted the thermostat neck
pulled the turbo apart (found the exhaust housing is junk) clean and painted the compressor housing
mounted the upper intake
mounted the upper fuel rail (need to put injectors in of course)
put the water pump housing on (awaiting water pump)
here are some pictures
#162
Apex Seal Treachery!!!!!!
iTrader: (13)
Good stuff!!! I haven't read the whole thread, but will catch up when time permits. I've got a S5 JDM swapped into my 89 vert. Eventually I'd love to pull my engine and do my first engine rebuild. Hopefully I can learn a little from the work you've done. I like the color change on the " 13B Mazda" on the housings. I'd love to see how the paint holds up over time.
Oh, and welcome back to the forums and thanks for continuing to share.
Oh, and welcome back to the forums and thanks for continuing to share.
#163
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
well in the last two weeks you have not missed anything besides me assembling the engine and now just cleaning.. I hope to install the engine soon... the only thing stopping me is I need a flywheel and clutch kit.. once I get those the engine will be going on..
the other engine is about 2 engine mounts away from coming out.. but I will wait to pull that for the day I put this engine in..
the other engine is about 2 engine mounts away from coming out.. but I will wait to pull that for the day I put this engine in..
#164
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
here are pics u missed (copied so don't read into the words to much)
Ok so me and RX7tuner built the engine yesterday... it was alot of fun, we had alot of laughs a few head scratchers and well something that just made us go WOW
but here it is as of tonight...
The control rings with the o-rings installed
Installed in the rotors
The rotors are all lubed up with Crisco
This iron has the o-rings installed and layered with crisco
umm yeah there I am .... with the shaft!!!
1 plate at a time
Getting closer
Together
Ok so me and RX7tuner built the engine yesterday... it was alot of fun, we had alot of laughs a few head scratchers and well something that just made us go WOW
but here it is as of tonight...
The control rings with the o-rings installed
Installed in the rotors
The rotors are all lubed up with Crisco
This iron has the o-rings installed and layered with crisco
umm yeah there I am .... with the shaft!!!
1 plate at a time
Getting closer
Together
#165
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
assembled
I forgot to mention.. with my fingers in the plug holes and turning the engine over it had GREAT compression
I did more today I will get pics of it later..
I forgot to mention.. with my fingers in the plug holes and turning the engine over it had GREAT compression
I did more today I will get pics of it later..
#170
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
no, I should have instead I used a little sander on my dremel... to bad so sad I took some aluminum with it and the front housing the "m" is blended.
****** high speed dremel!
****** high speed dremel!
#173
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
hot wax machine no.. what are u refering too...
I have a coffee pot with oil in it.. a frying pan with oil in it and the white item with a blue dome is the game 20 questions...
I have a coffee pot with oil in it.. a frying pan with oil in it and the white item with a blue dome is the game 20 questions...