Spooled Up Racing's Turbo Swap Thread
#259
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
Well here is what I have got accomplished today
I have the holes cut so the pipes are going into the engine bay I just need to get things snugged up and clamped down and a couple pipes cut and it will be on...
first I need a higgi/greddy elbow another thing I forgot last minute
taken with cell phone sorry for the big pic
I have the holes cut so the pipes are going into the engine bay I just need to get things snugged up and clamped down and a couple pipes cut and it will be on...
first I need a higgi/greddy elbow another thing I forgot last minute
taken with cell phone sorry for the big pic
#261
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
it came with a couple brackets that I bent into place well rx7tuner bent into place, and we bolted it up today and put the pipes in..
#262
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
ok here are some I got from late tonight... I got the holes cut, the pipes run into the engine bay now I just need a couple couplers, and the higgi/greddy elbow
Yes the car is on an angle..
OK what do u think?
Yes the car is on an angle..
OK what do u think?
#266
Rotary Enthusiast
Join Date: Feb 2008
Location: tennessee
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
and your question about the harness. its all plug and play unless u want to run emmisons and cruse controle. and u have to change 1 wire to get the actuator on the twin scroll to open if u are using the stock s4 turbo. but most people just leave it alone and dont worry about it because it only makes u spool alittle slower but nothing noticable really
#267
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
no emissions, no twin scroll, no cruse
the one thing I did notice is the T2 tps looks like a 3 wire where the n/a tps I think was a 2 wire.. I cant find a 3 wire connector on my harness
the one thing I did notice is the T2 tps looks like a 3 wire where the n/a tps I think was a 2 wire.. I cant find a 3 wire connector on my harness
#269
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
nope the coolant res has always been on the drivers fender.. I think its an 86' thing.. because everyone asks me that..
I have to find that 3 wire connector on my harness then because I cant find it lol
EDIT
Ok I looked at my old tps I sold and it was a 3 prong also... now I have to find that 3 prong connector on my harness hummm
I have to find that 3 wire connector on my harness then because I cant find it lol
EDIT
Ok I looked at my old tps I sold and it was a 3 prong also... now I have to find that 3 prong connector on my harness hummm
#271
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
no because the res sites between the radiator supper and bumper support.. this sits outside of it all...
I will look for that connector today!
I will look for that connector today!
#274
Banned. I got OWNED!!!
Thread Starter
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
Ok no pictures today (atleast not now)
I have done the following
turbo ECU installed
Walbro installed
TPS wires lengthened
I need 2 couplers
1 banjo bolt
and the higgi/greddy elbow and I can get the car ready to start
I have done the following
turbo ECU installed
Walbro installed
TPS wires lengthened
I need 2 couplers
1 banjo bolt
and the higgi/greddy elbow and I can get the car ready to start
#275
Hey i just spent a few hours reading through your build up and it looks good. I'm just south of Flint, MI. I'm not sure where Comstock is. But, I just about where you are. I'm working on getting mine started.
I like that FMIC tho.
I like that FMIC tho.