s5 t2 tranny into a s4 n/a
#2
I am putting a s5 TII tranny in my s4 n/a too! Well... it will be connected to a s5 TII block. :p
So far, the only things I know of that need to be changed are the driveshaft and slave cylinder.
So far, the only things I know of that need to be changed are the driveshaft and slave cylinder.
#3
Rotary Enthusiast
Thread Starter
Join Date: Jun 2004
Location: trenton,il
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by speed_monkey
I am putting a s5 TII tranny in my s4 n/a too! Well... it will be connected to a s5 TII block. :p
So far, the only things I know of that need to be changed are the driveshaft and slave cylinder.
So far, the only things I know of that need to be changed are the driveshaft and slave cylinder.
#4
Rotary Enthusiast
Thread Starter
Join Date: Jun 2004
Location: trenton,il
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by speed_monkey
I am putting a s5 TII tranny in my s4 n/a too! Well... it will be connected to a s5 TII block. :p
So far, the only things I know of that need to be changed are the driveshaft and slave cylinder.
So far, the only things I know of that need to be changed are the driveshaft and slave cylinder.
#7
Rotary Enthusiast
Thread Starter
Join Date: Jun 2004
Location: trenton,il
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by classicauto
TII flywheel (from same series as the engine)
Clutch
Crossmember (IIRC)
Driveshaft (custom, or the Racing beat TII trans-->N/A diff driveshaft)
Slave cylinder
Speedo cable (if you want it be accurate, and Im not even sure if the N/A one will actually fit)
Clutch
Crossmember (IIRC)
Driveshaft (custom, or the Racing beat TII trans-->N/A diff driveshaft)
Slave cylinder
Speedo cable (if you want it be accurate, and Im not even sure if the N/A one will actually fit)
Trending Topics
#9
Rotary Enthusiast
Thread Starter
Join Date: Jun 2004
Location: trenton,il
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by papiogxl
nope
#11
Rotary Enthusiast
Thread Starter
Join Date: Jun 2004
Location: trenton,il
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by papiogxl
You will need a turbo starter, I don't believe it matters whether it is S4 or S5, but the starter is in a different position on a Turbo than a NA
#13
Rotary Enthusiast
Thread Starter
Join Date: Jun 2004
Location: trenton,il
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by classicauto
#15
Full Member
iTrader: (3)
Join Date: Oct 2004
Location: mo
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by deetz
so according to that il have to change the half shafts and **** too?? why is that?
#17
Full Member
iTrader: (3)
Join Date: Oct 2004
Location: mo
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
have to use turbo half shafts http://www.mazdatrix.com/g5.htm
86-92 Turbo into non-turbo 3rd Member assembly Must re-drill and machine pinion flange for non-turbo driveshaft bolt pattern, and use Turbo halfshafts
86-92 Turbo into non-turbo 3rd Member assembly Must re-drill and machine pinion flange for non-turbo driveshaft bolt pattern, and use Turbo halfshafts
#19
Full Member
Join Date: Jul 2006
Location: Los Angeles
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
The wiring is different, I'm doing this right now and the wiring is giving me probs. Putting a s5 t2 trans in my s4 vert. Thought I did the wiring right but my gauge cluster and reverse lights dont work right now.
Link to my thread on the wiring, some good info there.
https://www.rx7club.com/showthread.p...=1#post6250587
Link to my thread on the wiring, some good info there.
https://www.rx7club.com/showthread.p...=1#post6250587