hey guys,
I cant get the sway off at the ends of it (tierod ends?) I can loosen the nuts but they keep spinning there. This part of it is not similar to the S4 model i have.. Is there someway to getting it off the ends or should the nut just come off? thanks guys!

Tyler

 

sorry that didnt make much sense.. how do i remove the Sway Bar End Links from the stock S5 swaybar!? anyone? there seems to be a bolt on one side and nothing on the other so the whole bolt and whatever is inside that just keeps spinning.. prompt would be nice.. i need to move the car outta the garage asap!

 

I took off my sway bar today. I undid the other bolt/nut on the link and took out the bar with the links attached to it. The bolt/nut that attaches to the control arm. I am not sure what you are trying to do, I only had to change the bushings on the bar, so that worked for me.

 

yeah i understand how to remove the whole bar.. I have the bar sitting on my floor.. I need to get the endlinks off of it so i can install my RB sway bar.. how do you get these things off?

 

You can try to dremel the bolt/nut off, if you don't mind getting a new one. I am swapping out the end links too so I am just tossing the whole assembly, but I've had to do that on a few other parts of this car.

 

I thought there was an allen wrench fitting inside the bolt? I did mine a while back and had the same problem until I realized that.

 

hmm i never saw that.. an alen key bolt and then the nut on the bolt to screw off? anyone sel have trouble putting a RB front sway bar on there S5?

 

that would be easy if it was a S4 type Sway Bar End Link but because its an S5 it has a ball in the end which lets the end link pivit.. but you cant get to this ball and theres no way to pull it out of the end link.. so i guess this bolt somehow needs to some off the end..