S4 turbo ecu pinout please....
Thread Starter
Full Member
iTrader: (1)
Joined: Jul 2011
Posts: 106
Likes: 0
From: IDAHO FALLS, IDAHO
S4 turbo ecu pinout please....
I have searched! the only link was to FC3Spro and it is down...
I just need to see if the ecu is getting correct TPS voltage because the anitflood with Rtek 1.8 is not working!!
THANKS
I just need to see if the ecu is getting correct TPS voltage because the anitflood with Rtek 1.8 is not working!!
THANKS
2 seconds of a google search... http://www.wright-here.net/cars/rx7/88_manual.htm
Thread Starter
Full Member
iTrader: (1)
Joined: Jul 2011
Posts: 106
Likes: 0
From: IDAHO FALLS, IDAHO
2 seconds of a google search... http://www.wright-here.net/cars/rx7/88_manual.htm
Why are Rx7, and DSM owners such asses?!!!
Last edited by bigolsen; Apr 17, 2012 at 03:21 PM.
Rotary Freak
Joined: Jul 2008
Posts: 1,660
Likes: 2
From: FORT WORTH TEXAS
Why are YOU such a DUMB ***?
The first link you were given had both the wiring diagrams in it and also the pinouts for the ECU with values for each pin.
I'm well past the stage of being pissed off by people who have reading comprehension problems calling others what THEY are in spades.
I'd suggest if a moderator kicks me off this forum for writing this, then he should have kicked the original poster off the moment he wrote his "***" post.
The first link you were given had both the wiring diagrams in it and also the pinouts for the ECU with values for each pin.
I'm well past the stage of being pissed off by people who have reading comprehension problems calling others what THEY are in spades.
I'd suggest if a moderator kicks me off this forum for writing this, then he should have kicked the original poster off the moment he wrote his "***" post.
Trending Topics
Thread Starter
Full Member
iTrader: (1)
Joined: Jul 2011
Posts: 106
Likes: 0
From: IDAHO FALLS, IDAHO
Why are YOU such a DUMB ***?
The first link you were given had both the wiring diagrams in it and also the pinouts for the ECU with values for each pin.
I'm well past the stage of being pissed off by people who have reading comprehension problems calling others what THEY are in spades.
I'd suggest if a moderator kicks me off this forum for writing this, then he should have kicked the original poster off the moment he wrote his "***" post.
The first link you were given had both the wiring diagrams in it and also the pinouts for the ECU with values for each pin.
I'm well past the stage of being pissed off by people who have reading comprehension problems calling others what THEY are in spades.
I'd suggest if a moderator kicks me off this forum for writing this, then he should have kicked the original poster off the moment he wrote his "***" post.
This. Hailers is one of the most helpful people on this forum. If you're not willing to try and find **** yourself don't get pissy when other people won't hold your hand and do it for you. Lazy douche.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Way to go,Sport!..You won't get far if you don't respect the people trying to help you.
Cool out..have fun..it's a Freakin' Car.
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
A wild Mod appears!
Dude.
If you're going to start working on and troubleshooting RX-7s, you're going to want to read through the Factory Service Manual.
Not only will it have a pinout of the ECU connector, but there will also be the routing of the wiring harness as well as any connectors between the TPS and the ECU.
You'll note that the wiring harness goes right by the exhaust manifold and that may result in crispy wires that will cause poor TPS reading.
The diagram you needed was DIRECTLY copied out of the Factory Service Manual.
The next time you ask for a diagram, don't insult the people that provided it to you.
Dude.
If you're going to start working on and troubleshooting RX-7s, you're going to want to read through the Factory Service Manual.
Not only will it have a pinout of the ECU connector, but there will also be the routing of the wiring harness as well as any connectors between the TPS and the ECU.
You'll note that the wiring harness goes right by the exhaust manifold and that may result in crispy wires that will cause poor TPS reading.
The diagram you needed was DIRECTLY copied out of the Factory Service Manual.
The next time you ask for a diagram, don't insult the people that provided it to you.
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
Thread
Thread Starter
Forum
Replies
Last Post
