--??queation??--
#1
7s bein a pain in the ass
Thread Starter
Join Date: Nov 2003
Location: Chico, CA
Posts: 704
Likes: 0
Received 0 Likes
on
0 Posts
--??queation??--
i've gotten a s5 from an old man.. which the tranny was out but i got that replace already.. i was just out side starting it a few hours ago, and the coolant buzzer light came on.. i checked the car everything was good.. but the engine oil was all gone... plus a week before i just had the oil changed... what do you guy think.. plus it does smoke alot.. also. im thinking there must be a leak, blown gasket.. or seals out. and oil must be getting into the engine.. my guess.. but what do you guys think.?
aka_rocket..
aka_rocket..
#2
truespin, not tirespin
Join Date: Nov 2003
Location: Belpre, Ohio
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
First....
Rotary engines have oil injected into the "combustion chambers" in order to keep the apex seals soft enough to seal against the housing. Some people even run 2-cycle premix.
Alright. Now that that's cleared up. What model S5 and how many miles?
Rotary engines have oil injected into the "combustion chambers" in order to keep the apex seals soft enough to seal against the housing. Some people even run 2-cycle premix.
Alright. Now that that's cleared up. What model S5 and how many miles?
#3
7s bein a pain in the ass
Thread Starter
Join Date: Nov 2003
Location: Chico, CA
Posts: 704
Likes: 0
Received 0 Likes
on
0 Posts
its a 1990 GTu... milage is high.. it has just about.. 199,xxx (its really 198,9xxx though) i've just got it. so im thinking a rebuilt. but i wanna see what you guys think.. but when i first got it.. it ran good. no problem no nothing.. even when i got it, the car was still smoking. but no loss in engine oil??.. maybe the seal is just out OUT now.. but yea.. thanks truespin88.. any of your knowledge is much appericated...
aka_rocket
aka_rocket
#6
you said you "had the oil changed"? As in went to someplace like Jiffy Lube? If so & as others have said, check the drain plug. My wife took her Durango to local Jiffy Lube & they missed replacing the drain bolt, and two skid plate bolts. She got it home & had just enough oil left in it to drip a little on the garage floor. New drain plug & bolts by me & no more insta-change places will see our business. I've heard too many bad stories about these places.
#7
Senior Member
Join Date: Dec 2003
Location: Shelburne,Ontario
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Hey Steve...
when I was working at a heating and a/c company over the summer,I had to take in some company vans and the owner's wife's car for oil changes at a lube place and they let you stay in the shop and watch them as they work. They did surprisingly good work at that particular shop. Pricey though,i'd rather have done the work myself,but I wasn't the one payng for it,so who cares?
when I was working at a heating and a/c company over the summer,I had to take in some company vans and the owner's wife's car for oil changes at a lube place and they let you stay in the shop and watch them as they work. They did surprisingly good work at that particular shop. Pricey though,i'd rather have done the work myself,but I wasn't the one payng for it,so who cares?
Trending Topics
#8
7s bein a pain in the ass
Thread Starter
Join Date: Nov 2003
Location: Chico, CA
Posts: 704
Likes: 0
Received 0 Likes
on
0 Posts
yea. i thought i left the drain plug offand have forgotten to put it back on.. but there was no oil leak, also no oil seen on the ground..?? but just very smokey, milage is high too.. so thats another thing.. but where did all the oil go. thats why im curious about it..??
aka_rocket
aka_rocket
#9
truespin, not tirespin
Join Date: Nov 2003
Location: Belpre, Ohio
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
uhm, im pretty sure that in the FSM/Haynes there is a procedure for checking the Metering Oil Pump/Oil Metering Pump... check it, then check the lines, and injectors. Start with the easiest, cheapest proper fixes before you delve into the difficult and expensive fixes.
Thread
Thread Starter
Forum
Replies
Last Post
Slideways Driver
2nd Generation Specific (1986-1992)
14
12-13-12 11:19 PM