need help quick quick quick!!
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
need help quick quick quick!!
i turn my key in the ignition and it won't move, i get it past the locking position and after its on "acc" it won't turn anymore...and it just won't move, i really need to go somewhere...i tried forcing it and i only bent my spare key...what should i do?!?!?!
#4
Refined Valley Dude
Join Date: Oct 2001
Location: Kitchener, Ontario (Hamilton's armpit)
Posts: 2,283
Likes: 0
Received 2 Likes
on
2 Posts
It does sound like it's locked.
The wheel will only turn through a very short range. An inch, maybe two. Find the middle of this free play, and hold the wheel there. Now turn the key.
The wheel will only turn through a very short range. An inch, maybe two. Find the middle of this free play, and hold the wheel there. Now turn the key.
#6
zoom zoom go boom
Not extremely hard. At least I dont think it is for our cars. But that really does sound like what your problem is. (Steering wheels lock) If I were you I'd just sit there and jerk the **** out of the steering wheel and try to normally engage the key. dont try to force the key. If all else fails then yea. Change the ignition lock cylinder.
#7
Senior Member
Thread Starter
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
well thats not rreally the thing...i already did that and i broke it, like the carbon or whatever that crap in the ignition cylinder is made of it cracked and part of it fell out so i can't even get it to "acc" now so im screwed, but i still need to get somewhere, anyone know how to hotwire our cars? i can't push start it, my driveway is on a backwards hill, thanks....gerry
Trending Topics
#10
Senior Member
Thread Starter
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
thats how i broke it, this has happened before and it got stuck...so i used a screwdriver and it worked, this time it just broke, but if anyone knows how to hotwire our cars i would want to know...i have been looking online and the results so far have been pretty obismal
#11
Senior Member
Thread Starter
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
ok so, in that link, is that the way to get it out and if i did get it ut bould i start it without that, cuz i still need to get a new one...and i doubt that wil happen today...
#13
Senior Member
Thread Starter
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
oh, yea i see, ok then the next step is, i get my license back in 4 days i need to get this fixed...this car has broken on me about 12 times so far and i am soooo sick of it, i need to get an ignition cylinder like now...so i can have it for next tuesday...any suggestions?
#15
Senior Member
Thread Starter
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
no salvage yard around here has one, i called like 12 and if they did i doubt it would come with a key...i called a dealer and they said they could get one for me, but i think it will be like a HELL of a lot of money, im cringing thinking about it
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
Adaptronic MTX-L to adaptronic question
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
09-30-15 08:13 PM