FC reverse vented hood
#26
NorCal 7's Co-founder
Thread Starter
Stan, shoot me an email address for you via PM and I'll send you pictures of the pods. If you want to see people standing on them show up to the May meet in Sac and you can stand on my pod. I've had up to a 250 pound person put all of their weight on it. And that's a fairly thin fiberglass part.
Zach
Zach
#27
I R SAD PANDA W/O BAW
Originally Posted by BoostedRex
Stan, shoot me an email address for you via PM and I'll send you pictures of the pods. If you want to see people standing on them show up to the May meet in Sac and you can stand on my pod. I've had up to a 250 pound person put all of their weight on it. And that's a fairly thin fiberglass part.
Zach
Zach
#28
D1 Drifter Status
Join Date: Dec 2004
Location: Sacramento CA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
yeah, the guage pods are crazy strong... for example, lets say the world blew up into infinite pieces, the guage pods would still be 100% intact, and unscathed.
When you stand on them, it dosnt even look like they bend or flex AT ALL, and its only supported by a few edges. I would so trust a hood from 5one5.
Zach, if you guys want somebody to...show off the hood...id be more than happy to drive around with it on my car indefinitly
When you stand on them, it dosnt even look like they bend or flex AT ALL, and its only supported by a few edges. I would so trust a hood from 5one5.
Zach, if you guys want somebody to...show off the hood...id be more than happy to drive around with it on my car indefinitly
#30
D1 Drifter Status
Join Date: Dec 2004
Location: Sacramento CA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
ok, ok, how about this? your FC's red right? wouldnt you wanna... test each color? lol. You can have the red one, i can have the black one, and we can give rob the white one. its a good idea....all the cool kids are doing it!
im jk, are you gunna have that hood on your car by the next meet?
im jk, are you gunna have that hood on your car by the next meet?
#31
NorCal 7's Co-founder
Thread Starter
It's doubtful. But I will have it before Rotorfest in June. I'll have the sunroof, camber plates, and gauge pods.
1. Juiceh
2. Like2eatricers
3. Smogsux
4. Tokyo-RX7
5. Turbo23
6.
7.
8.
9.
Zach
1. Juiceh
2. Like2eatricers
3. Smogsux
4. Tokyo-RX7
5. Turbo23
6.
7.
8.
9.
Zach
#36
NorCal 7's Co-founder
Thread Starter
Camman, PM'd you about the gauge pods. And to anyone else who doesn't already know, if you have questions about any of 5one5's products then PM me and I'll sort you out.
Zach
Zach
#37
Round&Round not Up&Down
Join Date: Aug 2001
Location: West Bloomfield, MI
Posts: 2,805
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SmogSUX
This hood or any other reverse vent would suck with a tmic wouldn't it? I mean it wouldn't get any air.
Originally Posted by Turbo23
correct, the hood would be for NA cars or turbo cars running a fmic setup or vmount. If I can make rotorfest this year, I will definatly want to see this hood.
#40
NorCal 7's Co-founder
Thread Starter
Rotorfest will be in the San Fran area either the 2nd or 3rd weekend in June. I'll have 5 new products available there as well. And some of these none of you have heard about before.
And I should have some more details about the hood before the day is out. No pictures as of yet, but some good details.
Zach
And I should have some more details about the hood before the day is out. No pictures as of yet, but some good details.
Zach
#43
NorCal 7's Co-founder
Thread Starter
Actually it will Ben. I will talk to you about it at the shop this weekend. This hood should be able to clear the TB problems with LS1 swaps, the fitment problems with 20B swaps and even your setup.
Zach
Zach
#45
hey Zach, i noticed you through my name on the list. Cool. im really looking forward to the release of this hood. So you will make one in carbon fiber with a latch for me? If it is possible shoot me a price and an ETA on it so i will have the money ready for you. Thanks bud
#47
5one5innovations.com
Join Date: Feb 2004
Location: Toronto Ont.
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Hey man
Yes you can run the hood on an N/A as long as you have an electric fan (stock fan doesnt fit)
I have been running the hood pictured in the first post for quite a while on my N/A it has dropped my radiator temps quite alot and over all the under hood temp has lowered as well.
Here are two more pics of the hood in the first post. THIS IS NOT THE ACTUAL HOOD TO BE MOLDED!! The hood for molding has a slightly less steep and agressive vent. However the actual opening is very close to the same size. The hood I'm working on right now also has a small vent behind the turbo. Pics of that hood will hopefully be up mid to end of next week. Please excuse the battle damage on the front corner of the car.
Thanks for all the great comments about my gauge pods guys. I really hope you like all of the other parts 5one5 is currenty working on for the fc. I'm hoping to have upwards of 10 fc parts in the next 3 months or so.
website coming soon
I would also like to thank Zach for all his efforts in helping to put 5one5 on the map.
Thanks Mael
5one5Innovations
Yes you can run the hood on an N/A as long as you have an electric fan (stock fan doesnt fit)
I have been running the hood pictured in the first post for quite a while on my N/A it has dropped my radiator temps quite alot and over all the under hood temp has lowered as well.
Here are two more pics of the hood in the first post. THIS IS NOT THE ACTUAL HOOD TO BE MOLDED!! The hood for molding has a slightly less steep and agressive vent. However the actual opening is very close to the same size. The hood I'm working on right now also has a small vent behind the turbo. Pics of that hood will hopefully be up mid to end of next week. Please excuse the battle damage on the front corner of the car.
Thanks for all the great comments about my gauge pods guys. I really hope you like all of the other parts 5one5 is currenty working on for the fc. I'm hoping to have upwards of 10 fc parts in the next 3 months or so.
website coming soon
I would also like to thank Zach for all his efforts in helping to put 5one5 on the map.
Thanks Mael
5one5Innovations
Last edited by BoostedRex; 04-29-06 at 11:23 AM.
#49
Round&Round not Up&Down
Join Date: Aug 2001
Location: West Bloomfield, MI
Posts: 2,805
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BoostedRex
Jimmy, I'll have Mael take a look at see if the hood will clear a TMIC. I should have an answer for you soon.
Zach
Zach
FWIW, the vent above the TB is not needed. I think the hood would look better if it wasn't symmetric, like the stock hood...ya know, the scoop being off center makes it look cool as hell. Maybe two screen vents on the turbo side of the center vent would be cool too. I dunno, I'm just throwing ideas out for you guys to consider.