i'm ready to buy from e-bay an ic (32x12x3)i don't have bigger turbo,i run the stock and i wonder if i'm gonna have turbo-lag.i just need to relocate the ic.maybe i must search for something smaller?

 

do more research before you just go and buy some off the wall intercooler. do a search using the "search" function at the top of the page to see what others are using on their rx7's.

 

look You're looking at this:


and it will end up like this: from CRACKHEADMEL's thread



this is what I bought: 27x5.5x2.5




and this is what it looks like on a stock bumper:


and this is my other bumper:


Painted intercooler and bumper:







after posting those pics I think YOU can tell that the intercooler you are looking at is WAY too big............look at all the IC you lose behind the bumper?? kinda pointless unless you cut your bumper.....

 

looks very nice.i don't care about the bumber at all.i just wonder what's the biger intercooler i can use with the stock turbo.i just don't want to have turbo lag.....

 

You will, its a function of how much air that stocker can move (not much).

 

u shouldnt have very much lag on stock turbo

 

I disagree.. The lag will be there. Might not be critical, but it will be noticeable.

 

i'm thinking about 27x5,5x2,5 now...

 

nobody had fmic with the stock turbo?

 

mine was on stock turbo......then the FMIC was stolen and I'm working on doing another FMIC setup......all on stock turbo.

 

Having a larger intercooler than the opening in the bumper is pointless. There might be a slightly smaller pressure drop across it, but there'll be more lag, and it's not going to cool the air as much as a smaller one completely in the airflow. This is a mistake I see happening all the time, most people don't think of it that way, they think bigger = better and forget that there needs to be air flow across it.

Also when going FMIC you need to make sure you have excess cooling capacity. The FMIC partially blocks the air to the rad, and it heats that air up, so the rad has less airflow, and the air it does see is hotter, so the rad doesn't work as well and you're much more likely to overheat.

 

you can cut the bumper like this but like Black posted above, it's not necesssarily better.......

 

i would make a bumper with a HUGE opening if I were to run this IC...........but then again I consider that FMIC a race application FMIC and aesthetics as not important in that case......let me find a pic of the race application.

 

HA!!!!!!!!! found it:.....748 HP car.............I can see where a HUGE intercooler is beneficial when running a HUGE turbo...........but I doubt anyone is going to be hitting anything close to that number

 

...so with 27x5,5x2,5 you haven't lag.right?

 

I wish I could tell you...............my IC and pipes were stolen Before I finished the install so i never even got to drive it..........As soon as I have it running I'll be posting my thoughts on it and vids of whatever I feel like taking vids of.........I honestly don't know about the lag on my IC setup yet.

 

this is off topic, but does anyone happen to know what lip that is in the pic that madrx7racer posted? i really like the look of that, it still looks stock, which is what I want. thanks

 

www.corksport.com Border Type II.........i have more pics but photobucket isn't working for me.

 

thanks, but is it discontinued? I can't find it on the site, and this would be going on an 87, so none of the lips on their site would fit without modification.

 

http://corksport.com/store/category/...-exterior.html

 

CORK SPORT 'Type CS' Rear Skirt ('86-'88)
CORK SPORT "Odura" Front Lip Spoiler
CORK SPORT 'Type II' Complete Kit
CORK SPORT 'Type II' Front Bumper
CORK SPORT 'Type II' Rear Bumper Caps ('89-'92)
CORK SPORT 'Type II' Side Skirts
CORK SPORT 'Type MS' Front Lip Spoiler (89-91)
CORK SPORT 'Type RE' Rear Wing
RE AMEMIYA Diffuser Pro
RE AMEMIYA FC2000 Front Bumper
RE AMEMIYA FC2000 Side Skirts
RE AMEMIYA GTII Spoiler

Haha, thats everything on the page. unless your talking about the "type II",but i don't see a border type II anywhere.

 

ugh..........it's the corsksport copy of the border type II.........it's under Type II..................If you don't want to get a whole bumper then I recommend the MazdaSpeed Front lip copy.......

 

i'm thinking for something even smaller now....9''x20''x2,5''...