1000ccm primarys, 1600ccm secondarys, Apexi PFC...
#3
600+rwhp club member
I use 1000cc primaries and 1600cc secondaries with my Power FC. It works fine. Just get someone that can tune well on the Power FC and you'll be fine. Good luck.
Dee E.
#5
thx 4 the answers!
i'm running a Turbonetics T60-1...
i know its overkill, but i have some 1000ccm injectors laying around... and 1000ccm secondary + stopck 550ccm primary would not be enough fuel for this setup...
so i kick out the 550's and buy some 1600ccm...
i'm running a Turbonetics T60-1...
i know its overkill, but i have some 1000ccm injectors laying around... and 1000ccm secondary + stopck 550ccm primary would not be enough fuel for this setup...
so i kick out the 550's and buy some 1600ccm...
Trending Topics
#8
I have 880's in the primaries and 1700's in the secondaries.
I have no issues at all running with a wolf 3d at idle. You should be fine with the 1000's as long as you get your car tuned decently :P
I have no issues at all running with a wolf 3d at idle. You should be fine with the 1000's as long as you get your car tuned decently :P
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
Blk 93
3rd Generation Specific (1993-2002)
7
09-28-15 01:45 PM