T56 to automatic fd bell housing
09-07-12, 10:34 AM
#177
t56 single clutch
i had a custom made rx7 clutch with the t56 input shaft hub on the middle so it can be used with a rx7 flywheel and also a rx7 pressure plate for 400-500 hp. i only used it to do a mockup brand new never used. i paid 200 to have it made anybody interested let me know.
09-15-12, 08:48 AM
#178
t56 magnum convesion
I am selling one of the SFI prototype bellhousing that i have for the T56 Magnum it bolts on to the magnum and to the automatic rotary back plate. I paid alot of money to have it build. I was sell it for $550 might need minor customization depending on application.
09-15-12, 10:31 AM
#179
Junior Member
Join Date: Feb 2011
Location: Canberra, Australia
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I am selling one of the SFI prototype bellhousing that i have for the T56 Magnum it bolts on to the magnum and to the automatic rotary back plate. I paid alot of money to have it build. I was sell it for $550 might need minor customization depending on application.
What sort of customization might be needed, for what application?
What is needed to make it work, other than the bellhousing and T56 Magnum?
Any photos of the one you are selling, or build photos of it being used successfully?
Is it good?
09-15-12, 12:59 PM
#180
PM me and i will give you all details. it was made for a FS3s but it
yes it good.
I might be interested, can you ship it to Australia, cheaply?
1. i can ship it to australia but you will need to pay for shipping.
What sort of customization might be needed, for what application?
2. very minimum if its for a FD3s, but it can be used for any application.
What is needed to make it work, other than the bellhousing and T56 Magnum?
3. the bellhousing fit directly to a 13b automatic back plate or 20b and to the T56 magnum. the second part of your question it depends on your application, maybe driveshaft, trans mount ect. but to fit a T56 magnum to a 13b auto or 20b the bellhousing is all you will need.
Any photos of the one you are selling, or build photos of it being used successfully?
yes PM me and i will send you some.
Is it good?
1. i can ship it to australia but you will need to pay for shipping.
What sort of customization might be needed, for what application?
2. very minimum if its for a FD3s, but it can be used for any application.
What is needed to make it work, other than the bellhousing and T56 Magnum?
3. the bellhousing fit directly to a 13b automatic back plate or 20b and to the T56 magnum. the second part of your question it depends on your application, maybe driveshaft, trans mount ect. but to fit a T56 magnum to a 13b auto or 20b the bellhousing is all you will need.
Any photos of the one you are selling, or build photos of it being used successfully?
yes PM me and i will send you some.
Is it good?
10-07-12, 04:17 PM
#183
I am wanting to buy a good compression used 20B and bolt on a T56 just to get the car running. I will have the block built later on. I just wanted to know if I would be able to use the block without having to tear it down just to replace the 20B rear iron with a 13B auto rear iron?
Thanks
Thanks
02-27-13, 10:21 AM
#188
Still working on it
im still working on the project, i moved so i had to put the project a side for a little while but i should be getting back to it very soon. If anybody is interested i have one of the prototype bellhousing that requires a smaller flywheel that i might sell. In the beggining i was going to have a custom made smaller flywheel for reduce weight but just went with the stock lighten flywheel and im not going to use that one. anybody that is interested feel free to pm me. It is a bolt on to a t56 magnum and a auto engine back plate. Its SFI certified very quality stuff.
03-01-13, 03:27 AM
#189
Junior Member
Join Date: Mar 2010
Location: Western Australia
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Guys here is all the info you may need in regards to this conversion. Check out my build thread on page 7 half way down. I completed it a year ago and it works a treat.
1bigfella"s track build - Page 7
Here it is in action, with approx 400rwkw...
1bigfella"s track build - Page 7
Here it is in action, with approx 400rwkw...
Thread
Thread Starter
Forum
Replies
Last Post
jakeishness
2nd Generation Specific (1986-1992)
11
09-11-15 11:33 AM
aluminum, belhousing, bellhousing, coleman, fabricated, getrag, howard, magnum, mt82, plate, quantum, rx7, strong, t56, treme
