T56 to automatic fd bell housing
#154
Racing Rotary Since 1983
iTrader: (6)
this is just an FYI... i haven't been closely following the thread and there may be lots of ways to do the swap other than my choice which is auto bellhousing etc...
anyway, the reason for the post is that i am doing a run of adapter plates... that'd be T56 to mazda auto BH. i do not/will not bother my machine shop for one BH so if anyone is interested in having one made in this batch which will be avail in 10 days PM me NOW.
$300 shipped to cont USA.
it may need to be slightly modded for a Magnum.
BTW, i love my T56 and am in the second year...
howard
anyway, the reason for the post is that i am doing a run of adapter plates... that'd be T56 to mazda auto BH. i do not/will not bother my machine shop for one BH so if anyone is interested in having one made in this batch which will be avail in 10 days PM me NOW.
$300 shipped to cont USA.
it may need to be slightly modded for a Magnum.
BTW, i love my T56 and am in the second year...
howard
#155
Senior Member
Join Date: Aug 2004
Location: Burbank California
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
this is just an FYI... i haven't been closely following the thread and there may be lots of ways to do the swap other than my choice which is auto bellhousing etc...
anyway, the reason for the post is that i am doing a run of adapter plates... that'd be T56 to mazda auto BH. i do not/will not bother my machine shop for one BH so if anyone is interested in having one made in this batch which will be avail in 10 days PM me NOW.
$300 shipped to cont USA.
it may need to be slightly modded for a Magnum.
BTW, i love my T56 and am in the second year...
howard
anyway, the reason for the post is that i am doing a run of adapter plates... that'd be T56 to mazda auto BH. i do not/will not bother my machine shop for one BH so if anyone is interested in having one made in this batch which will be avail in 10 days PM me NOW.
$300 shipped to cont USA.
it may need to be slightly modded for a Magnum.
BTW, i love my T56 and am in the second year...
howard
Hi Howard,
What else would be necessary to complete the swap? Would you be able to piece together a complete kit, which includes everything necessary to do the swap (less the trans itself)? I would definitely be interested in something like that as I don't want to start taking the car apart and then realize I need something else to complete the swap. I think a lot of other members would interested as well.
Thanks,
Chris
#156
Racing Rotary Since 1983
iTrader: (6)
parts necessary to do the T56 swap w an auto bellhousing.
auto bellhousing
auto starter
auto rear iron
auto flex plate (needs to be machined to fit QuarterMaster flywheel button/simple deal)
ARP Toyota flywheel bolts
Quartermaster 8.5 inch "rally" twin disc clutch mine (2 rotor 600 rwhp, no drag racing) uses 2000 pounds clutch spring which is working perfectly to date. driveable too.
Quartermaster hydraulic clutch actuator and bleed line
rear transmission mount
rear subframe for diff (really slick) will give you the specifics later today as i have to run
a different (short) clutch master cyclinder
GTO shift mechanism
Lou's short shift stick
2 inch white Hurst shifter ball, you gotta have it.
i did a thread w pics and will post a link later.
i remember starting out w "this isn't cheap but..."
howard
auto bellhousing
auto starter
auto rear iron
auto flex plate (needs to be machined to fit QuarterMaster flywheel button/simple deal)
ARP Toyota flywheel bolts
Quartermaster 8.5 inch "rally" twin disc clutch mine (2 rotor 600 rwhp, no drag racing) uses 2000 pounds clutch spring which is working perfectly to date. driveable too.
Quartermaster hydraulic clutch actuator and bleed line
rear transmission mount
rear subframe for diff (really slick) will give you the specifics later today as i have to run
a different (short) clutch master cyclinder
GTO shift mechanism
Lou's short shift stick
2 inch white Hurst shifter ball, you gotta have it.
i did a thread w pics and will post a link later.
i remember starting out w "this isn't cheap but..."
howard
#157
Banned. I got OWNED!!!
iTrader: (256)
Hi Howard,
What else would be necessary to complete the swap? Would you be able to piece together a complete kit, which includes everything necessary to do the swap (less the trans itself)? I would definitely be interested in something like that as I don't want to start taking the car apart and then realize I need something else to complete the swap. I think a lot of other members would interested as well.
Thanks,
Chris
What else would be necessary to complete the swap? Would you be able to piece together a complete kit, which includes everything necessary to do the swap (less the trans itself)? I would definitely be interested in something like that as I don't want to start taking the car apart and then realize I need something else to complete the swap. I think a lot of other members would interested as well.
Thanks,
Chris
I have those parts, if you need them
#160
Junior Member
Join Date: Mar 2010
Location: Western Australia
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I have had 2 x Rm4091 sent from quicktime in the last month, and both are wrong. The auto starter does not engage onto the flywheel as listed and reccommended. Ended cutting up the bell and modifying the starter platform to fix the engagement issue. Also needed to cut the bell edges where the dowells sit. Would not do this again, has been a nightmare. Quicktime need to get their R and D right before re releasing it.
#161
Rotary Enthusiast
so ......is there a kit done ?
i am looking into this possibly for the future , i have a auto starter and a cosmo automatic bellhousing
what else would be needed ?
i am looking into this possibly for the future , i have a auto starter and a cosmo automatic bellhousing
what else would be needed ?
#162
Rotary Enthusiast
iTrader: (3)
Join Date: Nov 2001
Location: michigan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Blue Prints for all the custom parts needed for this set up will also be available for anyone to make on there own.. .. no more than 1 week or 2...
Thanks
#166
Junior Member
Join Date: Feb 2011
Location: Canberra, Australia
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Will it work with T56 Magnum and manual 13B-REW?
If not, are there any other kits, preferably, or parts, that will do this?
Also would like minimal sized bell housing/etc., to avoid tranny tunnel mods as much as possible.
#167
Junior Member
Join Date: Feb 2011
Location: Canberra, Australia
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Hello
After some measuring and working with the magnum trans.
My kit will not work with the magnum sorry..
Thank you
Chip U
After some measuring and working with the magnum trans.
My kit will not work with the magnum sorry..
Thank you
Chip U
Still searching for a proven manual plate 13B-REW to T56 Magnum solution.
I have put a support request in to QuickTime to ask if they are aware of the fitment problems with their RM-4091 bellhousing as mentioned above, and if they know how to solve it more easily.
Last edited by simoninaustralia; 08-09-12 at 12:55 PM.
#169
YOUR TRIANGLE NIGHTMARE
Thread Starter
iTrader: (6)
Join Date: Mar 2006
Location: automotive purgatory
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
in response to your question 20b silvia. here is what I haverso far. I should be finished soon. some areas of the bellhousing have to be cut into to allow for the protrusions
#173
YOUR TRIANGLE NIGHTMARE
Thread Starter
iTrader: (6)
Join Date: Mar 2006
Location: automotive purgatory
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
chipsmotorsports.com sell a custom flywheel for this setup that will take either a quartermaster or tilton 7.25 clutch. I'm going to use it along with a quartermaster clutch I had quartermaster make for me.
The shifter situation is still being worked on by another source at this point.
The shifter situation is still being worked on by another source at this point.
#174
Junior Member
Join Date: Feb 2011
Location: Canberra, Australia
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Is that going to fit up to an auto 13B rear plate, rather than manual, like it seems all of the off the shelf solutions seem to be?