20B Clutch options for FD
#1
Rotary Enthusiast
Thread Starter
20B Clutch options for FD
Okay.. i am running a 20B setup in an FD3 with FD transmission.. Looking to run max 1bar boost and gross around 600bhp. It will be a street car so I want to know what clutch I can run that will handle the power/torque and not be too hard going in traffic. I ran and ACT 6 puck single plate on my old 13B and managed with it.. but I wouldn't want to go with anything heavier under foot if possible?
Let me know your recommendations. Ideally ones that don't break the bank!
Thank you
Lee
Let me know your recommendations. Ideally ones that don't break the bank!
Thank you
Lee
#4
Rotary Enthusiast
Thread Starter
Anyone else got any clutch options that will do the job? I have come across all the main brands but I see there are some US made clutches that look okay but I am not sure if they are any good in practice?
Does anyone know if you can get replacement clutch plates for Exedy carbon clutches other than from Exedy?
Thank you
Lee
Does anyone know if you can get replacement clutch plates for Exedy carbon clutches other than from Exedy?
Thank you
Lee
#5
i had the exedy clutch but i upgraded to the ORC triple disk and its much better it handles power upto 800+hp. I decided to get a t56 transmission so wont need it anymore only used it for about 50 miles. amazing clutch if interested feel free to PM me.
Anyone else got any clutch options that will do the job? I have come across all the main brands but I see there are some US made clutches that look okay but I am not sure if they are any good in practice?
Does anyone know if you can get replacement clutch plates for Exedy carbon clutches other than from Exedy?
Thank you
Lee
Does anyone know if you can get replacement clutch plates for Exedy carbon clutches other than from Exedy?
Thank you
Lee
Thread
Thread Starter
Forum
Replies
Last Post
Mrmatt3465
Interior / Exterior / Audio
8
09-17-15 01:28 PM