Rear lower QP/fender patch panel SA vs FB
#1
Prescription-7
Thread Starter
Rear lower QP/fender patch panel SA vs FB
Just looking for comparison on the rear lower quarter panels for SA vs FB (between wheel and tail light). I'm in need of a patch panel as per my other thread about the rust on my SA. I know the trim is obviously different on the sides along with the tail lights but I found an option for a much more reasonably priced patch panel off an FB. I was wondering if I have a cut out below the trim and farther forward from the tail light, will it match up with the SA?
#5
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,832
Received 2,603 Likes
on
1,847 Posts
the trim is different, but they interchange, the not enough coffee thing that the SA trim sits in is the same as the FB.
it should be the same shape down at the bottom too, and if its not its close enough
it should be the same shape down at the bottom too, and if its not its close enough
#6
Prescription-7
Thread Starter
Last edited by d_eagz13; 05-12-20 at 02:56 PM.
#7
Prescription-7
Thread Starter
Great. Thanks for the input. This will save me 100 bucks on the panels vs shipping from Canada! I appreciate it! I'll be updating the thread I started about rear lower fender rust when I tackle this for those interested.
Thread
Thread Starter
Forum
Replies
Last Post
MaDaz S1
1st Generation Specific (1979-1985)
5
04-29-10 06:43 AM
vipergts_3
1st Generation Specific (1979-1985)
6
03-25-07 08:12 PM