"Mazda Screws Car Owners on Lugbolt Choice"
#1
Nikki-Modder Rex-Rodder
Thread Starter
Join Date: Feb 2001
Location: Trying to convince some clown not to put a Holley 600 on his 12a.
Posts: 2,890
Likes: 0
Received 14 Likes
on
6 Posts
"Mazda Screws Car Owners on Lugbolt Choice"
"ARRRRRGGG!"
Went to an autoparts place looking for studs to replace my lugbolts with. I need long studs for the wheels I have. They did have metric (I congradulated them, and welcomed them to the twentieth cetury ), but they had nothing over ten mm. I need 12mm by 1.5 TPM. So it came as no suprise that they might have to be ordered. I figured even if they had some, they probably would'nt have enough.
Their supplier does'nt have them!.
Ok, so back to the shop I go. Anyone familiar with the company "MSC" (Machinest Supply Company)? Well their catalogue is about five-six inches thick!
They have studs in all kinds of sizes. But the 12 mm ones go from 1.25 TPM straight to 1.75 TPM...NO 1.5!!! WTF?!
Soooo, I need to know where y'all got yer studs.
I want to use threaded studs as opposed to the splined "pull-tight" inserts. With them, you have to pull the axel, and then you forever ruin the threads on the axels.
Went to an autoparts place looking for studs to replace my lugbolts with. I need long studs for the wheels I have. They did have metric (I congradulated them, and welcomed them to the twentieth cetury ), but they had nothing over ten mm. I need 12mm by 1.5 TPM. So it came as no suprise that they might have to be ordered. I figured even if they had some, they probably would'nt have enough.
Their supplier does'nt have them!.
Ok, so back to the shop I go. Anyone familiar with the company "MSC" (Machinest Supply Company)? Well their catalogue is about five-six inches thick!
They have studs in all kinds of sizes. But the 12 mm ones go from 1.25 TPM straight to 1.75 TPM...NO 1.5!!! WTF?!
Soooo, I need to know where y'all got yer studs.
I want to use threaded studs as opposed to the splined "pull-tight" inserts. With them, you have to pull the axel, and then you forever ruin the threads on the axels.
#2
r71's daddy
Join Date: Feb 2001
Location: Atlanta, GA
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
I got mine at the local Pep Boys. They were the only ones to have it. It was about 1/2" longer and was originally for a GM. It was also one of the hardened studs, not one of those cheap silver looking studs. I just had to go searching through their stud bins. I've had no problems with them and have had them on the car for about 2 years.
#4
Nikki-Modder Rex-Rodder
Thread Starter
Join Date: Feb 2001
Location: Trying to convince some clown not to put a Holley 600 on his 12a.
Posts: 2,890
Likes: 0
Received 14 Likes
on
6 Posts
80 BUCKS?! Holy Bagueezus!
I was expecting more along 2 bucks each.
David, do you remember what GM car they were for?
Thanks.
I was expecting more along 2 bucks each.
David, do you remember what GM car they were for?
Thanks.
#5
Driven a turbo FB lately?
iTrader: (1)
Originally posted by Sterling
80 BUCKS?! Holy Bagueezus!
I was expecting more along 2 bucks each.
David, do you remember what GM car they were for?
Thanks.
80 BUCKS?! Holy Bagueezus!
I was expecting more along 2 bucks each.
David, do you remember what GM car they were for?
Thanks.
Thats 16X2=$32 studs
Thats 16X2=$32 nuts
_______
$64
Guess $80 isnt far off?
When in doubt on prices use the Mazda Rip Off Rule Of Thumb
Take what you think it costs and multiply by ten, if you want more HP triple again!
#6
Old [Sch|F]ool
I found that ALL lug bolts have the correct 12x1.5 thread.
The ones for my SA's wheels were far too long to use with my steel race wheels. I didn't have any studs, and the Mazdacomp studs don't work with SA wheels anyway. So I went to the auto parts store and asked for 8 lug bolts with thread X long, and 8 more with thread Y long. (Fronts having to be shorter than rears since the fronts don't have to go through a drum) The guy brings out a whole collection and I choose which ones I need. I think it cost a total of $20 or $30.
I think the fronts were originally for a Pontiac LeMans (the Daewoo wannabe), not sure about the rears - maybe some sort of Volvo?. They all are 19mm hex so they're definitely not from a VW (17mm hex).
The MazdaComp studs will work with the '81-up cross wheels, it looks like. Definitely not the SA's waffle wheels.
All that background info said.... go to a junkyard and hunt down an SA and steal its lug bolts.
The ones for my SA's wheels were far too long to use with my steel race wheels. I didn't have any studs, and the Mazdacomp studs don't work with SA wheels anyway. So I went to the auto parts store and asked for 8 lug bolts with thread X long, and 8 more with thread Y long. (Fronts having to be shorter than rears since the fronts don't have to go through a drum) The guy brings out a whole collection and I choose which ones I need. I think it cost a total of $20 or $30.
I think the fronts were originally for a Pontiac LeMans (the Daewoo wannabe), not sure about the rears - maybe some sort of Volvo?. They all are 19mm hex so they're definitely not from a VW (17mm hex).
The MazdaComp studs will work with the '81-up cross wheels, it looks like. Definitely not the SA's waffle wheels.
All that background info said.... go to a junkyard and hunt down an SA and steal its lug bolts.
Trending Topics
#8
Driven a turbo FB lately?
iTrader: (1)
Originally posted by peejay
I found that ALL lug bolts have the correct 12x1.5 thread.
The ones for my SA's wheels were far too long to use with my steel race wheels. I didn't have any studs, and the Mazdacomp studs don't work with SA wheels anyway. So I went to the auto parts store and asked for 8 lug bolts with thread X long, and 8 more with thread Y long. (Fronts having to be shorter than rears since the fronts don't have to go through a drum) The guy brings out a whole collection and I choose which ones I need. I think it cost a total of $20 or $30.
I think the fronts were originally for a Pontiac LeMans (the Daewoo wannabe), not sure about the rears - maybe some sort of Volvo?. They all are 19mm hex so they're definitely not from a VW (17mm hex).
The MazdaComp studs will work with the '81-up cross wheels, it looks like. Definitely not the SA's waffle wheels.
All that background info said.... go to a junkyard and hunt down an SA and steal its lug bolts.
I found that ALL lug bolts have the correct 12x1.5 thread.
The ones for my SA's wheels were far too long to use with my steel race wheels. I didn't have any studs, and the Mazdacomp studs don't work with SA wheels anyway. So I went to the auto parts store and asked for 8 lug bolts with thread X long, and 8 more with thread Y long. (Fronts having to be shorter than rears since the fronts don't have to go through a drum) The guy brings out a whole collection and I choose which ones I need. I think it cost a total of $20 or $30.
I think the fronts were originally for a Pontiac LeMans (the Daewoo wannabe), not sure about the rears - maybe some sort of Volvo?. They all are 19mm hex so they're definitely not from a VW (17mm hex).
The MazdaComp studs will work with the '81-up cross wheels, it looks like. Definitely not the SA's waffle wheels.
All that background info said.... go to a junkyard and hunt down an SA and steal its lug bolts.
#9
The AUTO DOCTOR
Join Date: Mar 2001
Location: South Side of ATL. Ga.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
**** when i got the studs put in on my 81 gsl they were 16$ including install and a locking nut with the key. just go to a large wheel shop they have all kinda studs
#10
Old [Sch|F]ool
I paid $40 for mine... a racer got them for me at Mazda Comp prices I never used 'em though, since they're not long enough for SA wheels, and now that I have the FB, I discovered that one can use steel wheels with the factory FB lug bolts no problem.
#11
Senior Member
Join Date: Aug 2001
Location: Bloomington, MN
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Make friends with your local Mazda dealer's parts guys. I got as many used ones as my pockets could carry for FREE. They had a whole bucket full of them to look through for condition too...
#12
Senior Member
Join Date: Apr 2001
Location: Arlington, TX, USA
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
you can get the lug studs that are a little longer than stock at
www.jdwheels.com
They ran me $2 a piece, and I still have 8 left
www.jdwheels.com
They ran me $2 a piece, and I still have 8 left
Thread
Thread Starter
Forum
Replies
Last Post
rkhanso
2nd Generation Specific (1986-1992)
1
08-13-15 11:40 AM
KAL797
Test Area 51
0
08-11-15 03:47 PM