All,

Some of you might know i make the headlight bushings, Wiper bushings and interior door pull cups for the 1st gen's.
Recently, i met with a member that was getting a door pull cup set and he mentioned that it was difficult to find good condition interior door lock *****.
I saw it as a feasible piece to provide to the community, but i want to get some feedback in interest for this piece before i spend significant amount of effort to provide one.
Please let me know if you would be interested in this part now or in the future.

Thanks.

 

Definitely interested,ones in my car are fine.
I’d like to add a set of door lock ***** to my hard/impossible to get parts stash
As more time goes by,less and less parts will be available.
I would also like to get a pair of lock **** surround trim that goes into top of door panel to put in my stash.

I appreciate you taking the time to reproduce quality replacement pieces that you have. I bought a set of your door cups and they were better made than the originals. I hope you’re getting enough support from members here to make it worth your while.
Thanks for your efforts.

 

Thank you for the feedback and support. The members here are always exceptional. Always happy to fund my project car by providing parts to the community. The door lock surrounds I already make and are available.
I'll wait for a few more responses. Even if it's a few members, always happy to be able to provide those hard to find parts.

Thanks.

 

I have no need now but would be interested in the future. Thanks for doing these for us.

 

Im interested in a pair of interior door lock surrounds.. I purchased some aluminum door panels from a company here in florida but didnt have the door lock surround..

 

I do make the door lock surrounds. Please look them up on ebay, my account is the same as here. Sorry, no link is allowed. Thanks

 

If someone is willing to remove the lock **** and take some pictures along with some measurements, that would be greatly appreciated.
That way i can start making some test pieces and get some feedback from the community.
Thanks.

 

Checking back in if anyone has a chance to take some measurements of the door lock ****.
I will send you a free set once complete.
Thank you.

 

Hey Kutukutu1, if you can give me two weeks i will gladly do it for you. I will have access to my 5 letter in a couple of weeks here. Can you show me specifically what you are looking for? A free set of anything is a bonus

 

I haven't had an interior in my fb for over 10 years so can't take a picture.
It's just your interior door lock.
Aka what you push or pull to lock and unlock your doors inside.
Thanks for helping out.

 

Im assuming just these then. https://i.ebayimg.com/images/g/RtMAA...b2S/s-l300.jpg

I will be tearing the interior out to do a deep clean and see whats under the carpet anyways so that wont be a problem.

Ill keep you updated!

 

Yep that's it.
Thanks

 

Send me a pm