cheapo presilencer?
#1
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Ohio
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
cheapo presilencer?
Would an Edelbrock RPM series muffler last in place of a catalytic conv. as a presilencer? If not, what do you think would (excluding the actual presilencers from RB)?
#2
add to cart
Join Date: Jun 2002
Location: Saskatoon, SK & Montreal, PQ
Posts: 4,180
Likes: 0
Received 0 Likes
on
0 Posts
when it comes to exhaust components, cheap = more expensive. You'll be replacing them every 10-12 months.
Buy high quality exhaust components once rather than crap several times over.
Buy high quality exhaust components once rather than crap several times over.
#3
Retro Rocket
Originally posted by Manntis
when it comes to exhaust components, cheap = more expensive. You'll be replacing them every 10-12 months.
Buy high quality exhaust components once rather than crap several times over.
when it comes to exhaust components, cheap = more expensive. You'll be replacing them every 10-12 months.
Buy high quality exhaust components once rather than crap several times over.
#7
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Ohio
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Manntis
when it comes to exhaust components, cheap = more expensive. You'll be replacing them every 10-12 months.
Buy high quality exhaust components once rather than crap several times over.
when it comes to exhaust components, cheap = more expensive. You'll be replacing them every 10-12 months.
Buy high quality exhaust components once rather than crap several times over.
On a car that sees 3 to 5,000 miles per year, I don't need any kind of million mile gaurantee, just something that won't burn up right away (or at least not before the rest of the Pace-Setter stuff dies). In fact, to that end it would seem the cheap stuff I've already got and wish death upon is holding up forever just to spite me!
Trending Topics
#9
Use a Magnaflows 4" round muffler with 2", 2.25 or 2.5" inlet/outlets. Have flanges welded on for fit http://www.magnaflow.com/03cat-back/...steelround.htm It has stainless steel packing. They cost about $70 and are comperable to the RB presilencer.
Thread
Thread Starter
Forum
Replies
Last Post
jeremyferguson4444
1st Generation Specific (1979-1985)
8
09-19-15 01:27 PM