12A transmission options
#1
Beater King
Thread Starter
Join Date: Aug 2005
Location: Victoria BC
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
12A transmission options
My syncros are nearly gone from 3rd down into 2nd.
I have access to a few 13b S4 and maybe S5 N/A transmissions. Will they bolt on? Are the mounts the same, and shift location?
Needs to fit onto my 12a.
I have access to a few 13b S4 and maybe S5 N/A transmissions. Will they bolt on? Are the mounts the same, and shift location?
Needs to fit onto my 12a.
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,826
Received 2,594 Likes
on
1,842 Posts
the S4 is easiest, it just needs the FB tailshaft housing swapped over.
#7
Beater King
Thread Starter
Join Date: Aug 2005
Location: Victoria BC
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Will the length be the same? I just had a new driveshaft made. :S
My race car doesn't use a speedo. So I'm assuming it's not necessary.
-Is the overall length of the trans the same, and
-what is the purpose of the tailshaft swap?
My 12a is in a Corolla, so the shifter position doesn't matter for my specific usage.
-Do they use different driveshaft splines?
My race car doesn't use a speedo. So I'm assuming it's not necessary.
-Is the overall length of the trans the same, and
-what is the purpose of the tailshaft swap?
My 12a is in a Corolla, so the shifter position doesn't matter for my specific usage.
-Do they use different driveshaft splines?