(TURBO) TII swap into GSL-SE
#101
Banned. I got OWNED!!!
Originally posted by Directfreak
By the way,
For you guys in the "Boosted Circle" I posted over 60 pics of that 12A Turbo that runs low 10's.
good helpful, handy stuff.
All Kinds of pictures, from every angle.
They can me seen here
BTW, Full Boost Magazine from Australia wants to do an article on it, just from the notoriety it got on this board.
Pretty Damn Cool if you ask me.
By the way,
For you guys in the "Boosted Circle" I posted over 60 pics of that 12A Turbo that runs low 10's.
good helpful, handy stuff.
All Kinds of pictures, from every angle.
They can me seen here
BTW, Full Boost Magazine from Australia wants to do an article on it, just from the notoriety it got on this board.
Pretty Damn Cool if you ask me.
#102
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by 680RWHP12A
is that silver car in the pics your car??? i have personally seen and met the owner of that car in texas... that car is clean!!!!that car is the only 12a turbo that can hang with mine!
is that silver car in the pics your car??? i have personally seen and met the owner of that car in texas... that car is clean!!!!that car is the only 12a turbo that can hang with mine!
He's they guy in the pics next to the car.
By the way, the car is about to bust into the 9's...
My car is in my signature, but I am not going for the "Drag Race" titles. My car has A/C, Power Steering, A Stereo system with Subs, and lots of gadgets.
I already ordered a Mariah Mode One widebody as well. My car is definately just meant to be a fast street car (that runs low 11's )
680RWHP12A Show us your setup that makes 680 hp. Not just the car, but the engine.
Last edited by Directfreak; 10-26-02 at 12:08 PM.
#105
I can has a Hemi? Yes...
iTrader: (2)
Any better pics? I find 540rwhp (on a 12A) on only 18 PSI, and using a blow-through nikki carb a little hard to swallow.
Theres plenty of guys using fully ported 13B's with all the goodies (like EFI and Haltechs) not getting that kind of power on more PSI, and race fuel.
Are you telling us you broke the secret? Or is this a "one time wonder" kind of engine, that will lasted only one run before it grenaded?
Steve (AJC13B) has much more into his setup, and gets that kind of power on a Cosmo 13B at sick boost levels, using race fuel.
Please give the full specs on this setup. I am not even going to ask where you got the 680rwhp from on the "other" one.
I am not one to call it often at all, because I've seen plenty of anomolies out there. But until you can prove otherwise...
Theres plenty of guys using fully ported 13B's with all the goodies (like EFI and Haltechs) not getting that kind of power on more PSI, and race fuel.
Are you telling us you broke the secret? Or is this a "one time wonder" kind of engine, that will lasted only one run before it grenaded?
Steve (AJC13B) has much more into his setup, and gets that kind of power on a Cosmo 13B at sick boost levels, using race fuel.
Please give the full specs on this setup. I am not even going to ask where you got the 680rwhp from on the "other" one.
I am not one to call it often at all, because I've seen plenty of anomolies out there. But until you can prove otherwise...
#106
Banned. I got OWNED!!!
Originally posted by Directfreak
Any better pics? I find 540rwhp (on a 12A) on only 18 PSI, and using a blow-through nikki carb a little hard to swallow.
Theres plenty of guys using fully ported 13B's with all the goodies (like EFI and Haltechs) not getting that kind of power on more PSI, and race fuel.
Are you telling us you broke the secret? Or is this a "one time wonder" kind of engine, that will lasted only one run before it grenaded?
Steve (AJC13B) has much more into his setup, and gets that kind of power on a Cosmo 13B at sick boost levels, using race fuel.
Please give the full specs on this setup. I am not even going to ask where you got the 680rwhp from on the "other" one.
I am not one to call it often at all, because I've seen plenty of anomolies out there. But until you can prove otherwise...
Any better pics? I find 540rwhp (on a 12A) on only 18 PSI, and using a blow-through nikki carb a little hard to swallow.
Theres plenty of guys using fully ported 13B's with all the goodies (like EFI and Haltechs) not getting that kind of power on more PSI, and race fuel.
Are you telling us you broke the secret? Or is this a "one time wonder" kind of engine, that will lasted only one run before it grenaded?
Steve (AJC13B) has much more into his setup, and gets that kind of power on a Cosmo 13B at sick boost levels, using race fuel.
Please give the full specs on this setup. I am not even going to ask where you got the 680rwhp from on the "other" one.
I am not one to call it often at all, because I've seen plenty of anomolies out there. But until you can prove otherwise...
#107
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by 680RWHP12A
if youdont believe how my car runs you can always ask Ari Yallon.... or Abel Iberra... or pluto on the forum..they all know how my car runs! and my car doent blow up every run... its a rotary
if youdont believe how my car runs you can always ask Ari Yallon.... or Abel Iberra... or pluto on the forum..they all know how my car runs! and my car doent blow up every run... its a rotary
I don't want to ask other people about your setup. There have been several many people connecting you to MazdaRacing and giving you a bad rep. I'd rather hear it from you than some biased person.
So once again, are you gonna spill the beans on this massive 12A?
Even the Silver 12A that runs low 10's doesn't have 680 rwhp. So what does yours run? 8's?
#108
back with rotaries
iTrader: (7)
that impossible that a 12a can make 680hp, specially at the wheels. show your setup, what you are running, alcohol, i dont think that a 12a will pass over 400hp turbo and nitrous. most of the drag racers cant make more that 680hp unless they have a 20B!!!! do you want to have a bad reputation here.
#109
Banned. I got OWNED!!!
Originally posted by Directfreak
So.. Your not gonna tell us some details and specs? Or more pictures?
I don't want to ask other people about your setup. There have been several many people connecting you to MazdaRacing and giving you a bad rep. I'd rather hear it from you than some biased person.
So once again, are you gonna spill the beans on this massive 12A?
Even the Silver 12A that runs low 10's doesn't have 680 rwhp. So what does yours run? 8's?
So.. Your not gonna tell us some details and specs? Or more pictures?
I don't want to ask other people about your setup. There have been several many people connecting you to MazdaRacing and giving you a bad rep. I'd rather hear it from you than some biased person.
So once again, are you gonna spill the beans on this massive 12A?
Even the Silver 12A that runs low 10's doesn't have 680 rwhp. So what does yours run? 8's?
To make 680whp i switched over to EFI halltech F9 , and more boost 28 psi ... the short version..
my 680 dyno sheet www.rotaryshack.com/dyno
#111
Banned. I got OWNED!!!
best on the nikki setup was 10.40 @ 137 mph on drag radials with some wheel spin... havent been to the track sine the EFI has been installed but ill let you know how it runs!
#114
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
I would believe 680 flywheel HP.
I believe 10.40 @ 137mph with 680 flywheel hp.
I do not believe 680hp rear wheel.
I do not believe 540hp rear wheel through a nikki carb
I don't care who you know. I know TV people, doesn't mean I can act.
I believe 10.40 @ 137mph with 680 flywheel hp.
I do not believe 680hp rear wheel.
I do not believe 540hp rear wheel through a nikki carb
I don't care who you know. I know TV people, doesn't mean I can act.
#119
Banned. I got OWNED!!!
i will have some video of the car soon on this link... www.Rotaryshack.com/movies im still learning how to use the softeare so give me some time... i put some video clips up already to see if it works... ill be adding new clips as we edit them so check back for new ones!!!
#120
Currently Winning
Join Date: May 2002
Location: Birmingham, AL
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
um. correct me if i'm wrong, but with 8.8 gears, fourth gear will be WAY below the ideal 1:1 dyno ratio. Right? Which would also explain your torque being as low as it is.
#121
Senior Member
Join Date: Mar 2001
Location: Springfield, Missouri USA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by $150FC
um. correct me if i'm wrong, but with 8.8 gears, fourth gear will be WAY below the ideal 1:1 dyno ratio. Right? Which would also explain your torque being as low as it is.
um. correct me if i'm wrong, but with 8.8 gears, fourth gear will be WAY below the ideal 1:1 dyno ratio. Right? Which would also explain your torque being as low as it is.
With an 8.8:1 ring and pinion, he could launch in 3rd and wrap it off the tach in time in 5th to blow it up before he passed the 1/4 mile.
#122
Banned. I got OWNED!!!
Originally posted by faster7
I'm sure by 8.8 rear, he's meaning a Ford 8.8" based rear end, not the ratio.
With an 8.8:1 ring and pinion, he could launch in 3rd and wrap it off the tach in time in 5th to blow it up before he passed the 1/4 mile.
I'm sure by 8.8 rear, he's meaning a Ford 8.8" based rear end, not the ratio.
With an 8.8:1 ring and pinion, he could launch in 3rd and wrap it off the tach in time in 5th to blow it up before he passed the 1/4 mile.
#123
I can has a Hemi? Yes...
iTrader: (2)
My new Turbo Manifold!!
It is simply a work of Art. It was made specifically for my Cosmo Turbo 1st Gen project.
BEFORE:
Just a bunch of pipes and bends from Racing Beat.
AFTER:
A Bad *** Turbo manifold for a Cosmo 13B, with an HKS GT 60mm Wastegate.
It is simply a work of Art. It was made specifically for my Cosmo Turbo 1st Gen project.
BEFORE:
Just a bunch of pipes and bends from Racing Beat.
AFTER:
A Bad *** Turbo manifold for a Cosmo 13B, with an HKS GT 60mm Wastegate.
Last edited by Directfreak; 11-13-02 at 04:35 PM.
#124
I can has a Hemi? Yes...
iTrader: (2)
OVERVIEW
It was made by my good friend, Andres, The Mazda Specialist. He makes them for any model you may need
Whether it be R100,RX3,SA,FB,FC,FD, - whatever. He does very nice work. He does rebuilds, porting, etc. All the Goods.
His email is mazdaspc@netzero.com if you guys need anything too.
Either way I was so excited, I had to share
It was made by my good friend, Andres, The Mazda Specialist. He makes them for any model you may need
Whether it be R100,RX3,SA,FB,FC,FD, - whatever. He does very nice work. He does rebuilds, porting, etc. All the Goods.
His email is mazdaspc@netzero.com if you guys need anything too.
Either way I was so excited, I had to share