VaGambler

iTrader: (1)

I am working on a S5 T2 with stock engine and have a stock and moddified CAS's. My problem is getting a stable RPM reading on the Wolf3DV4. The RPM indicated during cranking is normally at around 250 with jumps to 1200 or maxed into the redline. I have not been able to get the RPM to steady out during cranking. Any help before I ****-can this Wolf for a Microtech. Engine is all stock at this piont and I am just trying to start the car right now. I have moved the trigger wires so that it goes from the CAS strait to the Wolf (had a spare harness) to avoid interferance, but nothing changed.

nyt

iTrader: (1)

read your PM that i replied to you

nyt

iTrader: (1)

p.s. your map wont load for me

nyt

iTrader: (1)

the file you wanted

VaGambler

iTrader: (1)

ok lets try this again, let me know if this works

thanks in advance

nyt

iTrader: (1)

nope not working

to save a map the best way is

file -> transfer

from connected ecu to pc file

VaGambler

iTrader: (1)

ok, lets try this again

let me know if you get this one

Thanks in advance

nyt

iTrader: (1)

nope. comes up as a blank map.

maybe you got a bad unit? somethin isnt working right.. and i opened this one on a different computer also.

eViLRotor

iTrader: (2)

Just FYI, I can open the first two just fine...his last map is all zeroes.

nyt

iTrader: (1)

theyre all 0's for me =[

Michael Smith

Looks just like my bank account RED and all zeros!!!! You need to go online and load the data from the ECU then File transfer FROM Screen TO PC File ........add the name and then you should be off. My guess is that you already have a file with all Zero's of that name and you are not overwriting it.
Michael Smith