Wolf 3D anyone looking for a wolf
help
Originally Posted by VaGambler
if I cant get this car running in the next week or 2 I'll be selling my wolf 4 . Anyone with more common sense interested ????
Thanks Va
Thanks Va
916 289 0488
Chris Greene
The main problem right now is that we cant get the injectors to fire(spray) . We are having a few friends over tomm night to try and figure this out . We are going to check the wirring 1st and then the program , Is there anything that can be turned off on the wolf that I might have done accidently .??? I'll reprt back tomm evening
Thanks guys
Thanks guys
post your map. i'll take a look through.
do you have spark and no fuel?
your injectors should have 12v to one lead, and the wolf to the other.
injector 1/2 obviously go to 1/2
the staged injectors are wired in parallel to the wolf.
ie: they both get 12v to one lead, then the second leads meet up with the wolf staged injector wire.
do you have spark and no fuel?
your injectors should have 12v to one lead, and the wolf to the other.
injector 1/2 obviously go to 1/2
the staged injectors are wired in parallel to the wolf.
ie: they both get 12v to one lead, then the second leads meet up with the wolf staged injector wire.
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
how are the injectores wired?
are they getting power? enough power?
my friend used an 'automotive' relay from radioshack, it sucked, wired them directly to the batt, problem solved
are they getting power? enough power?
my friend used an 'automotive' relay from radioshack, it sucked, wired them directly to the batt, problem solved
Its Alive
Cant tell you where we went wrong . I had a friend come over and look at things , but did not change anything . 10 min later she sytarted right upo with no problems . I will post the map tomm to let you guys take a look . Im sure we need some fine tunning . But thanks to the 2 brains behind this car
Thanks in advance
Thanks in advance
Trending Topics
The first time you fire up your wolf you need to have a good battery it seems to take some convincing that the CAS is ok before it fires the injectors for the fire time. Mine done the same but I knew my wiring was correct because I was using a wolf V3 before and it was OK. I used a set of jumper leads and a second battery after that it worked ok!
Michael Smith
P.S. my battery has been relocated in the boot..has yours???
Michael Smith
P.S. my battery has been relocated in the boot..has yours???
yea , I have relocated my battery too, but I had a battery charger hooked up and running at 15 amps the entire time we were working on it . I dont have a clue , but Im damn happy its running
Thread
Thread Starter
Forum
Replies
Last Post



