how do u do it????? and is there a link to show me how?

 

I have not the foggiest idea what you're talking about.

 

The twin-scroll flapper in the S4 exhaust manifold.

If you want one that's already deleted, I have one...

 

Drill it out, tap the manifold, put a stud in, and a nut on both sides, then weld the nuts to the bolt.

 

Or cut and take out the flapper and just weld it shut.

 

what is the point of taking out the flapper whats the advantage in doing this

 

also curious about that question!

pros and cons to a stock turbo?

 

That's kinda why I was confused.

Why would you want to do that? Seems you would have a whole lot more to loose than gain.

 

You would do this if you port matched the turbo runners and if you want to remove the twin scroll system. I've done this mod with good results.

 

bring it by my shop, Il remove the flapper and weld it up for ya. Just bring me beer

 

hmm thats odd i went to one welding shop in my area today and the guy couldnt weld a piece of stainless steel into the flapper hole. he told me to bring it to a machine shop to get a dowel pressed in there

for sure ill pm you if i cant get it done in my area since your all the way in el monte