feeler, 12a turbo kit complete!
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: lake tahoe/sacramento
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
feeler, 12a turbo kit complete!
i just wanted to see what the demand would be like on a complete draw through turbo kit for the 12a. i have two in stock with everything necesary except the turbo and wastegate. All the tubing is there, carb adapter, large low profile air filter, exhaust and wastegate, flanges/tubing/even a tiny wastegate muffler. if you're interested let me know and we can work a price out.
Gabe
gabe@turbo-power.com
Gabe
gabe@turbo-power.com
#3
Junior Member
Thread Starter
Join Date: Sep 2005
Location: lake tahoe/sacramento
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
no draw through = safety and blowthrough = carburator shrapnel on a hot day! it's for a holley to bolt onto i think so i'm sure you could supply plenty of fuel
#6
Junior Member
Thread Starter
Join Date: Sep 2005
Location: lake tahoe/sacramento
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
draw through is where the turbo pulls air through the carb before being compressed and sent into the engine, and blow through is where the turbo compresses air into the carb. draw through takes no special adjustments except a fuel pressure regulator and bigger main jets. blow through takes a special setup where you seal the carb so the bowl see's the same pressure that the throttle plate see's, also some serious jetting adjustments will need to be made.
12annitroussandrail: i wouldn't worry about delayed starts cuz the longer it cranks the more oil pressure builds up before load applied
i will post some pics as soon as i get them taken
12annitroussandrail: i wouldn't worry about delayed starts cuz the longer it cranks the more oil pressure builds up before load applied
i will post some pics as soon as i get them taken
Trending Topics
#12
Senior Member
lets see it
The following users liked this post:
LEGALIZECHEY (07-16-20)
The following users liked this post:
LEGALIZECHEY (07-16-20)
Thread
Thread Starter
Forum
Replies
Last Post
stinkfist
1st Generation Specific (1979-1985)
10
07-31-03 03:54 PM
MIKE-P-28
1st Generation Specific (1979-1985)
17
03-13-02 01:57 PM