feeler, 12a turbo kit complete!
i just wanted to see what the demand would be like on a complete draw through turbo kit for the 12a. i have two in stock with everything necesary except the turbo and wastegate. All the tubing is there, carb adapter, large low profile air filter, exhaust and wastegate, flanges/tubing/even a tiny wastegate muffler. if you're interested let me know and we can work a price out.
Gabe gabe@turbo-power.com |
draw through, no...blowthrough, yes.
|
no draw through = safety and blowthrough = carburator shrapnel on a hot day! it's for a holley to bolt onto i think so i'm sure you could supply plenty of fuel
|
the only problem that i have with me draw through is that it is hard to start. but send me some pics maybe i will buy one or both.
|
whats drawthrough and blowthrough?
|
draw through is where the turbo pulls air through the carb before being compressed and sent into the engine, and blow through is where the turbo compresses air into the carb. draw through takes no special adjustments except a fuel pressure regulator and bigger main jets. blow through takes a special setup where you seal the carb so the bowl see's the same pressure that the throttle plate see's, also some serious jetting adjustments will need to be made.
12annitroussandrail: i wouldn't worry about delayed starts cuz the longer it cranks the more oil pressure builds up before load applied i will post some pics as soon as i get them taken |
yeah, but doesn't your turbo foul up after a while though because you are pumping fuel through the turbo...
|
not if you use a fuel filter and don't go extremely rich, it just takes a turbo with a carbon seal.
|
specs/pics on the turbo, manifold, etc?
|
pictures, and prices?
|
interested in this if its still available. shoot me a message
|
lets see it
|
yeah, lets see it....
:AA: |
All times are GMT -5. The time now is 09:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands