car wont start help please
#1
Cobra Killer
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: El Monte, Calinafornia
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
car wont start help please
hey thanks for clicking im having a bit of a problem with my car (just so u know i have tired doing a search but i couldn't find anything to really help) ok my car is an 88 t2 has a fresh rebuilt engine with a street port. i have had the car turn on a few times. i was able to get it started only by holding the maf open about half way and had to keep feeding it gas till the car warmed up once it was warm it would stay on.
i would turn on my car and drive it around my gated community and just park it after because i cant keep my car in the same spot for more then 3 days...... one day i went out to start it it wouldn't start instead it back fired 2 times ever since then i haven't been able to get it started.
i have changed the tps, throttle body, ecu, and the maf. i have also done the timing on it. anyone have any ideas on what it could be?
any help would be greatly appreciated
here is a video of the first time it started (apparently it wouldn't let him rev it up)
i would turn on my car and drive it around my gated community and just park it after because i cant keep my car in the same spot for more then 3 days...... one day i went out to start it it wouldn't start instead it back fired 2 times ever since then i haven't been able to get it started.
i have changed the tps, throttle body, ecu, and the maf. i have also done the timing on it. anyone have any ideas on what it could be?
any help would be greatly appreciated
here is a video of the first time it started (apparently it wouldn't let him rev it up)
Trending Topics
#8
Rotary Enthusiast
iTrader: (4)
Join Date: Jun 2007
Location: California
Posts: 1,114
Likes: 0
Received 0 Likes
on
0 Posts
If you have to keep giving it gas, maby its a fuel problem. When have you last changed your fuel filter? Also, do a fuel pressure test and check the factory manual to see what the specs should be. If the car is cranking over fine but not startng, it could be a fuel delivery problem.
#9
Cobra Killer
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: El Monte, Calinafornia
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
i was considering changing the fuel filter then i realized i have fuel in my rail so that shouldn't be the problem as a mater of fact when i pulled out my old plugs they were dark colored, wet and smelled of gas
and i have check if i had spark and i do
and i have check if i had spark and i do
#13
Cobra Killer
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: El Monte, Calinafornia
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
i bought bran new spark plugs de-flooded the engine then put the new plugs in still nothing and wacky ill junk it if i can have the rx3 u took to seven stock
#18
Cobra Killer
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: El Monte, Calinafornia
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
yea i did check both of those im a little low on blinker fluid but it should work for a while what i really need is a muffler bearing.....
the diff is fixed now, i got a new intercooler for it
and the fuel problem seems to be maybe a clogged fuel filter or dirty injectors
thanks to RXnos1200 for stopping by and helping me out
the diff is fixed now, i got a new intercooler for it
and the fuel problem seems to be maybe a clogged fuel filter or dirty injectors
thanks to RXnos1200 for stopping by and helping me out
#21
Cobra Killer
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: El Monte, Calinafornia
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
car is running now..... now theres another problem turbo is glowing red after idling for 5-10 mins also the idle is at 1500 rpms im guessing it an intake leak of some sort
#23
Cobra Killer
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: El Monte, Calinafornia
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
grrrr i need to figure out what wrong with my car my turbo keeps over heating and i have tried doing the timing like 3 times today and my idle is still at 200 rpm