NEW Rotary Parts.....
#205
hukd in fonikz
iTrader: (3)
Join Date: Dec 2008
Location: weatherford, Tx
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Billet drop spindles would rock. I give a +1 on that.
So would a reasonably priced big brake kit for the FC.
Hint: contact Willwood. I forget exactly who I was talking to but their calipers and 2 piece rotors for a FC kit are cheap. Just never had the money for a bit of trial and error.
how about some FC turbo manifolds that dont cost your first born? HKS? $800? hahaha!
So would a reasonably priced big brake kit for the FC.
Hint: contact Willwood. I forget exactly who I was talking to but their calipers and 2 piece rotors for a FC kit are cheap. Just never had the money for a bit of trial and error.
how about some FC turbo manifolds that dont cost your first born? HKS? $800? hahaha!
#210
Check us out at the Shop of 3 Rotor Heaven Rotary-Works Cars .....We have 4 current 3 Rotor cars!!! built and tuned at our shops.Check us out at local Racing Events and car shows with our products in action...
We are using the V-mount kit,oil coolers kit on the FC and our latest coil overs available through us(V-mounts in the coming weeks),
The 4th car Drifter FD also 3 Rotor power using Rotary-Works Coil overs for the upcoming Formula drift series,build up in progress...
We are using the V-mount kit,oil coolers kit on the FC and our latest coil overs available through us(V-mounts in the coming weeks),
The 4th car Drifter FD also 3 Rotor power using Rotary-Works Coil overs for the upcoming Formula drift series,build up in progress...
Last edited by Rotary-Works.com; 02-16-10 at 04:33 PM.
#213
Will you be selling cages as well, or is this just a personal project?
02-17-10 10:16 PM
02-17-10 10:16 PM
We are actually planning on making Roll cage kits for FA/FB,FC,FD and possible older cars like the Rx2,Rx3 etc... if there is a market for it.We have a mandrel bender and can make multiple duplicates of the same bends.The cages could be done in Drifting specs and drag racing specs.Will come with steel plates to be welded for the floor,fully cut and notched to length.We will offer weld in type roll cages NOT slip on joint.
Let us know if there is interest,we have the machine ready to go.
#214
Senior Member
iTrader: (1)
Join Date: Dec 2008
Location: Vancouver, BC
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
I'll be buying a drag cage soon. Nothing fancy though as I don't expect to run fast enough to actually need it. Mostly just for some extra piece of mind. If pricing was comparable to other options then I'd be in.
#216
what is the spring rate on the fc coilover kit? and whats the lowest ride height it will go? how much to shipped to 95132
They are $830 shipped within the U.S....
#221
LOOK what we got here...almost done.We will have the complete V-Mount kit bolt on to fit the Mazda Rx7 FC chassis using single turbo.More pictures on the way of the fully installed V-mount on our FC Rx7.
Our single turbo complete V-mount kit will include:
(note: this will work with stock power steering ,Must use aftermarket TB intake Elbow)
:Custom large Aluminum Radiator 3 rows 4 pass
:Large 3.5 inch thick Intercooler
:Front stainless steel oil cooler support(works like a front brace)
:Front lower Aluminum Radiator support
:Rear upper Aluminum Radiator support
:Stainless steel brackets and hardware bolts
:Series 4&5 aluminum Water neck
:Aluminum expansion tank
:Hoses,Clamps and blow off valve
:High performance Oil Cooler with AN-10 fittings(Optional)
All this for $1100+Shipping
Add oil cooler another $225
$1325+shipping with oil cooler!!
We will also sell the V-mounts kits in individual parts.......for those who want to make their own unique intercooler set ups.
We are also working on some Throttle body cast elbows,but for the mean time we will offer the kits sooner.
Don't Forget we also sell the billet throttle body for Turbo2...$350+shipping.
Our single turbo complete V-mount kit will include:
(note: this will work with stock power steering ,Must use aftermarket TB intake Elbow)
:Custom large Aluminum Radiator 3 rows 4 pass
:Large 3.5 inch thick Intercooler
:Front stainless steel oil cooler support(works like a front brace)
:Front lower Aluminum Radiator support
:Rear upper Aluminum Radiator support
:Stainless steel brackets and hardware bolts
:Series 4&5 aluminum Water neck
:Aluminum expansion tank
:Hoses,Clamps and blow off valve
:High performance Oil Cooler with AN-10 fittings(Optional)
All this for $1100+Shipping
Add oil cooler another $225
$1325+shipping with oil cooler!!
We will also sell the V-mounts kits in individual parts.......for those who want to make their own unique intercooler set ups.
We are also working on some Throttle body cast elbows,but for the mean time we will offer the kits sooner.
Don't Forget we also sell the billet throttle body for Turbo2...$350+shipping.
Last edited by Rotary-Works.com; 02-19-10 at 11:58 PM.