will you be offering cast goods?

LIM/ UIM combos?

I like to see one of your TB's for a 13B RE UIM.

 

How much is the coolant neck specifically for the s5?

Lloyd

 

BILLET DROP SPINDLES PLEASE!!!

make them adjustable (camber shims)

and convert them to Porsche type roller bearings (ditching the standard cup/cone type we currently use)

 

Tubular K Member for the drag guys !!!!!!!!!!

That would be the bomb

 

Billet drop spindles would rock. I give a +1 on that.

So would a reasonably priced big brake kit for the FC.
Hint: contact Willwood. I forget exactly who I was talking to but their calipers and 2 piece rotors for a FC kit are cheap. Just never had the money for a bit of trial and error.

how about some FC turbo manifolds that dont cost your first born? HKS? $800? hahaha!

 

An affordable (at least more affordable) set of FD drop spindles would be sick.

 

Ordered my coilovers tonight!

 

I will order the 13b race headers for a 1st gen rx7 but first i would like to see a pic for compatibility to the RHD rx7`s in Oz

Thanks

Michael...

 

Here is the Titanium bolts and flywheel nut in our stock room....these are made with pride and joy for the rotary community.

$60 for TI the front bolt
$100 for the TI flywheel nut

 

Check us out at the Shop of 3 Rotor Heaven Rotary-Works Cars .....We have 4 current 3 Rotor cars!!! built and tuned at our shops.Check us out at local Racing Events and car shows with our products in action...

We are using the V-mount kit,oil coolers kit on the FC and our latest coil overs available through us(V-mounts in the coming weeks),

The 4th car Drifter FD also 3 Rotor power using Rotary-Works Coil overs for the upcoming Formula drift series,build up in progress...

 

GOT ANGLE?We are 50 percent on our roll cage for the FD Drifter and fully stitch welded on complete body.Keep you guys on your feet.

 

Will you be selling cages as well, or is this just a personal project?

 

We are actually planning on making Roll cage kits for FA/FB,FC,FD and possible older cars like the Rx2,Rx3 etc... if there is a market for it.We have a mandrel bender and can make multiple duplicates of the same bends.The cages could be done in Drifting specs and drag racing specs.Will come with steel plates to be welded for the floor,fully cut and notched to length.We will offer weld in type roll cages NOT slip on joint.

Let us know if there is interest,we have the machine ready to go.

 

I'll be buying a drag cage soon. Nothing fancy though as I don't expect to run fast enough to actually need it. Mostly just for some extra piece of mind. If pricing was comparable to other options then I'd be in.

 

what is the spring rate on the fc coilover kit? and whats the lowest ride height it will go? how much to shipped to 95132

 

They come in standard 10kgfront and 8kg back......You can go as low as you want,that's if you want to rub your tires into your fenders, also in Red or blue collets.

They are $830 shipped within the U.S....

 

U got any gsl-se rad in stock?

 

How about an aluminum gas pedal assembly for the FD?

 

I'm interested in purchasing your fc coilover kit how or where do i send the $$$

 

How is the website coming along?

 

LOOK what we got here...almost done.We will have the complete V-Mount kit bolt on to fit the Mazda Rx7 FC chassis using single turbo.More pictures on the way of the fully installed V-mount on our FC Rx7.

Our single turbo complete V-mount kit will include:
(note: this will work with stock power steering ,Must use aftermarket TB intake Elbow)

:Custom large Aluminum Radiator 3 rows 4 pass
:Large 3.5 inch thick Intercooler
:Front stainless steel oil cooler support(works like a front brace)
:Front lower Aluminum Radiator support
:Rear upper Aluminum Radiator support
:Stainless steel brackets and hardware bolts
:Series 4&5 aluminum Water neck
:Aluminum expansion tank
:Hoses,Clamps and blow off valve
:High performance Oil Cooler with AN-10 fittings(Optional)

All this for $1100+Shipping

Add oil cooler another $225

$1325+shipping with oil cooler!!

We will also sell the V-mounts kits in individual parts.......for those who want to make their own unique intercooler set ups.

We are also working on some Throttle body cast elbows,but for the mean time we will offer the kits sooner.

Don't Forget we also sell the billet throttle body for Turbo2...$350+shipping.

 

^Will this setup work with the stock turbo?

Also what type of blow off valve? You had mentioned a fan/shroud combo upgrade as well pics and price on that?

 

Cant wait to get the TB...

By any chance will you be making a FD alternator relocation bracket for people with no A/C and PS who want to use a EWP.

 

does this price include braided lines and fittings?
any pics of this setup in a fc 2 rotor? the pics with the 3 rotor uses a different i/c core

 

**titanium part request**

eccentric shaft pulley boss

that's alot of weight on the main drive. third gen motors don't have the slick racingbeat one piece pulley option.

keep up the good work!!