Time Slips
#227
Full Member
Join Date: Mar 2005
Location: Prospect, Ohio
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Car ran pretty good tonight. 1st run 11.5 at 123 1.7 60 ft next good pass was 11.5 at 118 1.5 60ft and had to let out at the 1/8 almost hit the wall lol. I think it would of been a great pass if I could of stayed in it. That was it for the knight. Great knight for racing
Car tuned by Jason and Zavier @ rx7store.net
Car tuned by Jason and Zavier @ rx7store.net
#228
Eats, Sleeps, Dreams Rotary
Car ran pretty good tonight. 1st run 11.5 at 123 1.7 60 ft next good pass was 11.5 at 118 1.5 60ft and had to let out at the 1/8 almost hit the wall lol. I think it would of been a great pass if I could of stayed in it. That was it for the knight. Great knight for racing
Car tuned by Jason and Zavier @ rx7store.net
Car tuned by Jason and Zavier @ rx7store.net
#229
just dont care.
iTrader: (6)
i went back to the track tonight with my 93 base model. over the summer i replaced the downpipe and hiflow cat with an ebay downpipe/midpipe, and i'm using the STOCK CATBACK...
so now the mods are:
apexi intakes
DP/MP
full nonsequential
(note: stock ecu, stock IC, stock catback, stock 10psi)
my best run of the night (3 runs) was 12.71@109mph.
previously (as in my sig) i ran a 12.51@111mph with a DP/hiflowcat/RBcatback.
so i basically got .2sec slower and 2mph slower by switching to the stock catback.
i am technically selling my car, but i really want to see what it will do with a pettit ECU at 12psi with a full exhaust! definitely low 12's at ~113mph
so now the mods are:
apexi intakes
DP/MP
full nonsequential
(note: stock ecu, stock IC, stock catback, stock 10psi)
my best run of the night (3 runs) was 12.71@109mph.
previously (as in my sig) i ran a 12.51@111mph with a DP/hiflowcat/RBcatback.
so i basically got .2sec slower and 2mph slower by switching to the stock catback.
i am technically selling my car, but i really want to see what it will do with a pettit ECU at 12psi with a full exhaust! definitely low 12's at ~113mph
Last edited by jacobcartmill; 09-01-07 at 10:57 PM.
#231
Senior Member
iTrader: (1)
Join Date: Nov 2006
Location: Ontario
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
12.65@113.32MPH
2.02 60 foot
1993 RX-7 Base (34,000 miles on the car)
MODS:
3" Downpipe
3" Midpipe with 3" highflow cat welded in (still running air pump)
2.5" Catback
Pettit ECU
Profec B Spec II Boost controller
I am very happy given I have not spent much on mods. I can't wait to see what it will do with an air intake and intercooler.
Backed up the 12.65 with a 12.68 and a few 12.7s.
2.02 60 foot
1993 RX-7 Base (34,000 miles on the car)
MODS:
3" Downpipe
3" Midpipe with 3" highflow cat welded in (still running air pump)
2.5" Catback
Pettit ECU
Profec B Spec II Boost controller
I am very happy given I have not spent much on mods. I can't wait to see what it will do with an air intake and intercooler.
Backed up the 12.65 with a 12.68 and a few 12.7s.
#233
Senior Member
iTrader: (6)
12.65@113.32MPH
2.02 60 foot
1993 RX-7 Base (34,000 miles on the car)
MODS:
3" Downpipe
3" Midpipe with 3" highflow cat welded in (still running air pump)
2.5" Catback
Pettit ECU
Profec B Spec II Boost controller
I am very happy given I have not spent much on mods. I can't wait to see what it will do with an air intake and intercooler.
Backed up the 12.65 with a 12.68 and a few 12.7s.
2.02 60 foot
1993 RX-7 Base (34,000 miles on the car)
MODS:
3" Downpipe
3" Midpipe with 3" highflow cat welded in (still running air pump)
2.5" Catback
Pettit ECU
Profec B Spec II Boost controller
I am very happy given I have not spent much on mods. I can't wait to see what it will do with an air intake and intercooler.
Backed up the 12.65 with a 12.68 and a few 12.7s.
#237
just dont care.
iTrader: (6)
the track was hella busy and we only got 2 runs. i'm still runnin on my regular street tires. my mods are intakes/downpipe/powerFC/MBC@12psi and i was running open downpipe. it hits 12psi and creeps up to 13.5-14psi
my second run resulted in:
1.80 60ft
7.7@92 1/8th
12.0@115 1/4
my second run resulted in:
1.80 60ft
7.7@92 1/8th
12.0@115 1/4
#240
Does not drive a WRX!!!
iTrader: (6)
Best run tonite... keep in mind this was like my 5th time down the 1/4mile ever in my life so I'm still a noob. On BFG Drag Radials and 13-14psi boost, misshift/grind into 3rd gear tho.
R/T - .9
60ft - 1.75
1/8 ET - 7.98
1/8 MPH - 87mph
1/4 ET - 12.45
1/4 MPH - 111mph
All the other runs I bogged on the launch but had 115mph traps so should be a low 12 with some practice and no gear grinding, hah. Link to mods in sig...
R/T - .9
60ft - 1.75
1/8 ET - 7.98
1/8 MPH - 87mph
1/4 ET - 12.45
1/4 MPH - 111mph
All the other runs I bogged on the launch but had 115mph traps so should be a low 12 with some practice and no gear grinding, hah. Link to mods in sig...
#242
www.mancavecolorado.com
Well it's the end of the season.....my best pass was back to back 11.2 @ 123 with a 1.55 60ft. That was with the car dynoing at 472hp (corrected). Now I have 522hp but the tracks are closed here so we will wait to see what it runs next Spring!
#243
Eats, Sleeps, Dreams Rotary
trap seems low fopr that power.
#245
www.mancavecolorado.com
That's why I put corrected hp. It's 310hp uncorrected, but that won't make since to you on how I ran that fast. Racing at 6000ft above sealevel changes a lot of things. This car at sealevel would also run a mid 10 since my GT35/40 stops making power at 21.5lbs up here.
#247
www.mancavecolorado.com
#248
Full Member
Join Date: Oct 2007
Location: NoVi Michigan
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Im new to this FD thing i just recently bought a black 93 less than a month ago, its got a pfs turbo back exhaust, replaced vacuum lines, extra coolant tank, pfs stock mount ic, mazdaspeed flywheel, ngk plugs, slotted rotors, stock boost. Right now ive got an oil leak im trying to deal with.
But besides that im just curious as to what kind of dyno and 1/4mile numbers i should see w/ a GT35r w/ fmic and supporting fuel mods (800cc primarys, 1600cc secondary, fpr, pump, etc.) and a pfc and boost controller moderately tuned to lets say 15psi on 93 pump gas on a stock r1 motor w/ approx. 20k miles.... I just want some of your guys' input here, since i plan on doing this setup by the beginning of next spring along w/ new clutch/flywheel, radiator, wideband and some other little things.. I still got a lot to learn about the rotary and ive been going through these boards reading up on things and i just wanna see what yall got to say.
oh and is it possible to safely run 17-18psi on the stock motor w/out meth or race gas, or is even 15psi pushing it. j/w
-Thanks
But besides that im just curious as to what kind of dyno and 1/4mile numbers i should see w/ a GT35r w/ fmic and supporting fuel mods (800cc primarys, 1600cc secondary, fpr, pump, etc.) and a pfc and boost controller moderately tuned to lets say 15psi on 93 pump gas on a stock r1 motor w/ approx. 20k miles.... I just want some of your guys' input here, since i plan on doing this setup by the beginning of next spring along w/ new clutch/flywheel, radiator, wideband and some other little things.. I still got a lot to learn about the rotary and ive been going through these boards reading up on things and i just wanna see what yall got to say.
oh and is it possible to safely run 17-18psi on the stock motor w/out meth or race gas, or is even 15psi pushing it. j/w
-Thanks
#249
Junior Member
Join Date: Nov 2007
Location: Australia
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
My first 1/4 Mile go.
Was tonight via a GTech Pro RR Meter on a so so bit of back road.
Did a 13.7 @ 107 Mph with two people in the car and a full tank of gas.
My 60 foot time was attrocious.
Also tried a 0 - 100 Kph - 0 Test.
Managed a 9.8 seconds with a 6.0 0-100 time
has anyone else tried this how did you go.
A 7.0 or lower is considered out of sight brilliant for the go to whoa.
Did a 13.7 @ 107 Mph with two people in the car and a full tank of gas.
My 60 foot time was attrocious.
Also tried a 0 - 100 Kph - 0 Test.
Managed a 9.8 seconds with a 6.0 0-100 time
has anyone else tried this how did you go.
A 7.0 or lower is considered out of sight brilliant for the go to whoa.
#250
Chasing numbers
iTrader: (5)
Im new to this FD thing i just recently bought a black 93 less than a month ago, its got a pfs turbo back exhaust, replaced vacuum lines, extra coolant tank, pfs stock mount ic, mazdaspeed flywheel, ngk plugs, slotted rotors, stock boost. Right now ive got an oil leak im trying to deal with.
But besides that im just curious as to what kind of dyno and 1/4mile numbers i should see w/ a GT35r w/ fmic and supporting fuel mods (800cc primarys, 1600cc secondary, fpr, pump, etc.) and a pfc and boost controller moderately tuned to lets say 15psi on 93 pump gas on a stock r1 motor w/ approx. 20k miles.... I just want some of your guys' input here, since i plan on doing this setup by the beginning of next spring along w/ new clutch/flywheel, radiator, wideband and some other little things.. I still got a lot to learn about the rotary and ive been going through these boards reading up on things and i just wanna see what yall got to say.
oh and is it possible to safely run 17-18psi on the stock motor w/out meth or race gas, or is even 15psi pushing it. j/w
-Thanks
But besides that im just curious as to what kind of dyno and 1/4mile numbers i should see w/ a GT35r w/ fmic and supporting fuel mods (800cc primarys, 1600cc secondary, fpr, pump, etc.) and a pfc and boost controller moderately tuned to lets say 15psi on 93 pump gas on a stock r1 motor w/ approx. 20k miles.... I just want some of your guys' input here, since i plan on doing this setup by the beginning of next spring along w/ new clutch/flywheel, radiator, wideband and some other little things.. I still got a lot to learn about the rotary and ive been going through these boards reading up on things and i just wanna see what yall got to say.
oh and is it possible to safely run 17-18psi on the stock motor w/out meth or race gas, or is even 15psi pushing it. j/w
-Thanks
Stock ports will hold you back no matter what turbo you use. I would say with a 35r (good choice with stock ports) and the supporting mods @15psi and a good tunner you will be around 380-400rwhp. Your question on running more boost safely is a whole other question with pump gas. Just run a meth inj kit and be safe. That will take you well on above 17psi! But kinda a waste on those ports.