475hp / 401 tq @ 22psi T04z half bridge
04-06-13, 09:09 PM
#1
547hp at the flywheel
Thread Starter
iTrader: (30)
Join Date: Oct 2008
Location: Chicago
Posts: 1,223
Likes: 0
Received 0 Likes
on
0 Posts
475hp / 401 tq @ 22psi T04z half bridge
T04z garrett, half bridge port, pre turbo meth/water injection (wannaspeed), blitz FMIC, 6x1000 ev14 injectors, greddy titanium 4" exhaust, aeromotive 340lph stealth pump
All pulls done on a dynojet. Intake temps were around 40 but the pipes were all easy to touch by hand. injector duty was 75-78%, 11.3afrs. pulls strong. probably had room to keep going to 500 but I tend to be heavy on the skinny pedal so we stopped at 22psi. Steve Kan tune.
Ill get the log files from the dyno and post them.
All pulls done on a dynojet. Intake temps were around 40 but the pipes were all easy to touch by hand. injector duty was 75-78%, 11.3afrs. pulls strong. probably had room to keep going to 500 but I tend to be heavy on the skinny pedal so we stopped at 22psi. Steve Kan tune.
Ill get the log files from the dyno and post them.
04-07-13, 08:35 PM
#3
Junior Member
Join Date: Sep 2012
Location: ct
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
wow thats some serious power. im working on a build similar to yours and ihope to be pushing same amount of power. weather is delaying me a bit because its too cold still but im getting there...
04-08-13, 10:20 PM
#7
547hp at the flywheel
Thread Starter
iTrader: (30)
Join Date: Oct 2008
Location: Chicago
Posts: 1,223
Likes: 0
Received 0 Likes
on
0 Posts
Here are the sheets. first one is just the dyno (the 401 torque is from the run after this). Second one is same run but with AFR as a second map
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
