T04z garrett, half bridge port, pre turbo meth/water injection (wannaspeed), blitz FMIC, 6x1000 ev14 injectors, greddy titanium 4" exhaust, aeromotive 340lph stealth pump

All pulls done on a dynojet. Intake temps were around 40 but the pipes were all easy to touch by hand. injector duty was 75-78%, 11.3afrs. pulls strong. probably had room to keep going to 500 but I tend to be heavy on the skinny pedal so we stopped at 22psi. Steve Kan tune.

Ill get the log files from the dyno and post them.

 

Forgot to mention 8.5:1 t2 compression rotors

 

wow thats some serious power. im working on a build similar to yours and ihope to be pushing same amount of power. weather is delaying me a bit because its too cold still but im getting there...

 

What octane ???

 

Most likely 93.

 

93 octane

 

Here are the sheets. first one is just the dyno (the 401 torque is from the run after this). Second one is same run but with AFR as a second map

 

There isn't anyway you could post the map is there?

 

sorry, not going to share the map