Powerflex vs. Superpro
#101
Full Member
iTrader: (1)
Join Date: Feb 2006
Location: Des Plaines
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
hey just to help the community out there is a shop by my house that pushed out all my bushings for 250 bucks. http://tf-works.com/ they did an great job and it was pretty cheap. I know shipping them over here might be a pain, again they got them all out in a day and everything went smooth. I took all the suspension pieces out of my car and brought them to them. Now I just got to get the new bushings in ;P
#102
No more G6
iTrader: (19)
Those of you with Superpro bushings how difficult was it for you to mount up everything after the new bushings were pressed in? Reason i ask is i spent about an hour trying to get my front upper arm in and it still doesn't line up with the holes. It's like the bushing that in there is to big. Anyone else run into this?
#105
Golf Cart Hooligan
iTrader: (12)
My rear upper arms were a bitch. I had to tap them in with a mallet. I lubed them up real good on the sides too. When I manually move the whole assembly through its travel they squeak and it actually looks like the bushings stay stationary and the control arm moves around the bushings... oh well im sure they will sort themselves out when I get it back on the road
#107
Original Gangster/Rotary!
iTrader: (213)
Those of you with Superpro bushings how difficult was it for you to mount up everything after the new bushings were pressed in? Reason i ask is i spent about an hour trying to get my front upper arm in and it still doesn't line up with the holes. It's like the bushing that in there is to big. Anyone else run into this?
#112
Full Member
Join Date: Apr 2010
Location: Czech republic
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
i have superPRO with stock KYB suspension and that is really tough.
actualy searching for some lowering (softer) spring for my KYB. (if this possible?) actualy this setup is not for street, circuit rather
actualy searching for some lowering (softer) spring for my KYB. (if this possible?) actualy this setup is not for street, circuit rather
#115
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Charlotte
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Powerflex sells the LCA bushing (shock mount) if you're interested in a PU replacement
Also, apparently the rubber boots for my ball joints all have cracks in them, so you may want to replace those while you're in there
Also, apparently the rubber boots for my ball joints all have cracks in them, so you may want to replace those while you're in there
#117
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Charlotte
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Ok, usually when the term "pillowball" is used with reference to these cars, it refers to the six soild bushings at the rear, not the ball joints at each corner
#120
SideWayZ The Only Way
iTrader: (11)
yea i know, if its awhile back i dont think they can do anything about it now... i do wish they would state what kit it is on their site, first thing i did when i got it was check it all out to make sure its exactly what i ordered which should be done with anything,..
#123
Senior Member
iTrader: (30)
I spoke with hinson and apparently they sell two different kits, which the confusion stems from that not being stated on the site. I called and ordered mine at which time I also was not told. After speaking to Brian, I think but I'm not sure that's his name, he quickly figured things out and seems to be eager to rectify the situation. So far I'm very pleased with their service and hope to hear back soon to figure out exactly what is going to happen.
For the eccentric sleeves for the rear upper control arm I'm just having some center bored replacement sleeves made just incase I may want the eccentric sleeves in the future. Brian is working on finding out if he can get me the only two bushings that are missing that were listed as being part of the kit.
For the eccentric sleeves for the rear upper control arm I'm just having some center bored replacement sleeves made just incase I may want the eccentric sleeves in the future. Brian is working on finding out if he can get me the only two bushings that are missing that were listed as being part of the kit.