No Cones

Do you plan on testing non-RB pad compounds (e.g., Hawk)? As this kit doesn't require a change in pads for the rear, I'm sure track folks would be interested in hearing how their current pads compare to the RB. As Hawk is arguably the most popular in the FD world seems like it would be a good product to test against.

shawnk

I ordered a rear kit on Tuesday to try and get them in for a birthday present to myself in August (heard they were backordered). I received them today!

I am using Hawk pads in the rear so I will be able to give some feedback though my track experience isnt as large as others who are already participating in this thread. I have had wilwood superlites on the front with stock in the rear and was having a problem with the rear stepping out under hard breaking on the track.

Of course I will have to finish my rebuild this weekend before any brake testing will happen at all.

Thanks for everyone participating in this thread. I have been looking for a good solution for the rears and with all the info here I finally found something to pull the trigger on.

Thanks Howard for your work!

Also thanks to Racing Brake for putting this kit together for the FD community.

sdoow

Our backorder is for front BBK only the rear BBK can be shipped upon order.

Meantime just to keep everyone up to date, we are shipping the first batch of pre-orders! The brake pads are preloaded and the caliper is preassembled to the adaptor for your easy installation.

sdoow

For the purpose of motorsports racing pad selection our front pad (4-piston caliper) is a non FMSI pad but it is very popular racing pad (same as AP 4-pot caliper) that is available from most major brake pad manufactures including PFC, Pagid, Hawk, etc... Hawk has Blue, HT-10, HT-14, DTC-60, DTC-70 available and they are all stocked in our warehouse except Blue.
http://www.racingbrake.com/4_piston_RB_440_s/3289.htm

For the rear it is FMSI #D332 which Hawk has offered Blue and HT-10 compounds only. We no longer stock their Blue compound because it is very unfriendly to the rotor (if you do not heat up properly you can easily score the rotor), but for your choice we are listing Blue which will be available on order basis same as front.
http://www.racingbrake.com/SearchRes...?Search=PD332-

Again RB brake pads are being offered as an option. Our brake system are not designed to exclude any other brake pad manufactures in any way except you have to make sure that:

1. Brake pad you choose will not have the brake deposit issue
2. You should not use street pads and try to race on the track which may over stress the rotor and create surface cracks on the rotor and shorten the rotor life

These two warning are in our front page of our two-piece rotor selection:
http://www.racingbrake.com/Twopiece_Rotors_s/519.htm

You may agree that Howard is more to test RB brake system performance with proper brake pad setup that RB provides. As time goes by we are sure other racers will contribute their experience with other pad manufactures and various compounds.

Herblenny

iTrader: (13)

Just received an email regarding shipping of my BBK! Can't wait to get them!

aoc007

iTrader: (5)

So, what fluid is recommended with the kit? I am currently using ATE Superblue.

jkstill

iTrader: (11)

Please keep us apprised of how this works for you.

I have the same brake setup in front with Porterfield R4 pads, and Hawks in the rear,
and am interested to see how the rear upgrade works out for you.

wptrx7

Picking mine up on Friday, it was ready since last week.

Callsign_Vega

iTrader: (3)

Mine shipped today. Any update on how these brakes are doing on the track?

gnx7

iTrader: (10)

What is the update Howard on the track visit. Have you established a date yet?

That is what the majority of us care about. Really want to see some findings before I blow $2500.

GoodfellaFD3S

iTrader: (213)

Btw guys, Ray Crowe is selling reman'ed rear calipers for 115 a pop. I picked up a pair, already painted a nice silver which should match my titanium fronts pretty well

jimlab

Gee Mark, I thought you already blew $2,500 on them a couple months ago. Didn't you post back in May that you'd already ordered your kit?

https://www.rx7club.com/showpost.php...&postcount=415

I'm confused. You were apparently sure enough of receiving them that you've been listing them as mods in your signature on V8rx7forum.com for the last month or so...

http://www.v8rx7forum.com/411323-post3.html

What gives?

No Cones

And that is relevant how? Attaining track "findings" remains the question at hand.

Howard Coleman

iTrader: (6)

i, today, received a swap set of calipers for the betas i have been running. the betas had aluminum pistons and the new caliper's pistons are stainless steel.

i also received today a set of 900 rear pads. i now have what i need to go tracking.

BTW, there are a few other important updates on the calipers and they, of course, are the configuration that will be shipped.

i do apologise for the delay as to doing a track evaluation but running aluminum pistons would have been a waste of time and money. i actually would have gone out with the alum pistons but lacked the rear 900s. i am leaving w the wifey for a weeks vacation saturday so perhaps some of you will be ontrack before me.

perhaps someone running real race rubber since as i previously mentioned i don't do slicks. my car is dual purpose and having spent 22 seasons actually racing i enjoy a couple of clicks off full trailer prep.

i will be at Blackhawk as soon as i return and i will find out just what these brakes are worth even w Toyos..

in the meantime i do hope some of you get out before me.

howard coleman

Herblenny

iTrader: (13)

Just got my kit today... Looks good!!



Now finding time to install it.. that might be tricky..

aoc007

iTrader: (5)

Oh man, I'm excited

gnx7

iTrader: (10)

Dear ******** (Jimblab)-

RB isn't charging people until they ship them. So literally.... before I blow $2500 I would like to see wtf they are capable of.

Some people plan on racing with them... instead of jerking off on them in the depths of their garage like you have been with your neverending RX-7 build fairytale. You probably had to change colors/engines just to keep it exciting when you pull your pants down all by your lonesome with your FD after 7 years of it being in pieces.

Your completed project if that ever happens should be perfect for trips to 7-Eleven for big gulps to cool that big head of yours.

You are a serious *sshole with some childish complex certainly... it is the only explanation for coming off as the biggest ***** ever on way too many forums.

Get a grip dude and most importanty get a life. Do you have one away from the internet... or is the weather in WA that crappy you don't go outside.

I'm awaiting your nutswinger pal from TX to chime in shortly..... he must be your only friend.

No Cones

This guy is meaningless to me...but in case it matters to anyone else, I figured I would provide an example of what a classless bully looks like. The following drivel is from my PMs ... Defense of this type of correspondence is unfathomable. I'll no longer waste my time replying to this character's venom.

habu2

Could we please keep this thread on topic?

Flog each other all you want via PMs but please don't waste everyone else's time.

cewrx7r1

iTrader: (2)

Now I know why you asked me to come to Birmingham!
We can do it if time allows us.

Herblenny

iTrader: (13)

Chuck, I would never make you wrench when you are here I want you to enjoy Bham and hanging out with some rotorheads...

jimlab

So why are you listing them in your signature as a mod, implying that you already own them? You know, like the LS7 you keep talking about, but no one has actually seen...

Ah, so that's what you call paying for the privilege of driving around a track for a day.

At least I can post pictures of all the parts I've actually followed through on purchasing...

Coming from someone who's only about 5 feet tall, that's pretty funny.

So what would you call someone who lies about what parts they've bought in order to get attention?

No Cones

As requested...

SPICcnmGT

I would like to see this thread stay on topic also. Or maybe start a new "RB BBK TEST " thread so we can all see how well these work, especially on the track, because that is where all the real capabilities of these will be seen.

GoodfellaFD3S

iTrader: (213)

I already PMed a mod to have it cleaned up.

Man, I am *drooling* at the prospect of getting the kit in the mail soon. I doubt I'll have time to roadrace the car anytime soon, but they'll still look sexy installed on the car