turbos
08-12-03, 12:17 PM
#4
Junior Member
Thread Starter
Join Date: Aug 2003
Location: gc, ny
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
my car is totally stock rite now cuz i bought it 2 weeks ago....i wanna get about 450-500 rwhp, and i really want the turbo to start spooling at a low RPM...........im gonna get a greddy evo exhaust, apexi power FC ecu, rotary extreme ss downpipe, and im not sure what type of intercooler
08-12-03, 12:19 PM
#5
Junior Member
Thread Starter
Join Date: Aug 2003
Location: gc, ny
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
i mean do you think a single turbo is worth putting in? and im open to any opinions about turbos....i dont only want the t88 or an hks turbo i just want one that will give me big gains but spool at a low RPM
08-12-03, 12:35 PM
#6
I really think you should search. There are TONS of posts on single turbo, which one spools better than that one, etc, etc, etc.
Spend a few weeks reading, and then if you have more specific questions, post.
Also, you are going to need TONS more stuff than 3 or 4 things that you listed, fuel pump, injectors, FPR, intake, boost controller, etc, etc
-Chris
Spend a few weeks reading, and then if you have more specific questions, post.
Also, you are going to need TONS more stuff than 3 or 4 things that you listed, fuel pump, injectors, FPR, intake, boost controller, etc, etc
-Chris
Trending Topics
08-12-03, 01:26 PM
#8
All Motor
iTrader: (2)
Join Date: Mar 2003
Location: Redmond, WA
Posts: 1,604
Likes: 0
Received 0 Likes
on
0 Posts
To get 400RWHP basically the cheapest you can do it is maybe $10,000. Most of this is all the things you need to buy to support that HP, clutch, FPR, fuel pump, injectors, exhaust, FMIC, ECU, spark plugs, ignition amplifier gauges, dynotuning, then you need a single turbo kit, or build your own with a manifold, turbo, wastegate, BOV. Probably the best spool and best power that I would recommend is either the Apexi RX-6 kit of GT 35/40, you can make 370-400rwhp @ 15PSI on pump gas and spool up fine with stock ports. I have $5,000 in parts installed in my car or waiting to be installed and have to buy maybe 2K more and a turbo kit and I will have a single turbo. Its worth doing it since it gets a lot of the stuff out of the engine bay, is simpler to work on, looks nice, and less heat.
Thread
Thread Starter
Forum
Replies
Last Post