turbo oil/water feedline help
04-15-06, 07:44 PM
#1
I'm on a Boat!
Thread Starter
iTrader: (15)
Join Date: May 2003
Location: OK
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
turbo oil/water feedline help***pix***
Ok guys here is my problem. I just received my garrett to4R turbo from rx7store.net and there is a problem with the turbo oil/water feed fittings.
I need to know exactly what size the fittings are from the turbo oil feed line and the ports on the turbo it goes to. They are both female connection. but i didn't receive the fitting(s) that go in between it.
They also gave me the banjo bolt and fitting for the water feed/return line. but they are too small for the openig on the turbo. I need to know what size the wholes are on the turbo. I am quessing about a 16mm because i took the banjo bolt to autozone and they said it was a 14mm x 1.25 or 1.5(something like that.)
If anyone could tell me where i could find the banjo bolts and fittings for the things i need it would help a lot.
Thanx in advance,
Cyan
I need to know exactly what size the fittings are from the turbo oil feed line and the ports on the turbo it goes to. They are both female connection. but i didn't receive the fitting(s) that go in between it.
They also gave me the banjo bolt and fitting for the water feed/return line. but they are too small for the openig on the turbo. I need to know what size the wholes are on the turbo. I am quessing about a 16mm because i took the banjo bolt to autozone and they said it was a 14mm x 1.25 or 1.5(something like that.)
If anyone could tell me where i could find the banjo bolts and fittings for the things i need it would help a lot.
Thanx in advance,
Cyan
Last edited by ProjectD; 04-15-06 at 08:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
