does anybody know anything about htis turbo. its an ihi turbo. i was told it comes on the greddy supra 20g kits

i just picked one up dirt cheap and wondering what its all about

its a t4 exhaust side with what looks like a v band exhaust but it doesnt have a lip on it so i dont know

thanks for you input

 

ha double post im retarded

 

pull the cover off, and give some specs, inducer/exducer sizes, housing A/R's etc, do same for exhaust side.

Ain't many people on the forum can read your mind, and without seeing the specs nobody would be able to offer up much.

The IHI turbines RCH-7b and RHC-6b are both fairly robust as far as they are really reliable, but you will pay out the *** for a rebuild, as I just found out. (I have a C-7 also) they are basically a clone of the T04 series, with some minor differences, and there quality control was great (but they quit selling in favor of the RX-6 BB series

Kenn

 

I wonder if any of you could point me in the direction where I can find a turbo manifold for my 3rd gen

 

Sorry, i live OCNUS, and don't know any stateside places other than what you see here on the forum, try Steve Kan screen name pluto, or Ted RETED, or check in the vendor section.

kenn

 

thank's man

 

Have some available.
With equal primaries, either in T3 or T4 inlet flange
To view go to: http://img.photobucket.com/albums/v112/GT1-20b/
Go to the end.

 

how do i measure the sizes inducer exducer? just measer across side to side...im guessing

i feel dumb for askin that

 

sorry been outta country for a couple of weeks pull the compressor houseing off, and measure the widest part of the wheel, go up the wheel to where the second set of "fins" end, and measure there give your measurements in millimeters. for a good explanation do a quick search on t04 and several of the threads have some diagrams posted on where to measure exactly. those same posts have the formulas to calculate the "trim" of the wheel, but it won't match any of the HKS/Garret specs, and unfortunatlye it seems to be damn near impossible to get the compressor maps from IHI, at least I have had no luck in that department.

kenn