andre sinclair

iTrader: (36)

Heard that alot of rotary enthusiast are starting to use "Klotz R50" as premix.

For those using it, could you provide a little infomation / comparison to the "Castrol Racing A747" 2 stroke oil.

Thanks,

Andre

zinx

iTrader: (3)

I haven't used it, but i do use the Klotz Uplon with my meth AI and know their products are well respected.

It looks like the R50 would work well, but i've never had any problems use the off-the-shelf TCW-3 premixes. I think its mostly Valvoline stuff.

fritts

iTrader: (5)

Klotz Benol with E85 here.

turboR1

Klotz R50 is not alcohol compatible which means it wont mix and gel up. So E85 or meth users should not be using it. Its a full synthetic oil which I personally dont like for my own reasons.

Castrol 747A is a semi synthetic.. it uses castor oil which I love mixed with there own syn blend of something... awesome smell. this is really good 2 stroke oil. best of both worlds.. not sure how it mixes with other fuels since I only used this in my 2 strokes.

I have been using Maxima 927 Castor oil in my car with E85.. This is good stuff too its a pure castor oil which is bean oil i think.. its natural stuff with some synthetic additives to make it burn cleaner and thats about it.. mixes great with all fuels. I go thru a gallon of this a month whether in my car or bikes or go karts. never had a problem.

Blendzall is another awesome oil.. also a castor oil.. prob the best around

Dont like Amsoil. that doesnt mix well with alcohol either.

thewird

iTrader: (8)

Klotz Uplon is methanol compatible? I was always wondering what I was going to do about the methanol anti-lube nature. Any other products that mix with methanol or won't get diluted by the methanol if i put it in my gas tank or does it make a difference if its in the gas tank or the methanol tank?

thewird

fritts

iTrader: (5)

But Benol is compatible.

http://klotzlube.com/storeProdDetails.asp?pi=6

andre sinclair

iTrader: (36)

The manufacture states that Castrol A747 is a very high performance, low ash, part synthetic lubricant with castor oil, specially formulated for use in multi-cylinder, water-cooled two stroke engines fitted to road racing machines, where combustion chamber deposit control is essential.

However, I`ve just changed my fuel filter and took a sample of fuel from the outlet side / hose leading towards the motor. I notice the oil wasn`t totally desolved within the fuel (hence the question was raised).

I`ve used Amsoil Dominator Synthetic in the past and after disassembling a motor with many miles (for a cracked corner seal) the motor internally was clean as a whistle (beyond belief).

I started to use the Castrol A747 because I got a case of 12 quarts for 30.00 (very cheap). But, I`m running out and so i need a decent alternative.

Keep the recommendations coming, thanks.

Andre

Howard Coleman

iTrader: (6)

while i am extremely picky about my crankcase motor oil... i will not run anything but Mobil 1 5-30.... i am exactly the opposite w my premix. IMO any TCW3 rated 2 cycle oil will do. i buy the Tech stuff from Walmart at $10 a gallon.

i did open my motor after 4 years and 14,000 miles (including over 120 4th gear dyno runs) and there was no carbon build anywhere. that's after 2 years running 1400 CC/Min of meth.

BTW, i do not put anything in the meth. straight alcohol. some meth additives are bad for the pump. certain internals work well w alcohol but not w gasoline.

i do not recommend using the EOP unless you rig it so it uses 2 cycle and not the dirty 4 cycle oil from the crankcase.

howard

AlexG13B

iTrader: (7)

anyone use pennzoil full synthetic?

E Dogg

iTrader: (1)

what mix ratios are you all using? about the same as standard fuel or a little more?

zinx

iTrader: (3)

1 oz : 1 gal in both meth with uplon and gas with TCW3.

E Dogg

iTrader: (1)

i just bought a car a few weeks ago that the previous owner was mixing TCW3 with E85, id beti have a nice pile of TCW sludge in the bottom of my fuel tank I can attest the inside of that motor looked like it wasn't pre-mixed enough and some of the seals were dry.

fritts

iTrader: (5)

A 16oz bottle of Benol for a tank fill ~14 gal.

TwinCharged RX7

iTrader: (14)

I'm about to start running meth, 1200cc/min, but it wont be on that often, just a hard pull in scramble mode once in a while.

The previous owner of my car was using 6ounces of klotz per fill up.

How much do you use Howard? and just to make sure, you use any type of TCW3 in the gas tank, and that doesn't interfere with the meth at all?

andre sinclair

iTrader: (36)

So, I guess my 5 oz. to the tank is way off?

TwinCharged RX7

iTrader: (14)

The previous owner had once had the car tuned at PFS, and they had gone through the car and made a list of notes for him. On it, it says 8oz of premix/tank, it was crossed off and says 6/oz.

Not sure who made the change. I've upgraded the car quite a bit, but I've been using 6oz/tank, when i go to get tuned I'll check with Ray at PFS and make sure its ok.

So I guess your 5oz may be a bit low.

andre sinclair

iTrader: (36)

I assume that it must vary from the type of oil you use for premix, because, Pettit Racing recommends 4 oz. of there Pro-Tech R / fill up.

elwood

iTrader: (1)

I'm using Madatrix' recommended Idemitsu. They suggest 1/2 Oz/gallon.

Vierte

iTrader: (2)

im preparing to make the switch to E85 and was wondering if anyone has had problems with oil seperating after extended periods of time. I drive the car at most once a week and only fuel it bi-weekly or monthly. Im a little concerned that the oil will not stay suspended.