Post Your Single Turbo Setup.
#551
I LOVE PISTONS
Join Date: Sep 2001
Location: Philippines
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Car: Dont have one, it got repossed by the bank
Turbo: junkyard yugo turbo
Boost: Hopefully 1psi one day
Manifold: midas muffler shop tubular egual length carbon fiber manifold
Wastegate: I have a waste in the gate at least once a day, but more if I drink milk cause im lactose intolerant
RWHP: What is rwhp? I only know kilowatt
EMS: Emergency Medical Station...?
Turbo: junkyard yugo turbo
Boost: Hopefully 1psi one day
Manifold: midas muffler shop tubular egual length carbon fiber manifold
Wastegate: I have a waste in the gate at least once a day, but more if I drink milk cause im lactose intolerant
RWHP: What is rwhp? I only know kilowatt
EMS: Emergency Medical Station...?
#552
1.5 PSI @ 1800RPM and full Boost= 16PSI @ 3200RPM
Dyno Run + finish Maping come next year.
#555
Retired First Sergeant
iTrader: (18)
1979 12 a turbo
here is the video
http://www.youtube.com/watch?v=dxaaI...ture=recentlik
1979 RX7
engine build by Kilo Racing
12a Bridge ported and dowelled
TURBONETICS T72 p trim .96
wastegate from innovative turbo
Microtech Ltx8
HKS B.O.V
(4) 1100cc injectors
Custom intercooler
3.5 inch dump pipe/ 3 inch exhaust
Racing beat TII flywheel and clutch and intake manifold
ACCEL throttle body
ACT pressure plate
T2 tranny
GSL-SE rear end
http://www.youtube.com/watch?v=dxaaI...ture=recentlik
1979 RX7
engine build by Kilo Racing
12a Bridge ported and dowelled
TURBONETICS T72 p trim .96
wastegate from innovative turbo
Microtech Ltx8
HKS B.O.V
(4) 1100cc injectors
Custom intercooler
3.5 inch dump pipe/ 3 inch exhaust
Racing beat TII flywheel and clutch and intake manifold
ACCEL throttle body
ACT pressure plate
T2 tranny
GSL-SE rear end
#558
mazda Rx7 1996
HKS T04E with 0.64A turbine side
HKS40mm External
POWER FC
550cc primary - 1300cc secondary
Massive blitz intercooler with 12cm width
420 engine @ 1 bar
I get 1.15-1.2 in 1st and second gear , 1.3 at 3rd dropping to 1.15 and 1.4 in 4th dropping to 1.25
What do you recon is my power?
Also is there anybody else running a T04E by HKS to compare specs?
HKS T04E with 0.64A turbine side
HKS40mm External
POWER FC
550cc primary - 1300cc secondary
Massive blitz intercooler with 12cm width
420 engine @ 1 bar
I get 1.15-1.2 in 1st and second gear , 1.3 at 3rd dropping to 1.15 and 1.4 in 4th dropping to 1.25
What do you recon is my power?
Also is there anybody else running a T04E by HKS to compare specs?
#560
rock wat u got
iTrader: (1)
Join Date: Feb 2009
Location: Snohomish
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 gs staying 12a
Turbo: ct 26
Boost: (est) 10-15
Manifold: making my own to covert to FI
Wastegate: ct 26 internal wastgate
RWHP: not done yet goal 300rwhp
EMS: apexi pfc
im still im progress of making every thing heres some pics
Turbo: ct 26
Boost: (est) 10-15
Manifold: making my own to covert to FI
Wastegate: ct 26 internal wastgate
RWHP: not done yet goal 300rwhp
EMS: apexi pfc
im still im progress of making every thing heres some pics
#564
Junior Member
hey i just have a stock s4 turbo 2 i just replaced the turbo due to bearing and it was grinding but before took off turbo would get cherry hot after just a minute or too off running i replaced the turbo with a s5 but put my s4 back and manifold on and now it still gets cherry hot is that my wastegate or maybe a plugged oil line
#571
Uncontrollable drifter
iTrader: (1)
Oh well might as well post mine as well:
13BRE mild street port(pineapple ports)
KKK K28/29 turbo(soon to be Borg Warner S366)
Custom manifold
550cc primaries, 1680cc secondaries
Walbro in tank 255lph
Ebay intercooler(works very well!)
Ebay 60mm wastegate(also works very well!)
custom 3in single ->dual exhaust canisters
13BRE mild street port(pineapple ports)
KKK K28/29 turbo(soon to be Borg Warner S366)
Custom manifold
550cc primaries, 1680cc secondaries
Walbro in tank 255lph
Ebay intercooler(works very well!)
Ebay 60mm wastegate(also works very well!)
custom 3in single ->dual exhaust canisters
#572
Who say's i need a Van
iTrader: (18)
Join Date: Feb 2009
Location: Whatsittoya
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
93 vr automatic
Stock ports
-t04s bb turbo
-deleted emissions
-1300/550
-water/meth
-hks twin power
-power fc
-pettit boost controler
-tial 44mm waste gate
-PFS med SMIC
-full wide open 3" exhaust
-greddy RS BOV
-Bansai auto power fc harness
-HP fuel pump
Just finished install, first time for me....no tune yet.....309whp before build on stock twins
http://www.youtube.com/watch?v=RJPUhhE0UjM
Stock ports
-t04s bb turbo
-deleted emissions
-1300/550
-water/meth
-hks twin power
-power fc
-pettit boost controler
-tial 44mm waste gate
-PFS med SMIC
-full wide open 3" exhaust
-greddy RS BOV
-Bansai auto power fc harness
-HP fuel pump
Just finished install, first time for me....no tune yet.....309whp before build on stock twins
http://www.youtube.com/watch?v=RJPUhhE0UjM
#573
Who say's i need a Van
iTrader: (18)
Join Date: Feb 2009
Location: Whatsittoya
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
as previously said twins were 309whp...but turns out that was an anomaly. True whp was only 280. See attachment of old dyno graph
See attachment of new single turbo conservative tuned dyno graph with similar anomaly.....shows 358whp but 330whp without the weird spike at the very top end
http://www.youtube.com/watch?v=UsvWOTxLtUg
See attachment of new single turbo conservative tuned dyno graph with similar anomaly.....shows 358whp but 330whp without the weird spike at the very top end
http://www.youtube.com/watch?v=UsvWOTxLtUg
#574
Full Member
iTrader: (1)
Join Date: Feb 2009
Location: UK
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
My 12a turbo
Here is some pics of my rx7 build :
Running large extend port 12a
Injection perfection IDA throttle body
2 1200cc 2 1700cc injectors
12a Cosmo rotors
SCR apex seals
Bosch motorsport pumps
Haltech PS1000
Garrett TO4r - 1.15ar rear
Pre turbo water injection setup
50mm GFB wastegate
3" exhaust
S5 turbo gearbox with shortened shifter kit
4.4 lsd
Running large extend port 12a
Injection perfection IDA throttle body
2 1200cc 2 1700cc injectors
12a Cosmo rotors
SCR apex seals
Bosch motorsport pumps
Haltech PS1000
Garrett TO4r - 1.15ar rear
Pre turbo water injection setup
50mm GFB wastegate
3" exhaust
S5 turbo gearbox with shortened shifter kit
4.4 lsd
Last edited by bo0557; 07-01-11 at 07:38 AM.