Post Your Single Turbo Setup.
02-18-08, 08:18 PM
#402
Car: 93 touring rx-7
Turbo: Garrett GT35R T3 .70A/R 1.06 hotside
Boost: (est) 15-17psi (still setting up)
Manifold: unknown
Wastegate: PSR 45mm
Injectors: 850cc prim 1200cc sec
Ignition: HKS twin power
RWHP: yet to test
EMS: Apexi Power FC
Should be done by tomorrow...just waiting on FPD and still need to install Greddy Profec B specII. Eventually I'll get to getting all black couplers lol.
Turbo: Garrett GT35R T3 .70A/R 1.06 hotside
Boost: (est) 15-17psi (still setting up)
Manifold: unknown
Wastegate: PSR 45mm
Injectors: 850cc prim 1200cc sec
Ignition: HKS twin power
RWHP: yet to test
EMS: Apexi Power FC
Should be done by tomorrow...just waiting on FPD and still need to install Greddy Profec B specII. Eventually I'll get to getting all black couplers lol.
06-30-08, 12:31 PM
#408
A-Spec short runner T3 manifold
Medium street port 13B REW
PowerFC
850primary/1300secondary - modified stock rails
Aeromotive FPR (all SS lines)
Dual Denso pumps
portmatched intake manifolds
ported and polished TB
TiAL 46mm wastegate/TiAL 50mm BOV
Crooked Willow Racing large SMIC
HKS twin power
**EMISSIONS COMPLIANT W/AIRPUMP**
422rwhp/333ftlb torque @ 15psi on pump gas
FWIW,
Crispy
07-04-08, 12:12 AM
#409
GT35R .70A/R 1.06 hotside
A-Spec short runner T3 manifold
Medium street port 13B REW
PowerFC
850primary/1300secondary - modified stock rails
Aeromotive FPR (all SS lines)
Dual Denso pumps
portmatched intake manifolds
ported and polished TB
TiAL 46mm wastegate/TiAL 50mm BOV
Crooked Willow Racing large SMIC
HKS twin power
**EMISSIONS COMPLIANT W/AIRPUMP**
422rwhp/333ftlb torque @ 15psi on pump gas
FWIW,
Crispy
A-Spec short runner T3 manifold
Medium street port 13B REW
PowerFC
850primary/1300secondary - modified stock rails
Aeromotive FPR (all SS lines)
Dual Denso pumps
portmatched intake manifolds
ported and polished TB
TiAL 46mm wastegate/TiAL 50mm BOV
Crooked Willow Racing large SMIC
HKS twin power
**EMISSIONS COMPLIANT W/AIRPUMP**
422rwhp/333ftlb torque @ 15psi on pump gas
FWIW,
Crispy
07-04-08, 02:53 AM
#410
GT35R .70A/R 1.06 hotside
A-Spec short runner T3 manifold
Medium street port 13B REW
PowerFC
850primary/1300secondary - modified stock rails
Aeromotive FPR (all SS lines)
Dual Denso pumps
portmatched intake manifolds
ported and polished TB
TiAL 46mm wastegate/TiAL 50mm BOV
Crooked Willow Racing large SMIC
HKS twin power
**EMISSIONS COMPLIANT W/AIRPUMP**
422rwhp/333ftlb torque @ 15psi on pump gas
FWIW,
Crispy
A-Spec short runner T3 manifold
Medium street port 13B REW
PowerFC
850primary/1300secondary - modified stock rails
Aeromotive FPR (all SS lines)
Dual Denso pumps
portmatched intake manifolds
ported and polished TB
TiAL 46mm wastegate/TiAL 50mm BOV
Crooked Willow Racing large SMIC
HKS twin power
**EMISSIONS COMPLIANT W/AIRPUMP**
422rwhp/333ftlb torque @ 15psi on pump gas
FWIW,
Crispy
07-04-08, 03:11 AM
#411
Full Member
Join Date: Oct 2004
Location: Aucks, NZ
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Below Southern Alps in NZ (older photo, before new kit but I like it 
)
Need to tidy the engine bay up a little!
13B-REW - SCR Seals, R-Magic Stage2 Port, low comp rotors
Greddy T88-34D Turbo
Greddy Exhaust Manifold
Greddy Air Filter
Greddy Pully Kit
Greddy Oil Temp/Boost/Exhaust Temp Gauges
Feed Elbow/Compression tube
HKS F-CON Pro V ECU
HKS Navigator
HKS EVC V Boost Controller
HKS 3" exhaust system
HKS V-Mount Intercooler and Radiator + 2 x 15" Fans
HKS 50mm External Wastegate
Walbro fuel pumps (2x)
Bosch 1300cc Secondary Injectors
SARD Fuel Reg
Mazdaspeed ignition leads
Mazdaspeed Counterweight
Cusco Twin-Plate Clutch
Cusco Lightweight Flywheel
Cusco Strut Brace
Cusco Adjustable Platforms
Cusco Oil Catch Can
Cusco Air Separation Tank
Cusco 2 way Type-RS LSD
Cusco/Safety21 6 Point Roll Cage
Kazama Solid Engine Mounts
Noathalene Diff Mounts
Mazdaspeed Powerplant Frame
FTK 18x9" Wheels
Vanquish Front Bumper
Vertex Side Skirts
Vanquish Rear Bumper
RE-Amemiya Sleek lights
Recaro SR3 Seats
C'S Short Shift Kit
Mazdaspeed Gauge Cluster
389.9kw/522hp
)Need to tidy the engine bay up a little!
13B-REW - SCR Seals, R-Magic Stage2 Port, low comp rotors
Greddy T88-34D Turbo
Greddy Exhaust Manifold
Greddy Air Filter
Greddy Pully Kit
Greddy Oil Temp/Boost/Exhaust Temp Gauges
Feed Elbow/Compression tube
HKS F-CON Pro V ECU
HKS Navigator
HKS EVC V Boost Controller
HKS 3" exhaust system
HKS V-Mount Intercooler and Radiator + 2 x 15" Fans
HKS 50mm External Wastegate
Walbro fuel pumps (2x)
Bosch 1300cc Secondary Injectors
SARD Fuel Reg
Mazdaspeed ignition leads
Mazdaspeed Counterweight
Cusco Twin-Plate Clutch
Cusco Lightweight Flywheel
Cusco Strut Brace
Cusco Adjustable Platforms
Cusco Oil Catch Can
Cusco Air Separation Tank
Cusco 2 way Type-RS LSD
Cusco/Safety21 6 Point Roll Cage
Kazama Solid Engine Mounts
Noathalene Diff Mounts
Mazdaspeed Powerplant Frame
FTK 18x9" Wheels
Vanquish Front Bumper
Vertex Side Skirts
Vanquish Rear Bumper
RE-Amemiya Sleek lights
Recaro SR3 Seats
C'S Short Shift Kit
Mazdaspeed Gauge Cluster
389.9kw/522hp
Last edited by Dezigns; 07-04-08 at 03:14 AM. Reason: edit
07-16-08, 08:14 PM
#412
GT35R .70A/R 1.06 hotside
A-Spec short runner T3 manifold
Medium street port 13B REW
PowerFC
850primary/1300secondary - modified stock rails
Aeromotive FPR (all SS lines)
Dual Denso pumps
portmatched intake manifolds
ported and polished TB
TiAL 46mm wastegate/TiAL 50mm BOV
Crooked Willow Racing large SMIC
HKS twin power
**EMISSIONS COMPLIANT W/AIRPUMP**
422rwhp/333ftlb torque @ 15psi on pump gas
FWIW,
Crispy
A-Spec short runner T3 manifold
Medium street port 13B REW
PowerFC
850primary/1300secondary - modified stock rails
Aeromotive FPR (all SS lines)
Dual Denso pumps
portmatched intake manifolds
ported and polished TB
TiAL 46mm wastegate/TiAL 50mm BOV
Crooked Willow Racing large SMIC
HKS twin power
**EMISSIONS COMPLIANT W/AIRPUMP**
422rwhp/333ftlb torque @ 15psi on pump gas
FWIW,
Crispy
07-26-08, 12:30 PM
#414
1984 GSL
Steetport 13B-RE
ExtrudeHone UIM & LIM
T4 GT35R 1.00 hotside
Homemade Short Runner Sch 40 Mild Steel Exh Mani
Twin TiAL 44mm WGs/TiAL 50mm BOV
4 X 1680cc Injectors -- modified FC Pri Rail, modified Cosmo Sec Rail
Sard Race FPR
Boosted Bosch -044 Pump, fed from in-tank swirl pot
Ported and Polished TB
M2R & Twin MSD DIS-4 HO
429 RWHP @ 13.5 PSI (same setup, but with my old 60-1 turbo)
BTW -- the engine bay pic is about a year old, showing the 60-1 with a single WG, but it hasn't changed much since then.
Steetport 13B-RE
ExtrudeHone UIM & LIM
T4 GT35R 1.00 hotside
Homemade Short Runner Sch 40 Mild Steel Exh Mani
Twin TiAL 44mm WGs/TiAL 50mm BOV
4 X 1680cc Injectors -- modified FC Pri Rail, modified Cosmo Sec Rail
Sard Race FPR
Boosted Bosch -044 Pump, fed from in-tank swirl pot
Ported and Polished TB
M2R & Twin MSD DIS-4 HO
429 RWHP @ 13.5 PSI (same setup, but with my old 60-1 turbo)
BTW -- the engine bay pic is about a year old, showing the 60-1 with a single WG, but it hasn't changed much since then.
08-08-08, 12:20 AM
#415
Full Member
Join Date: Mar 2008
Location: orlando, FL.
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Vert rx-7
Turbo: Holset HE341/ Similar to the Holset HE55
Boost: Not sure how high a stock TII can handle
Manifold: SS Auto Chrome
Wastegate: XS Power 38mm
Injectors: 550cc prim
Ignition:Stock power
RWHP: yet to test
I could use some help with figurung out what kind of PSI a stock TII can handle with my Holset HE341 turbo. I have currently a stock N/A 88 Vert. But im Getting a 10th Ann. TII Engine & tranny set. Not sure what that can handle. Here's some pics of the turbo setup i have.
Thats about it so far. Feel free to PM me with your input.
Turbo: Holset HE341/ Similar to the Holset HE55
Boost: Not sure how high a stock TII can handle
Manifold: SS Auto Chrome
Wastegate: XS Power 38mm
Injectors: 550cc prim
Ignition:Stock power
RWHP: yet to test
I could use some help with figurung out what kind of PSI a stock TII can handle with my Holset HE341 turbo. I have currently a stock N/A 88 Vert. But im Getting a 10th Ann. TII Engine & tranny set. Not sure what that can handle. Here's some pics of the turbo setup i have.
Thats about it so far. Feel free to PM me with your input.
08-14-08, 12:30 PM
#416
bcrotary.com
Join Date: Apr 2005
Location: Vancouver
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
87 T2
13B-RE, 1/2 bridge (built and tuned by forcefedracing.ca)
GT4202R, Tial 60mm
Custom long tube Mani (built by turblown.net)
800/1680
custom rails, stainless lines. Aeromotive FPR
044 inline, cosmo in tank 1 liter surge tank
Microtech LT10x
Bosch coils
602 @ 22 psi, need more primaries to run more boost.
13B-RE, 1/2 bridge (built and tuned by forcefedracing.ca)
GT4202R, Tial 60mm
Custom long tube Mani (built by turblown.net)
800/1680
custom rails, stainless lines. Aeromotive FPR
044 inline, cosmo in tank 1 liter surge tank
Microtech LT10x
Bosch coils
602 @ 22 psi, need more primaries to run more boost.
08-28-08, 06:06 PM
#417
Junior Member
Join Date: Aug 2008
Location: Japan
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Well i'm new and havn't done HP yet but i'll post up once i do but this is my
Single Turbo set up
Apexi way to big boost gauge
Greddy water temp guage
Apexi Power FC
HKS front mount intercooler
Optima battery in the hatch
Greddy type R bov
Wastegate I think old school hks
Td07 25a turbine
Head’s aluminum ast
Hks cast manifold
Greddy underdrive pully kit
Os giken twin recently rebuilt
Walboro fuel pump
Full exhaust
Greddy elbow
Full custom ss intercooler piping
1200cc primary and 1600 cc secondary i think so
Steel braided lines throughout engine bay for fuel and oil to turbine
Samco silicone hoses
Low temp thermostat
oh ya boosting a low .9 we set the tune low so i can still daily drive, i think i'm going to keep it so it's better for Drift
Single Turbo set up
Apexi way to big boost gauge
Greddy water temp guage
Apexi Power FC
HKS front mount intercooler
Optima battery in the hatch
Greddy type R bov
Wastegate I think old school hks
Td07 25a turbine
Head’s aluminum ast
Hks cast manifold
Greddy underdrive pully kit
Os giken twin recently rebuilt
Walboro fuel pump
Full exhaust
Greddy elbow
Full custom ss intercooler piping
1200cc primary and 1600 cc secondary i think so
Steel braided lines throughout engine bay for fuel and oil to turbine
Samco silicone hoses
Low temp thermostat
oh ya boosting a low .9 we set the tune low so i can still daily drive, i think i'm going to keep it so it's better for Drift
08-28-08, 06:20 PM
#418
I Dislike Everything
iTrader: (1)
Join Date: Apr 2002
Location: St. Louis/Southern Illinois
Posts: 3,701
Likes: 0
Received 7 Likes
on
7 Posts
87 T2
13B-RE, 1/2 bridge (built and tuned by forcefedracing.ca)
GT4202R, Tial 60mm
Custom long tube Mani (built by turblown.net)
800/1680
custom rails, stainless lines. Aeromotive FPR
044 inline, cosmo in tank 1 liter surge tank
Microtech LT10x
Bosch coils
602 @ 22 psi, need more primaries to run more boost.
13B-RE, 1/2 bridge (built and tuned by forcefedracing.ca)
GT4202R, Tial 60mm
Custom long tube Mani (built by turblown.net)
800/1680
custom rails, stainless lines. Aeromotive FPR
044 inline, cosmo in tank 1 liter surge tank
Microtech LT10x
Bosch coils
602 @ 22 psi, need more primaries to run more boost.
09-01-08, 10:27 PM
#419
Junior Member
iTrader: (34)
Join Date: Nov 2004
Location: AZ
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
stock port 13b-REW
T4 GT-35R
greddy long runner manifold
greddy type R external gate
CJ-motorsports fuel system 750/1680s
M2 large stockmount
440RWHP and 370tq@ 18.5psi
T4 GT-35R
greddy long runner manifold
greddy type R external gate
CJ-motorsports fuel system 750/1680s
M2 large stockmount
440RWHP and 370tq@ 18.5psi
Last edited by dregg100; 09-01-08 at 10:30 PM.
09-05-08, 09:48 PM
#421
bcrotary.com
Join Date: Apr 2005
Location: Vancouver
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
87 T2
13B-RE, 1/2 bridge (built and tuned by forcefedracing.ca)
GT4202R, Tial 60mm
Custom long tube Mani (built by turblown.net)
800/1680
custom rails, stainless lines. Aeromotive FPR
044 inline, cosmo in tank 1 liter surge tank
Microtech LT10x
Bosch coils
602 @ 22 psi, need more primaries to run more boost.
13B-RE, 1/2 bridge (built and tuned by forcefedracing.ca)
GT4202R, Tial 60mm
Custom long tube Mani (built by turblown.net)
800/1680
custom rails, stainless lines. Aeromotive FPR
044 inline, cosmo in tank 1 liter surge tank
Microtech LT10x
Bosch coils
602 @ 22 psi, need more primaries to run more boost.
09-05-08, 10:06 PM
#422
Derwin
iTrader: (2)
Join Date: Apr 2005
Location: MTL, QC
Posts: 2,888
Likes: 0
Received 0 Likes
on
0 Posts
GT35R .70A/R 1.06 hotside
A-Spec short runner T3 manifold
Medium street port 13B REW
PowerFC
850primary/1300secondary - modified stock rails
Aeromotive FPR (all SS lines)
Dual Denso pumps
portmatched intake manifolds
ported and polished TB
TiAL 46mm wastegate/TiAL 50mm BOV
Crooked Willow Racing large SMIC
HKS twin power
**EMISSIONS COMPLIANT W/AIRPUMP**
422rwhp/333ftlb torque @ 15psi on pump gas
FWIW,
Crispy
A-Spec short runner T3 manifold
Medium street port 13B REW
PowerFC
850primary/1300secondary - modified stock rails
Aeromotive FPR (all SS lines)
Dual Denso pumps
portmatched intake manifolds
ported and polished TB
TiAL 46mm wastegate/TiAL 50mm BOV
Crooked Willow Racing large SMIC
HKS twin power
**EMISSIONS COMPLIANT W/AIRPUMP**
422rwhp/333ftlb torque @ 15psi on pump gas
FWIW,
Crispy
09-06-08, 12:19 PM
#423
Boost is linear as you would expect. Anything above 4k and boost is virtually instantaneous. A lot of work was done sizing the turbo for track use and IMHO it's spot on. As responsive as the twins from about 3500rpm and up and not far off below that.
FWIW,
Crispy
09-06-08, 05:22 PM
#424
Derwin
iTrader: (2)
Join Date: Apr 2005
Location: MTL, QC
Posts: 2,888
Likes: 0
Received 0 Likes
on
0 Posts
Sweet,
When I get to go single I want to retain my M2 Med IC and M2 CF Intake so if this turbo can fit it and do what you say, I think it would be perfect for 90% street duty.
What kind of porting do you have?
When I get to go single I want to retain my M2 Med IC and M2 CF Intake so if this turbo can fit it and do what you say, I think it would be perfect for 90% street duty.
What kind of porting do you have?