Dual EGT probes and water injection have been installed.
#1
(_8(|)
Thread Starter
Join Date: Jul 2004
Location: Manhattan, Kansas
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Dual EGT probes and water injection have been installed.
I had the bungs installed today for my pineapple dual EGT gauge, Local friend hooked me up!
How many other people are running this?
And my water injection nozzle.......We have a washer holding it in, sealing it is a rubber grommet, and some rtv on the threads/on the grommet. Anybody have experience/feedback on their similar install?
Questions/comments?
How many other people are running this?
And my water injection nozzle.......We have a washer holding it in, sealing it is a rubber grommet, and some rtv on the threads/on the grommet. Anybody have experience/feedback on their similar install?
Questions/comments?
#2
Rotary Enthusiast
iTrader: (3)
Join Date: Jan 2007
Location: st. louis
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
i will be running something liek what you are doing. its an aspec 500r kit with 1 egt/rotor and i going to run meth injection. I am not running the pineapple setup. I am going to run my zeitronix wideband/egt and run a switch so i can see/log both egts. what turbo/boost are you running
#4
Crash Auto?Fix Auto.
iTrader: (3)
I'm running the pineapple dual EGT as well. Great unit, mine are simply tapped into my greddy log mani. though.
My AI is snowperformance so the nozzles need to be tapped into place also. Its in my higgi TB elbow, so I can't offer any advice on sealing that nozzle in there. Is that an alkycontrol kit?
My AI is snowperformance so the nozzles need to be tapped into place also. Its in my higgi TB elbow, so I can't offer any advice on sealing that nozzle in there. Is that an alkycontrol kit?
#6
I have the water injection and the bungs all welded into the mani and dp for the EGT but I haven't decided which way to go for the EGT yet. I think I am not going to do a gauge and instead do probes that go to a 0-5v translation board and then to my dataloggit. This way I can log them as auxillary inputs next to AFR, boost pressure and RPM.
At least that is my idea...we will see how it plays out.
At least that is my idea...we will see how it plays out.
Trending Topics
#9
(_8(|)
Thread Starter
Join Date: Jul 2004
Location: Manhattan, Kansas
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
http://www.pineappleracing.com/index...PROD&ProdID=24
I got in on the group buy a while back, so it was a little cheaper.
#11
Mad Man
iTrader: (5)
I will be running two 3/16 exposed tip thermocouples
http://redlinegauges.com/product_inf...8210c2fe57840e
Datalogging with these to my datalogit
http://www.o2simulator.com/index.php...5fa12c2f9642d5
Total cost is around 200 for the everything as long as you have a way of datalogging. I am not a gauge guy as you should be keeping your eyes on the road instead of on your gauges while making runs. Of course I road tune rather than dyno tune. I did have one probe after the turbine and it reacted basically instantaniously but this new setup should allow me to better balance the rotors fuel.
http://redlinegauges.com/product_inf...8210c2fe57840e
Datalogging with these to my datalogit
http://www.o2simulator.com/index.php...5fa12c2f9642d5
Total cost is around 200 for the everything as long as you have a way of datalogging. I am not a gauge guy as you should be keeping your eyes on the road instead of on your gauges while making runs. Of course I road tune rather than dyno tune. I did have one probe after the turbine and it reacted basically instantaniously but this new setup should allow me to better balance the rotors fuel.
#15
BDC Motorsports
400?? where'd you hear that from? lol....unless of course it was a type-o
http://www.pineappleracing.com/index...PROD&ProdID=24
I got in on the group buy a while back, so it was a little cheaper.
http://www.pineappleracing.com/index...PROD&ProdID=24
I got in on the group buy a while back, so it was a little cheaper.
http://www.pegasusautoracing.com/pro...asp?RecId=4861 There's your Pineapple gauge, more or less. Notice the price difference.
http://www.aircraftspruce.com/menus/in/egtgauges.html
http://www.pegasusautoracing.com/gro...oupID=GAUGEEGT This was the $400+ setup I was referring to.
B
#18
FD pro licensed driver
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
#19
(_8(|)
Thread Starter
Join Date: Jul 2004
Location: Manhattan, Kansas
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Wasn't a typo and I wasn't referring to that cheap gauge, either.
http://www.pegasusautoracing.com/pro...asp?RecId=4861 There's your Pineapple gauge, more or less. Notice the price difference.
http://www.aircraftspruce.com/menus/in/egtgauges.html
http://www.pegasusautoracing.com/gro...oupID=GAUGEEGT This was the $400+ setup I was referring to.
B
http://www.pegasusautoracing.com/pro...asp?RecId=4861 There's your Pineapple gauge, more or less. Notice the price difference.
http://www.aircraftspruce.com/menus/in/egtgauges.html
http://www.pegasusautoracing.com/gro...oupID=GAUGEEGT This was the $400+ setup I was referring to.
B
Elliot will be up here 14-17th for tuning