any one running a turbo from cheapturbo.com
10-10-04, 12:45 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2003
Location: San Jose, Ca
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
any one running a turbo from cheapturbo.com
any one running a turbo from cheapturbo.com, if so let me know wat number and which one you guys are running
thanks
eden
thanks
eden
10-10-04, 04:02 PM
#3
Learned alot | Alot to go
iTrader: (2)
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
I ordered a T04s with a 1.0 devided hotside p-trim wheel, wet barrings hpc coated bla bla, however its on a crazy backorder due to them not recieving any 1.0 hotside housings for over a month now.
Ill get it someday
-Jacob
Ill get it someday
-Jacob
10-10-04, 07:16 PM
#4
Bridgeport Anyone??
wow, same thing as me. I ordered a TO4R with a 1.0 divided p-trim. They have been back ordered forever!! Good thing I'm the first on the list!!! Muwahaha. I'll post pics when I get it. Later guys.
Mike
Mike
10-10-04, 08:33 PM
#5
Injected with a Poison
iTrader: (1)
Join Date: Jul 2003
Location: Miami, FL
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
i purchased a TO4R with a .96 a/r tangental non ball bearing with p wheel so far car feel real well but we will be taking it to the dyno in about a week or so. does feel a little more laggy than my last turbo. but then again my last turbo was a TS04 with a .70 a/r. you guys might want to wait a little bit so i can give my numbers in compairason to my last turbo. 1.0 a/r may be a bit big.
Trending Topics
10-11-04, 10:16 AM
#8
Rebreaking things
Join Date: Jun 2001
Location: 1 foot in Boston 1 in NJ
Posts: 2,586
Likes: 0
Received 0 Likes
on
0 Posts
I ordered a GT35R Blowzilla from Ken at cheap turbo with a 1.00 divided hot side. They didn't have the hot side in stock, but it only took them about a week to get. I also had them weld on a v-band flange and it came out great.
10-11-04, 05:32 PM
#11
Rotary Enthusiast
i got the hks cast manifold. if you do the t3/t04e route then your gonna have to use the stock manifold which doesnt have a spot for a wastegate or our gonna have to use a turbo with a built in wastegate.
10-11-04, 06:31 PM
#16
Learned alot | Alot to go
iTrader: (2)
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
I think i shall call them tommorow, ive called them every week or so just to see whats up, ken has been very helpfull and upfront, cant wait for mine!
to4s 1.0 devided wet barrigns hpc coated, comp polished, got the cnc'd flanges and vband welded on, g'damn thing making me poor
to4s 1.0 devided wet barrigns hpc coated, comp polished, got the cnc'd flanges and vband welded on, g'damn thing making me poor
10-12-04, 04:31 PM
#20
Learned alot | Alot to go
iTrader: (2)
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
I called today, My hotside has been welded and is inroute to get HPC coated, Ken said it should be back, assembled and i should be able to call for a tracking # this friday. Ho-Ray!
-Jacob
-Jacob
10-16-04, 08:39 PM
#22
Learned alot | Alot to go
iTrader: (2)
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
mine was 1126 shipped
I got a bunch of extra's though
TO4S .60 cold side 1.0 devided hotside
polished comp housing - $60
hpc coated hot side - $60
wet barrings - ?? $$$$$$$$$$
vband kit welded on, $115
and i got the cnc'd coolent flanges
and probably other stuff too
-Jacob
I got a bunch of extra's though
TO4S .60 cold side 1.0 devided hotside
polished comp housing - $60
hpc coated hot side - $60
wet barrings - ?? $$$$$$$$$$
vband kit welded on, $115
and i got the cnc'd coolent flanges
and probably other stuff too
-Jacob
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
