any one running a turbo from cheapturbo.com, if so let me know wat number and which one you guys are running



thanks
eden

 

bump...........

 

I ordered a T04s with a 1.0 devided hotside p-trim wheel, wet barrings hpc coated bla bla, however its on a crazy backorder due to them not recieving any 1.0 hotside housings for over a month now.

Ill get it someday

-Jacob

 

wow, same thing as me. I ordered a TO4R with a 1.0 divided p-trim. They have been back ordered forever!! Good thing I'm the first on the list!!! Muwahaha. I'll post pics when I get it. Later guys.
Mike

 

i purchased a TO4R with a .96 a/r tangental non ball bearing with p wheel so far car feel real well but we will be taking it to the dyno in about a week or so. does feel a little more laggy than my last turbo. but then again my last turbo was a TS04 with a .70 a/r. you guys might want to wait a little bit so i can give my numbers in compairason to my last turbo. 1.0 a/r may be a bit big.

 

i also got a t04r p-trim .96 ar tang with .7 ar cold side form them. oil cooled only.

 

I'm running a 1.00 hotside from them...pleased so far. Breaking in engine; 5k, 4-5psi the car feels strong.

 

I ordered a GT35R Blowzilla from Ken at cheap turbo with a 1.00 divided hot side. They didn't have the hot side in stock, but it only took them about a week to get. I also had them weld on a v-band flange and it came out great.

 

wat manifold are you guys using? fd or fc?

 

im thinking about getting the garrett t3/to4e 60 trim w/.82 turbine. i was wondering if that would push me to about 300-350rwph?

 

i got the hks cast manifold. if you do the t3/t04e route then your gonna have to use the stock manifold which doesnt have a spot for a wastegate or our gonna have to use a turbo with a built in wastegate.

 

Crusader 9x how much hp are you running?

 

Mine just shipped today!! TO4R 1.0 A/R Woohoo!!

 

CrackHead, yours should be in the mail soon too

 

does the 1.0 a/r take some time to boost?

 

I think i shall call them tommorow, ive called them every week or so just to see whats up, ken has been very helpfull and upfront, cant wait for mine!

to4s 1.0 devided wet barrigns hpc coated, comp polished, got the cnc'd flanges and vband welded on, g'damn thing making me poor

 

do you have a fc or fd?

 

FC

T04S 60-1 .70cold/.96hot undivided tangential dry.

Works pretty good

HKS manifold and wastegate.

 

my gt40 blowzilla with .96 hotside got despatched yesterday...........cant wait!!!!

 

I called today, My hotside has been welded and is inroute to get HPC coated, Ken said it should be back, assembled and i should be able to call for a tracking # this friday. Ho-Ray!

-Jacob

 

how much did you guys spend on the turbo setup?

 

mine was 1126 shipped

I got a bunch of extra's though

TO4S .60 cold side 1.0 devided hotside

polished comp housing - $60
hpc coated hot side - $60
wet barrings - ?? $$$$$$$$$$
vband kit welded on, $115

and i got the cnc'd coolent flanges

and probably other stuff too

-Jacob

 

Yeah my total was 1110 I think
V-Band kit
1/8in NPT for oil feed line