SouthSideSlider

I think ill go too prob be in the s40 as i doubt the fc will be running in time

Slevin_FD

iTrader: (26)

We need to all get together for a state wide meet and greet. I've got the Charleston area covered. Could someone talk to the midlands and upstate crews and see what's good for everyone. Probably a Saturday. sometime in feburary We could all have a cruise , play some pool and cook out.

rotarycrazy

iTrader: (8)

what we used to do is gather in the upstate and go for a drive in the mountains and then cook out at my house afterwards. Granted a whole lot of stuff has changed in the last couple of years but I am pretty sure I could get something like that aranged once more if anyone would be interested but it would have to be in april or around there just due to the simple fact of it being cold especially in the mountains.

NoviceRotaryTech.

I like your enthusiasm to get the rx7 meets going again, Chris. But there's one issue: Is everyone's rx7 or rotary powered vehicle running at the moment?

But I guess we could get together no matter if our rotary is running or not.

And btw, **** going for a mtn run when its cold.
Although it is cool to see your engine temps do down while on some roads up there.

rxtasy3

iTrader: (2)

yep.

another issue i believe is some may have to work. not that i would but i have read where some couldn't make a meet or show up late due to work.

NoviceRotaryTech.

So ill throw an idea out there.

How bout a meet in May. We could do a BBQ. If its held down in Charleston, we could do a "Bridge run."
Depending on whats happening around the city at the time, we could go hang out at an auto-x, the drag-strip, a car show.

It could be like an after-party from DGRR. lol.

There's enough time to make sure your cars running and get more interest in it. Should be nice weather too.

Slevin_FD

iTrader: (26)

well I just got my much larger turbo in the mail, and once i find some spare parts I'll be running again. Might have to do some welding on my DP but whatever. But frankly I'm thinking about selling and buying another FD.

Slevin_FD

iTrader: (26)

I'm gonna do something I'm not supposed to do. So don't tell anyone outside this thread. but Zero-g motorsports ( my company) is gonna be doing a GB before deals gap to help get everyone running and looking spiffy on ID injectors and Haltech Sprint RE's , Plug and play's for the FC and FD as well as PS1000's and 2000's.

Joesrx7fd

We will be going again this year and if we are still here in North Myrle Beach, we will leave some time thursday. we have watershed cabin 7. we are not sure if we are bring 2 or all three of the rx's ( the FD is coming fr sure)

project7s

iTrader: (5)

I'm in greenville and both me and my girlfriend drive fb's, and hopeing to make it to the gap

SouthSideSlider

Hey chris if you think we can get it wanna try and get the fc running for deals gap?

Slevin_FD

iTrader: (26)

that depends on what you want to do. Rebuild, Swap? Yea that can be done in a week or so. The hybrid? That's really up to you, but I can get you the parts.

Slevin_FD

iTrader: (26)

For those of you who have not previously driven on the dragon. Please take the 7:00 minutes and watch this so you have a better idea of exactly what your getting into.
http://www.youtube.com/watch?feature...&v=K16YnmJN0fc

NoviceRotaryTech.

^ the best statement of that video at 1:31.

Here's a video that will give you the idea of the amount of curves on the dragon.
Its time lapsed so that's why it seems fast paced.
http://www.youtube.com/watch?v=0uqPG...eature=related

t_g_farrell

iTrader: (1)

Love those last two videos. Hope to see you all there this year.

Slevin_FD

iTrader: (26)

Personally I prefer the Hellbender to the dragon, but you get to drive both either way.
http://www.youtube.com/watch?v=tVZyiApXhw8

Rx7Fury1

Hey everyone, it has been such a long time that I have been to the forum, that I forgot my old user name. I am out of Charleston, and currently have a little more work to do on my car. Ernst at Rx7world was supposed to have finished it all, but instead he decided to take advantage of me. So needless to say I have some work to do.
This is Landon, and I know some of your names look familiar but I am just trying to get back in the game. Hope everyone is doing well. I am down for getting together at the next meet. I have a pretty big house and yard in West Ashley, I would be more than willing to host.

NoviceRotaryTech.

Hey Landon.
I found your username: Pepsi87
lol
I just did a search of your name and found it in a similar roll call thread back in 2005.

-Toby.

Slevin_FD

iTrader: (26)

First of all welcome back. I can't remember if we've met before, but I'm Chris. Local engine builder, parts supplier ect ect. But most importantly I'm an all around cool guy. Let me know what you need done and we will get you running ASAP. Deal's Gap cometh.

20B10AE

iTrader: (14)

L A N D O N ! ! ! ! What's up, man? Good to see you're still around. I was just asking a few weeks ago if anyone ever heard from you anymore. I hope to catch up with you soon.

Slevin_FD

iTrader: (26)

That's where I heard his name recently. We need to meet up at the house again soon. Landon shoot me a PM and I'll get you hack in tough with the group.

Rx7Fury1

Hey guys, thanks for the warm welcome back. My hopes are to get the FD running 100% by the end of year, and then start working on the cosmetics later on. I was told that the engine has low compression, and that the engine needs to be rebuilt. I have yet to run a compression check myself to confirm. I doubt I will be able to make it to DG, but hopefully next year. Chris, where is your shop located in summerville? I work out here, and I would love to come by and talk rotary.

Slevin_FD

iTrader: (26)

the shop proper if you can call it that is in Jedburg not to far from my house. I'm a startup so it's still small and my co-workers are not very rotary savvy. German cars are a different story though. As far as talking rotary we can do that anytime. Here is my number. 843-478-9898 . Rebuilds are usually done within a week unless you want porting. Then I work slower because that's my signature thing. I've got an awesome extended port that everyone seems to love. I do harnesses, and sell haltech's, ID injectors and some other choice parts. So basically you tell me how fast you want to be and I make suggestions based on that.

Rx7Fury1

I work for Pepsi in Jedburg, were in Jedburg is it?

Slevin_FD

iTrader: (26)

111 Majoram st. Maybe a mile and a half up the road from you. head toward the Hess and make the left over the tracks. then go down until you see unlimited auto sales. I'm on the road right before on the right.