Old guys with 12As club meeting
10-06-09, 01:32 PM
#7676
You're right Brett, they do look good. Don't pay any attention to Ray. He may be our spiritual OGTA leader, but he takes a while to warm up to whole back porting scene. It took me years to get him to go to the 2GDFI. Give him a little time. He will end up with the ReSpeed CAI set up and 2nd gen strut covers.
See you guys tonight.
I thought they looked good...See you guys tonight.
10-06-09, 02:26 PM
#7677
I didn't say they didn't look good, I said they don't look Old School. I'm still trying to decide if CAI counts for Old School, kind of a cool mod but you've got to lose your snorkel, one of the most distinguishing feature of SA/FB's.
Since we are talking Old School, we've got to include this beast, the old re-speed mule:
Since we are talking Old School, we've got to include this beast, the old re-speed mule:
10-06-09, 06:20 PM
#7681
I wanna throw this idea out there to all you OGTA, just to see what you all think.
My current plan for the SE and GSL are to strip the fuel injection out of the SE, and replace it with the Holley set up from the GSL (with the new manifold of course) and then to somehow acquire an old Nikki for the GSL and stick it in there to sell a partially running GSL. The rear seal is still either stuck/ broken, but GA Michael said he had a guy who was selling a whole motor sans dizzy for $100. So I'd buy that, swap that one in there, and sell the GSL.
As for the fuel injection set up, I'll probably sell the left over parts...
Comments? Concerns? Free parts for the swap?
Quad
My current plan for the SE and GSL are to strip the fuel injection out of the SE, and replace it with the Holley set up from the GSL (with the new manifold of course) and then to somehow acquire an old Nikki for the GSL and stick it in there to sell a partially running GSL. The rear seal is still either stuck/ broken, but GA Michael said he had a guy who was selling a whole motor sans dizzy for $100. So I'd buy that, swap that one in there, and sell the GSL.
As for the fuel injection set up, I'll probably sell the left over parts...
Comments? Concerns? Free parts for the swap?
Quad
10-06-09, 10:11 PM
#7686
Trip
You'll have to be more specific, which Kevin? There are 4 of us and 1 isn't in the state anymore. LOL!
Ray, thank you SOOOO much for letting me drive your 1st gen! I had a blast. It was good to see familiar faces and some new ones. Can't wait til next month.
As far as the pictures I took, I'm currently uploading them to my computer. Once I'm done with Facebook I'll try to upload them here. I got 31 shots.
Ray, thank you SOOOO much for letting me drive your 1st gen! I had a blast. It was good to see familiar faces and some new ones. Can't wait til next month.
As far as the pictures I took, I'm currently uploading them to my computer. Once I'm done with Facebook I'll try to upload them here. I got 31 shots.
10-06-09, 10:27 PM
#7687
10-6-9 OGTA Meeting
12A Count:
1 RX-3 = 2 12A’s (Billy)
1 REPU = 2 12A’s (Crit)
3 SA’s = 4.5 12A’s (Roland, Cory, Andy)
8 FB’s = 8 12A’s (Mike, Greg the Elder, Greg the Younger, Karl, Chris, Gene, Geraldo, Ray)
2 FC’s = 1 12A (Zach, Collin)
1 RX-8 = 0.125 12A’s (Kevin)
Total 12A’s = 17.625
Not bad for a cloudy dark October evening.
Billy finally shows up in a rotary, a nice 3 with an excellent engine bay which I managed not do get a picture of. Could somebody post this up?
Mr. Roland's very pretty SA comes out of storage for the last 20 years:
12A Count:
1 RX-3 = 2 12A’s (Billy)
1 REPU = 2 12A’s (Crit)
3 SA’s = 4.5 12A’s (Roland, Cory, Andy)
8 FB’s = 8 12A’s (Mike, Greg the Elder, Greg the Younger, Karl, Chris, Gene, Geraldo, Ray)
2 FC’s = 1 12A (Zach, Collin)
1 RX-8 = 0.125 12A’s (Kevin)
Total 12A’s = 17.625
Not bad for a cloudy dark October evening.
Billy finally shows up in a rotary, a nice 3 with an excellent engine bay which I managed not do get a picture of. Could somebody post this up?
Mr. Roland's very pretty SA comes out of storage for the last 20 years:
10-06-09, 10:29 PM
#7689
Mr. RPM
iTrader: (5)
Join Date: Dec 2007
Location: Georgia
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Great meet! Thanks Billy for the drive in the RX3SP - now I need to get started on mine! Thanks Crit for the drive in the 77 REPU brings back alot of memories - way cool! Now its time to start shopping for a REPU project 
The SA drove home flawlessly. Dunno maybe its cobwebs due to 21 years in storage 
The SA drove home flawlessly. Dunno maybe its cobwebs due to 21 years in storage
10-06-09, 10:39 PM
#7693
Damn. There was a meeting tonight?! I wanted to have you all look at the 12A!!! I thought they were on Thursdays!?
Damnit all.
And he means me on the Kevin phone number. He's hooking me up with a motor.
Quad
Damnit all.
And he means me on the Kevin phone number. He's hooking me up with a motor.
Quad
10-06-09, 10:43 PM
#7694
Trip
The pictures came out great Ray! Seeing a picture of mine makes me want to continue with my plans to mod it instead of another car. It'll be a miracle if I ever make up my mind.
I'm having issues uploading mine to the forum. I have them on Facebook if anyone wants to look me up, otherwise I'll just try again tomorrow.
You all have some nice and unique 7s. I thoroughly enjoy being around you all.
I'm having issues uploading mine to the forum. I have them on Facebook if anyone wants to look me up, otherwise I'll just try again tomorrow.
You all have some nice and unique 7s. I thoroughly enjoy being around you all.
10-06-09, 10:59 PM
#7696
The good thing about having 4 Kevin's is that at least one of them is bound to show up for a meet. That 8 does have a nice color to it.
Also, I have to share this with ya'll. This just came in from my Canadian buddy Damien:
http://s794.photobucket.com/albums/y...Picture022.flv
'
Also, I have to share this with ya'll. This just came in from my Canadian buddy Damien:
http://s794.photobucket.com/albums/y...Picture022.flv
'
10-07-09, 12:54 AM
#7700
Mr. RPM
iTrader: (5)
Join Date: Dec 2007
Location: Georgia
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=ray green;9546201]10-6-9 OGTA Meeting
12A Count:
1 RX-3 = 2 12A’s (Billy)
1 REPU = 2 12A’s (Crit)
3 SA’s = 4.5 12A’s (Roland, Cory, Andy)
8 FB’s = 8 12A’s (Mike, Greg the Elder, Greg the Younger, Karl, Chris, Gene, Geraldo, Ray)
2 FC’s = 1 12A (Zach, Collin)
1 RX-8 = 0.125 12A’s (Kevin)
Total 12A’s = 17.625
Not bad for a cloudy dark October evening.
Billy finally shows up in a rotary, a nice 3 with an excellent engine bay which I managed not do get a picture of. Could somebody post this up?
I cannot find my others pictures. These are the only ones I can find at the moment.
12A Count:
1 RX-3 = 2 12A’s (Billy)
1 REPU = 2 12A’s (Crit)
3 SA’s = 4.5 12A’s (Roland, Cory, Andy)
8 FB’s = 8 12A’s (Mike, Greg the Elder, Greg the Younger, Karl, Chris, Gene, Geraldo, Ray)
2 FC’s = 1 12A (Zach, Collin)
1 RX-8 = 0.125 12A’s (Kevin)
Total 12A’s = 17.625
Not bad for a cloudy dark October evening.
Billy finally shows up in a rotary, a nice 3 with an excellent engine bay which I managed not do get a picture of. Could somebody post this up?
I cannot find my others pictures. These are the only ones I can find at the moment.