Old guys with 12As club meeting
#6851
Moderator
iTrader: (2)
A little FB artwork anyone?
https://www.rx7club.com/1st-gen-general-discussion-207/little-digital-photoshop-fb-art-i-did-859816/
https://www.rx7club.com/1st-gen-general-discussion-207/little-digital-photoshop-fb-art-i-did-859816/
#6852
Mr. RPM
iTrader: (5)
Join Date: Dec 2007
Location: Georgia
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Yes it was turbo - but my point was that even though it was a nikki you can make em run good. There was also a video that I will post if i can find it of a 1st gen FB turbo with a nikki on it from Rotary Shack out running a mustang 5.0!
#6853
Sorry to burst the really fast 12A bubble, but I'm in need of assistance for installation of my new fuel injectors and master cylinder. Anyone?
Also, does anyone have an idea why my windshield wipers don't work? I really don't wanna spend $500 to get two new motors...
Quad
Also, does anyone have an idea why my windshield wipers don't work? I really don't wanna spend $500 to get two new motors...
Quad
#6854
No distributor? No thanks
iTrader: (6)
Join Date: Oct 2003
Location: Outskirts of Road Atlanta
Posts: 3,438
Likes: 0
Received 6 Likes
on
4 Posts
Kevin, we don't know why they don't work without looking at them. The good news is that you've only got one motor, and used motors/assemblies can be found pretty easily.
I'm off tomorrow (Friday) and in Sugar Hill, so you're welcome to come by if you have time. I can help you with the injectors and master cylinder.
I'm off tomorrow (Friday) and in Sugar Hill, so you're welcome to come by if you have time. I can help you with the injectors and master cylinder.
#6855
Kevin, we don't know why they don't work without looking at them. The good news is that you've only got one motor, and used motors/assemblies can be found pretty easily.
I'm off tomorrow (Friday) and in Sugar Hill, so you're welcome to come by if you have time. I can help you with the injectors and master cylinder.
I'm off tomorrow (Friday) and in Sugar Hill, so you're welcome to come by if you have time. I can help you with the injectors and master cylinder.
Thanks in advance
Quad
#6856
Needs More Noise
iTrader: (12)
Who is down for the doublecross event in november?
http://www.soloatlanta.com/doublex/dxc_video_small.htm
Looks to be a pretty cool alternative to autox.
Oh yea........NITRO CIRCUS new season kicks up tonight. 10PM, MTV.
-billy
http://www.soloatlanta.com/doublex/dxc_video_small.htm
Looks to be a pretty cool alternative to autox.
Oh yea........NITRO CIRCUS new season kicks up tonight. 10PM, MTV.
-billy
#6857
Mr. RPM
iTrader: (5)
Join Date: Dec 2007
Location: Georgia
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Who is down for the doublecross event in november?
http://www.soloatlanta.com/doublex/dxc_video_small.htm
Looks to be a pretty cool alternative to autox.
Oh yea........NITRO CIRCUS new season kicks up tonight. 10PM, MTV.
-billy
http://www.soloatlanta.com/doublex/dxc_video_small.htm
Looks to be a pretty cool alternative to autox.
Oh yea........NITRO CIRCUS new season kicks up tonight. 10PM, MTV.
-billy
#6860
Say hello to Mr.Wankel
iTrader: (7)
Who is down for the doublecross event in november?
http://www.soloatlanta.com/doublex/dxc_video_small.htm
Looks to be a pretty cool alternative to autox.
-billy
http://www.soloatlanta.com/doublex/dxc_video_small.htm
Looks to be a pretty cool alternative to autox.
-billy
#6862
Kevin the Second/Younger, you have a new name - you are now "Deuce". Be good to see you, hope you can talk the FB, the GF and her Datsun into coming too.
Now doubt this truck has a 12A in it, that's the only combination of power and weight that could get it over that hump
Now doubt this truck has a 12A in it, that's the only combination of power and weight that could get it over that hump
#6863
Needs More Noise
iTrader: (12)
You should see the stuff they pull off on that show! Last night he back flipped a dirt bike from one roof top to another. The buildings were 75 foot apart 200 foot+ off the ground.
Last season they went to PR and was drag racing some old school rotaries.
http://nitrocircus.com/2009/04/nitro...0-puerto-rico/
-billy
Last season they went to PR and was drag racing some old school rotaries.
http://nitrocircus.com/2009/04/nitro...0-puerto-rico/
-billy
#6865
URGENT! Crit and I are attempting to get my car out of his driveway. We replaced the fuel injectors, and now the car won't start. We've tested damn near everything. Will anyone be able to meet us at Crit's house around 9am Saturday morning to help us? We've checked everything from the fuel injectors, to the spark plugs, dizzy, coils, MAF, everything...
Call me at 678-994-1545 if you can come and need directions, or just have an idea of something to check...
Call me at 678-994-1545 if you can come and need directions, or just have an idea of something to check...
#6867
Yea, we checked all 5. Replaced one with a standard fuse, Crit had one that would fit all the way down. It seems like it's getting sparks (we tested each spark plug by grounding it on the intake manifold and running the engine), and getting fuel (tested the fuel injectors by strapping them to the rail). We have no idea what else could be wrong except compression...q
#6868
Lots of rotors
iTrader: (33)
Yea, we checked all 5. Replaced one with a standard fuse, Crit had one that would fit all the way down. It seems like it's getting sparks (we tested each spark plug by grounding it on the intake manifold and running the engine), and getting fuel (tested the fuel injectors by strapping them to the rail). We have no idea what else could be wrong except compression...q
But being serious, whenever I replaced the pulsation damper with a banjo bolt on the FC, and the other time when I replaced a leaky fuel line, it wouldn't start just with the key both times afterwards. I had to push start it the first time, and the second it unflooded when I pulled the injector fuse and turned it over and all that crap.
My .02... I'm trying to sound smart like you guys
#6869
Mr. RPM
iTrader: (5)
Join Date: Dec 2007
Location: Georgia
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Yea, we checked all 5. Replaced one with a standard fuse, Crit had one that would fit all the way down. It seems like it's getting sparks (we tested each spark plug by grounding it on the intake manifold and running the engine), and getting fuel (tested the fuel injectors by strapping them to the rail). We have no idea what else could be wrong except compression...q
#6873
And no, we didn't attempt to push start it, but it's on it's way to Mazcare as I type this. Hopefully they'll be able to diagnose and solve the issue.
Quad
#6874
Ouch, sorry to hear that Quad. Was it running before? How did you get it over to Crit's? I was looking forward to meeting you AND the SE on Tuesday, but it sounds like the SE might not make it. Hope to see you though!
Brett you're cruising for a bruising in those fart cannons. Like Crit says, stay out of Pendergrass. And Arcade.
Brett you're cruising for a bruising in those fart cannons. Like Crit says, stay out of Pendergrass. And Arcade.
#6875
I drove it there. The plan was to change out the fuel injectors, seeing as they kept leaking into the chamber, causing a massive amount of smoke, with newly cleaned ones from RC Engineering, along with replace the Master Clutch Cylinder. We got the fuel injectors off, the connectors were kind of sketchy, but we proceeded, then got it all back together, and it wouldn't start. Tried everything from the dizzy, coils, spark plugs, thinking it was missing spark. Eventually we went back into the fuel rail, safety wired the injectors to the rail, and ran it, and it was getting fuel, since both injectors were spraying well. Then we re-checked the ignition system, and even took the spark plugs out, grounded them on the EGI, and finally found a combo of plugs, wires, dizzy, and coil that would get all 4 to fire consistently. Still wouldn't fire when the plugs were in. We checked everything both Crit and I could think of...
Quad
P.S. Crit might possibly be picking me up from work Tuesday, so at least I can make the meet. Just sans RX7.
Quad
P.S. Crit might possibly be picking me up from work Tuesday, so at least I can make the meet. Just sans RX7.